From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: James Calligeros <jcalligeros99@gmail.com>
Cc: Sven Peter <sven@kernel.org>, Janne Grunau <j@jannau.net>,
Alyssa Rosenzweig <alyssa@rosenzweig.io>,
Neal Gompa <neal@gompa.dev>, Lee Jones <lee@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
asahi@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-rtc@vger.kernel.org, linux-hwmon@vger.kernel.org,
linux-input@vger.kernel.org, Mark Kettenis <kettenis@openbsd.org>,
Hector Martin <marcan@marcan.st>
Subject: Re: [PATCH v2 00/11] mfd: macsmc: add rtc, hwmon and hid subdevices
Date: Fri, 29 Aug 2025 00:12:13 +0200 [thread overview]
Message-ID: <202508282212139a74f113@mail.local> (raw)
In-Reply-To: <20250827-macsmc-subdevs-v2-0-ce5e99d54c28@gmail.com>
Hello,
On 27/08/2025 21:22:34+1000, James Calligeros wrote:
> Hi all,
>
> This series adds support for the remaining SMC subdevices. These are the
> RTC, hwmon, and HID devices. They are being submitted together as the RTC
> and hwmon drivers both require changes to the SMC DT schema.
>
How do you expect this to be merged? From what I get, I could just take
1 and 3 as there doesn't seem to be any actual dependencies on any of
the other patches and the MFD change doesn't depend on the RTC changes.
> The RTC driver is responsible for getting and setting the system clock,
> and requires an NVMEM cell. This series replaces Sven's original RTC driver
> submission [1].
>
> The hwmon function is an interesting one. While each Apple Silicon device
> exposes pretty similar sets of sensors, these all seem to be paired to
> different SMC keys in the firmware interface. This is true even when the
> sensors are on the SoC. For example, an M1 MacBook Pro will use different
> keys to access the LITTLE core temperature sensors to an M1 Mac mini. This
> necessitates describing which keys correspond to which sensors for each
> device individually, and populating the hwmon structs at runtime. We do
> this with a node in the device tree. This series includes only the keys
> for sensors which we know to be common to all devices. The SMC is also
> responsible for monitoring and controlling fan speeds on systems with fans,
> which we expose via the hwmon driver.
>
> The SMC also handles the hardware power button and lid switch. Power
> button presses and lid opening/closing are emitted as HID events, so we
> add a HID subdevice to handle them.
>
> Note that this series is based on a branch with three additional commits
> applied to add the parent SMC nodes to the relevant Devicetrees. This
> was done to silence build errors. The series applies cleanly to 6.17-rc1.
>
> Regards,
>
> James
>
> [1] https://lore.kernel.org/asahi/CAEg-Je84XxLWH7vznQmPRfjf6GxWOu75ZetwN7AdseAwfMLLrQ@mail.gmail.com/T/#t
>
> Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
> ---
> Changes in v2:
> - Added Rob's R-b tag to RTC DT binding
> - Removed redundant nesting from hwmon DT binding
> - Dedpulicated property definitions in hwmon DT schema
> - Made label a required property for hwmon DT nodes
> - Clarified semantics in hwmon DT schema definitions
> - Split mfd tree changes into separate commits
> - Fixed numerous style errors in hwmon driver
> - Addressed Guenter's initial feedback on the hwmon driver
> - Modified hwmon driver to reflect DT schema changes
> - Added compatible property to hwmon node
> - Link to v1: https://lore.kernel.org/r/20250819-macsmc-subdevs-v1-0-57df6c3e5f19@gmail.com
>
> ---
> Hector Martin (2):
> rtc: Add new rtc-macsmc driver for Apple Silicon Macs
> input: macsmc-hid: New driver to handle the Apple Mac SMC buttons/lid
>
> James Calligeros (7):
> dt-bindings: hwmon: Add Apple System Management Controller hwmon schema
> mfd: macsmc: Wire up Apple SMC RTC subdevice
> hwmon: Add Apple Silicon SMC hwmon driver
> mfd: macsmc: Wire up Apple SMC hwmon subdevice
> mfd: macsmc: Wire up Apple SMC HID subdevice
> arm64: dts: apple: Add common hwmon sensors and fans
> arm64: dts: apple: t8103, t600x, t8112: Add common hwmon nodes to devices
>
> Sven Peter (2):
> dt-bindings: rtc: Add Apple SMC RTC
> arm64: dts: apple: t8103,t600x,t8112: Add SMC RTC node
>
> .../bindings/hwmon/apple,smc-hwmon.yaml | 132 ++++
> .../bindings/mfd/apple,smc.yaml | 45 ++
> .../bindings/rtc/apple,smc-rtc.yaml | 35 +
> MAINTAINERS | 5 +
> .../boot/dts/apple/hwmon-common.dtsi | 37 ++
> .../boot/dts/apple/hwmon-fan-dual.dtsi | 24 +
> arch/arm64/boot/dts/apple/hwmon-fan.dtsi | 19 +
> .../boot/dts/apple/hwmon-laptop.dtsi | 35 +
> .../boot/dts/apple/hwmon-mac-mini.dtsi | 17 +
> .../arm64/boot/dts/apple/t6001-j375c.dts | 2 +
> .../arm64/boot/dts/apple/t6002-j375d.dts | 2 +
> .../arm64/boot/dts/apple/t600x-die0.dtsi | 6 +
> .../boot/dts/apple/t600x-j314-j316.dtsi | 4 +
> .../arm64/boot/dts/apple/t600x-j375.dtsi | 2 +
> arch/arm64/boot/dts/apple/t8103-j274.dts | 2 +
> arch/arm64/boot/dts/apple/t8103-j293.dts | 3 +
> arch/arm64/boot/dts/apple/t8103-j313.dts | 2 +
> arch/arm64/boot/dts/apple/t8103-j456.dts | 2 +
> arch/arm64/boot/dts/apple/t8103-j457.dts | 2 +
> .../arm64/boot/dts/apple/t8103-jxxx.dtsi | 2 +
> arch/arm64/boot/dts/apple/t8103.dtsi | 6 +
> arch/arm64/boot/dts/apple/t8112-j413.dts | 2 +
> arch/arm64/boot/dts/apple/t8112-j473.dts | 2 +
> arch/arm64/boot/dts/apple/t8112-j493.dts | 3 +
> .../arm64/boot/dts/apple/t8112-jxxx.dtsi | 2 +
> arch/arm64/boot/dts/apple/t8112.dtsi | 6 +
> drivers/hwmon/Kconfig | 12 +
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/macsmc_hwmon.c | 848 +++++++++++++++++++++++++
> drivers/input/misc/Kconfig | 11 +
> drivers/input/misc/Makefile | 1 +
> drivers/input/misc/macsmc-hid.c | 209 ++++++
> drivers/mfd/macsmc.c | 3 +
> drivers/rtc/Kconfig | 11 +
> drivers/rtc/Makefile | 1 +
> drivers/rtc/rtc-macsmc.c | 141 ++++
> 36 files changed, 1637 insertions(+)
> ---
> base-commit: 876d6a70b24869f96ebc8672caf86cb4bae72927
> change-id: 20250816-macsmc-subdevs-87032c017d0c
>
> Best regards,
> --
> James Calligeros <jcalligeros99@gmail.com>
>
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
prev parent reply other threads:[~2025-08-28 22:12 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-27 11:22 [PATCH v2 00/11] mfd: macsmc: add rtc, hwmon and hid subdevices James Calligeros
2025-08-27 11:22 ` [PATCH v2 01/11] dt-bindings: rtc: Add Apple SMC RTC James Calligeros
2025-08-27 11:22 ` [PATCH v2 02/11] dt-bindings: hwmon: Add Apple System Management Controller hwmon schema James Calligeros
2025-08-29 16:40 ` Rob Herring
2025-08-27 11:22 ` [PATCH v2 03/11] rtc: Add new rtc-macsmc driver for Apple Silicon Macs James Calligeros
2025-08-27 11:22 ` [PATCH v2 04/11] mfd: macsmc: Wire up Apple SMC RTC subdevice James Calligeros
2025-08-27 11:22 ` [PATCH v2 05/11] hwmon: Add Apple Silicon SMC hwmon driver James Calligeros
2025-08-28 22:19 ` Guenter Roeck
2025-08-27 11:22 ` [PATCH v2 06/11] mfd: macsmc: Wire up Apple SMC hwmon subdevice James Calligeros
2025-08-27 11:22 ` [PATCH v2 07/11] input: macsmc-hid: New driver to handle the Apple Mac SMC buttons/lid James Calligeros
2025-08-29 11:11 ` Dmitry Torokhov
2025-08-27 11:22 ` [PATCH v2 08/11] mfd: macsmc: Wire up Apple SMC HID subdevice James Calligeros
2025-08-27 11:22 ` [PATCH v2 09/11] arm64: dts: apple: t8103,t600x,t8112: Add SMC RTC node James Calligeros
2025-08-27 11:22 ` [PATCH v2 10/11] arm64: dts: apple: Add common hwmon sensors and fans James Calligeros
2025-08-27 11:22 ` [PATCH v2 11/11] arm64: dts: apple: t8103, t600x, t8112: Add common hwmon nodes to devices James Calligeros
2025-08-27 13:47 ` [PATCH v2 00/11] mfd: macsmc: add rtc, hwmon and hid subdevices Guenter Roeck
2025-08-27 22:06 ` James Calligeros
2025-08-28 2:50 ` Neal Gompa
2025-08-28 22:12 ` Alexandre Belloni [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202508282212139a74f113@mail.local \
--to=alexandre.belloni@bootlin.com \
--cc=alyssa@rosenzweig.io \
--cc=asahi@lists.linux.dev \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=j@jannau.net \
--cc=jcalligeros99@gmail.com \
--cc=jdelvare@suse.com \
--cc=kettenis@openbsd.org \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=marcan@marcan.st \
--cc=neal@gompa.dev \
--cc=robh@kernel.org \
--cc=sven@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).