[PATCH v6 01/12] dt-bindings: mfd: gpio: Add MAX7360

[Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>]

Add device tree bindings for Maxim Integrated MAX7360 device with
support for keypad, rotary, gpios and pwm functionalities.

Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
---
 .../bindings/gpio/maxim,max7360-gpio.yaml          |  83 ++++++++++
 .../devicetree/bindings/mfd/maxim,max7360.yaml     | 171 +++++++++++++++++++++
 2 files changed, 254 insertions(+)

diff --git a/Documentation/devicetree/bindings/gpio/maxim,max7360-gpio.yaml b/Documentation/devicetree/bindings/gpio/maxim,max7360-gpio.yaml
new file mode 100644
index 000000000000..21d603d9504c
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/maxim,max7360-gpio.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/maxim,max7360-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX7360 GPIO controller
+
+maintainers:
+  - Kamel Bouhara <kamel.bouhara@bootlin.com>
+  - Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
+
+description: |
+  Maxim MAX7360 GPIO controller, in MAX7360 chipset
+  https://www.analog.com/en/products/max7360.html
+
+  The device provide two series of GPIOs, referred here as GPIOs and GPOs.
+
+  PORT0 to PORT7 pins can be used as GPIOs, with support for interrupts and
+  constant-current mode. These pins will also be used by the torary encoder and
+  PWM functionalities.
+
+  COL2 to COL7 pins can be used as GPOs, there is no input capability. COL pins
+  will be partitionned, with the first pins being affected to the keypad
+  functionality and the last ones as GPOs.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max7360-gpio
+      - maxim,max7360-gpo
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  maxim,constant-current-disable:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Bit field, each bit disables constant-current output of the associated
+      GPIO, starting from the least significant bit for the first GPIO.
+    maximum: 0xff
+
+required:
+  - compatible
+  - gpio-controller
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - maxim,max7360-gpio
+        ngpios: false
+    then:
+      required:
+        - interrupt-controller
+    else:
+      properties:
+        interrupt-controller: false
+        maxim,constant-current-disable: false
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio {
+      compatible = "maxim,max7360-gpio";
+
+      gpio-controller;
+      #gpio-cells = <2>;
+      maxim,constant-current-disable = <0x06>;
+
+      interrupt-controller;
+      #interrupt-cells = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/mfd/maxim,max7360.yaml b/Documentation/devicetree/bindings/mfd/maxim,max7360.yaml
new file mode 100644
index 000000000000..ae3969d8dc8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/maxim,max7360.yaml
@@ -0,0 +1,171 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/maxim,max7360.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX7360 Keypad, Rotary encoder, PWM and GPIO controller
+
+maintainers:
+  - Kamel Bouhara <kamel.bouhara@bootlin.com>
+  - Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
+
+description: |
+  Maxim MAX7360 device, with following functions:
+    - keypad controller
+    - rotary controller
+    - GPIO and GPO controller
+    - PWM controller
+
+  https://www.analog.com/en/products/max7360.html
+
+allOf:
+  - $ref: /schemas/input/matrix-keymap.yaml#
+  - $ref: /schemas/input/input.yaml#
+
+properties:
+  compatible:
+    enum:
+      - maxim,max7360
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 2
+
+  interrupt-names:
+    items:
+      - const: inti
+      - const: intk
+
+  keypad-debounce-delay-ms:
+    description: Keypad debounce delay in ms
+    minimum: 9
+    maximum: 40
+    default: 9
+
+  rotary-debounce-delay-ms:
+    description: Rotary encoder debounce delay in ms
+    minimum: 0
+    maximum: 15
+    default: 0
+
+  linux,axis:
+    $ref: /schemas/input/rotary-encoder.yaml#/properties/linux,axis
+
+  "#pwm-cells":
+    const: 3
+
+  gpio:
+    $ref: /schemas/gpio/maxim,max7360-gpio.yaml#
+    description:
+      PORT0 to PORT7 general purpose input/output pins configuration.
+
+  gpo:
+    $ref: /schemas/gpio/maxim,max7360-gpio.yaml#
+    description: >
+      COL2 to COL7 general purpose output pins configuration. Allows to use
+      unused keypad columns as outputs.
+
+      The MAX7360 has 8 column lines and 6 of them can be used as GPOs. GPIOs
+      numbers used for this gpio-controller node do correspond to the column
+      numbers: values 0 and 1 are never valid, values from 2 to 7 might be valid
+      depending on the value of the keypad,num-column property.
+
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: /schemas/pinctrl/pincfg-node.yaml
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: '^(PORT[0-7]|ROTARY)$'
+        minItems: 1
+        maxItems: 8
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [gpio, pwm, rotary]
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - linux,keymap
+  - linux,axis
+  - "#pwm-cells"
+  - gpio
+  - gpo
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      io-expander@38 {
+        compatible = "maxim,max7360";
+        reg = <0x38>;
+
+        interrupt-parent = <&gpio1>;
+        interrupts = <23 IRQ_TYPE_LEVEL_LOW>,
+                     <24 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-names = "inti", "intk";
+
+        keypad,num-rows = <8>;
+        keypad,num-columns = <4>;
+        linux,keymap = <
+          MATRIX_KEY(0x00, 0x00, KEY_F5)
+          MATRIX_KEY(0x01, 0x00, KEY_F4)
+          MATRIX_KEY(0x02, 0x01, KEY_F6)
+          >;
+        keypad-debounce-delay-ms = <10>;
+        autorepeat;
+
+        rotary-debounce-delay-ms = <2>;
+        linux,axis = <0>; /* REL_X */
+
+        #pwm-cells = <3>;
+
+        max7360_gpio: gpio {
+          compatible = "maxim,max7360-gpio";
+
+          gpio-controller;
+          #gpio-cells = <2>;
+          maxim,constant-current-disable = <0x06>;
+
+          interrupt-controller;
+          #interrupt-cells = <0x2>;
+        };
+
+        max7360_gpo: gpo {
+          compatible = "maxim,max7360-gpo";
+
+          gpio-controller;
+          #gpio-cells = <2>;
+        };
+
+        backlight_pins: backlight-pins {
+          pins = "PORT2";
+          function = "pwm";
+        };
+      };
+    };

-- 
2.39.5