[PATCH AUTOSEL 5.10 5/6] HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY

[PATCH AUTOSEL 5.10 5/6] HID: Add IGNORE quirk for SMARTLINKTECHNOLOGY

[Sasha Levin]

From: Zhang Heng <zhangheng@kylinos.cn>

[ Upstream commit 1a8953f4f7746c6a515989774fe03047c522c613 ]

MARTLINKTECHNOLOGY is a microphone device, when the HID interface in an
audio device is requested to get specific report id, the following error
may occur.

[  562.939373] usb 1-1.4.1.2: new full-speed USB device number 21 using xhci_hcd
[  563.104908] usb 1-1.4.1.2: New USB device found, idVendor=4c4a, idProduct=4155, bcdDevice= 1.00
[  563.104910] usb 1-1.4.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  563.104911] usb 1-1.4.1.2: Product: USB Composite Device
[  563.104912] usb 1-1.4.1.2: Manufacturer: SmartlinkTechnology
[  563.104913] usb 1-1.4.1.2: SerialNumber: 20201111000001
[  563.229499] input: SmartlinkTechnology USB Composite Device as /devices/pci0000:00/0000:00:07.1/0000:04:00.3/usb1/1-1/1-1.4/1-1.4.1/1-1.4.1.2/1-1.4.1.2:1.2/0003:4C4A:4155.000F/input/input35
[  563.291505] hid-generic 0003:4C4A:4155.000F: input,hidraw2: USB HID v2.01 Keyboard [SmartlinkTechnology USB Composite Device] on usb-0000:04:00.3-1.4.1.2/input2
[  563.291557] usbhid 1-1.4.1.2:1.3: couldn't find an input interrupt endpoint
[  568.506654] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[  573.626656] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[  578.746657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[  583.866655] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)
[  588.986657] usb 1-1.4.1.2: 1:1: usb_set_interface failed (-110)

Ignore HID interface. The device is working properly.

Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---

**YES**

This commit should be backported to stable kernel trees. Here's my
extensive analysis:

1. **The commit fixes a real user-visible bug**: The device causes
   repeated USB interface timeout errors (`usb_set_interface failed
   (-110)`) that spam the kernel log and potentially interfere with
   device operation. The error log shows five consecutive timeout
   failures over 25 seconds, which would significantly impact user
   experience.

2. **The fix is minimal and contained**: The code changes are extremely
   simple - just adding two lines to define the vendor/device ID in
   `hid-ids.h` and one line to add it to the `hid_ignore_list[]` array
   in `hid-quirks.c`. This is the standard pattern for HID quirks.

3. **Similar commits were backported**: This is very similar to "Similar
   Commit #1" (Logitech GROUP) which also dealt with HID interfaces on
   audio devices causing problems. That commit added `HID_QUIRK_NOGET`
   and was backported. The pattern is identical - an audio device with a
   problematic HID interface that needs to be handled via quirks.

4. **No risk of regression**: The change only affects devices with
   vendor ID 0x4c4a and product ID 0x4155. When a device matches this
   ID, the HID subsystem will simply skip it via the `hid_ignore()`
   function check in `hid_add_device()`. This cannot affect any other
   devices.

5. **The device functions properly with the fix**: The commit message
   explicitly states "The device is working properly" - meaning the
   audio functionality works fine once the HID interface is ignored.
   This is not breaking functionality but rather preventing the HID
   subsystem from interfering with a working audio device.

6. **The error pattern indicates a hardware quirk**: The continuous
   timeout errors (-110) when trying to set the USB interface suggests
   the device's HID implementation doesn't properly respond to standard
   HID commands. This is exactly the type of hardware-specific issue
   that the HID quirks system was designed to handle.

This meets all the criteria for stable backporting: it fixes a bug
affecting users, is small and self-contained, has minimal risk, and
follows established patterns for similar fixes that were previously
backported.

 drivers/hid/hid-ids.h    | 3 +++
 drivers/hid/hid-quirks.c | 1 +
 2 files changed, 4 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 4b8f8e0ce8ca2..981ff6b233a40 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -1360,4 +1360,7 @@
 #define USB_VENDOR_ID_SIGNOTEC			0x2133
 #define USB_DEVICE_ID_SIGNOTEC_VIEWSONIC_PD1011	0x0018
 
+#define USB_VENDOR_ID_SMARTLINKTECHNOLOGY              0x4c4a
+#define USB_DEVICE_ID_SMARTLINKTECHNOLOGY_4155         0x4155
+
 #endif
diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index b3e7ede8f398e..423d18a77b9e8 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -873,6 +873,7 @@ static const struct hid_device_id hid_ignore_list[] = {
 #endif
 	{ HID_USB_DEVICE(USB_VENDOR_ID_YEALINK, USB_DEVICE_ID_YEALINK_P1K_P4K_B2K) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_HP_5MP_CAMERA_5473) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_SMARTLINKTECHNOLOGY, USB_DEVICE_ID_SMARTLINKTECHNOLOGY_4155) },
 	{ }
 };
 
-- 
2.39.5

[PATCH AUTOSEL 5.10 6/6] HID: quirks: Add quirk for 2 Chicony Electronics HP 5MP Cameras

[Sasha Levin]

From: "Chia-Lin Kao (AceLan)" <acelan.kao@canonical.com>

[ Upstream commit 54bae4c17c11688339eb73a04fd24203bb6e7494 ]

The Chicony Electronics HP 5MP Cameras (USB ID 04F2:B824 & 04F2:B82C)
report a HID sensor interface that is not actually implemented.
Attempting to access this non-functional sensor via iio_info causes
system hangs as runtime PM tries to wake up an unresponsive sensor.

Add these 2 devices to the HID ignore list since the sensor interface is
non-functional by design and should not be exposed to userspace.

Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---

**YES**

This commit should be backported to stable kernel trees. Here's my
extensive analysis:

## Key Characteristics of This Commit:

1. **Fixes a Critical User-Facing Bug**: The commit addresses system
   hangs that occur when userspace attempts to access non-functional HID
   sensor interfaces through iio_info. This is a serious usability issue
   that can make the system unresponsive.

2. **Minimal and Contained Changes**: The patch only adds two device IDs
   to existing infrastructure:
   - In `drivers/hid/hid-ids.h`: Added
     `USB_DEVICE_ID_CHICONY_HP_5MP_CAMERA` (0xb824) and
     `USB_DEVICE_ID_CHICONY_HP_5MP_CAMERA2` (0xb82c)
   - In `drivers/hid/hid-quirks.c`: Added these two devices to the
     `hid_ignore_list[]` array

3. **Zero Risk of Regression**: The changes only affect the specific USB
   devices (04F2:B824 and 04F2:B82C). No existing functionality is
   modified, and no code logic is changed.

## Comparison with Similar Commits:

This commit is nearly identical to **Similar Commit #1** (which was
backported), where a QUANTA HP 5MP Camera (0408:5473) was added to the
ignore list for the exact same reason - non-functional sensor causing
system hangs. Both commits:
- Target HP 5MP cameras with non-functional sensors
- Use the same fix approach (adding to HID ignore list)
- Prevent system hangs when accessing the sensor

## Alignment with Stable Kernel Rules:

The commit perfectly aligns with stable tree criteria:
- **Fixes a real bug**: System hangs are critical issues
- **Already in Linus' tree**: Signed-off by Jiri Kosina (HID maintainer)
- **Small change**: Only 4 lines of actual code changes
- **Obviously correct**: Simply adding device IDs to an ignore list
- **No new features**: Pure bugfix
- **Hardware-specific**: Only affects users with these specific cameras

## Historical Precedent:

Looking at the provided similar commits:
- 4 out of 5 hardware quirk commits were backported (80% backport rate)
- All commits fixing system hangs or device disconnections were
  backported
- The only non-backported commit (#4) involved architectural changes to
  enum handling

This commit follows the exact pattern of successfully backported
hardware quirks, making it an excellent candidate for stable inclusion.

 drivers/hid/hid-ids.h    | 2 ++
 drivers/hid/hid-quirks.c | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 981ff6b233a40..8bfa90e37ea17 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -278,6 +278,8 @@
 #define USB_DEVICE_ID_ASUS_AK1D		0x1125
 #define USB_DEVICE_ID_CHICONY_TOSHIBA_WT10A	0x1408
 #define USB_DEVICE_ID_CHICONY_ACER_SWITCH12	0x1421
+#define USB_DEVICE_ID_CHICONY_HP_5MP_CAMERA	0xb824
+#define USB_DEVICE_ID_CHICONY_HP_5MP_CAMERA2	0xb82c
 
 #define USB_VENDOR_ID_CHUNGHWAT		0x2247
 #define USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH	0x0001
diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index 423d18a77b9e8..9c1c65612adb7 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -726,6 +726,8 @@ static const struct hid_device_id hid_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AVERMEDIA, USB_DEVICE_ID_AVER_FM_MR800) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_AXENTIA, USB_DEVICE_ID_AXENTIA_FM_RADIO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_HP_5MP_CAMERA) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_HP_5MP_CAMERA2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI470X) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI4713) },
-- 
2.39.5