Linux Input/HID development
 help / color / mirror / Atom feed
From: Alexander Kurz <akurz@blala.de>
To: "Lee Jones" <lee@kernel.org>, "Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Dmitry Torokhov" <dmitry.torokhov@gmail.com>,
	"Dzmitry Sankouski" <dsankouski@gmail.com>,
	"Dr. David Alan Gilbert" <linux@treblig.org>,
	"Heiko Stuebner" <heiko@sntech.de>,
	"Uwe Kleine-König" <u.kleine-koenig@baylibre.com>,
	devicetree@vger.kernel.org, linux-input@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Alexander Kurz <akurz@blala.de>
Subject: [PATCH v3 4/7] Input: mc13783-pwrbutton: enable other mc13xxx PMIC
Date: Fri, 29 Aug 2025 20:15:14 +0000	[thread overview]
Message-ID: <20250829201517.15374-5-akurz@blala.de> (raw)
In-Reply-To: <20250829201517.15374-1-akurz@blala.de>

All three mc13xxx types do feature two common power buttons referred as
ONOFD[12] (mc13783) and PWRON[12] (mc13892/mc34708) in the SoC reference
manuals. Add support for PWRON[12] (mc13892/mc34708) but skip support for
button PWRON3 (mc13892) for sake of simplicity.

Signed-off-by: Alexander Kurz <akurz@blala.de>
---
 drivers/input/misc/Kconfig             |  4 +--
 drivers/input/misc/mc13783-pwrbutton.c | 44 +++++++++++++++++++++++---
 include/linux/mfd/mc13783.h            |  4 +--
 include/linux/mfd/mc13xxx.h            |  2 ++
 4 files changed, 46 insertions(+), 8 deletions(-)

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 0fb21c99a5e3..b66e920369f2 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -276,8 +276,8 @@ config INPUT_MC13783_PWRBUTTON
 	tristate "MC13783 ON buttons"
 	depends on MFD_MC13XXX
 	help
-	  Support the ON buttons of MC13783 PMIC as an input device
-	  reporting power button status.
+	  Support the ON buttons of MC13783/MC13892/MC34708 PMIC as an input
+	  device reporting power button status.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called mc13783-pwrbutton.
diff --git a/drivers/input/misc/mc13783-pwrbutton.c b/drivers/input/misc/mc13783-pwrbutton.c
index ace9f286fd24..c9eea57ceedd 100644
--- a/drivers/input/misc/mc13783-pwrbutton.c
+++ b/drivers/input/misc/mc13783-pwrbutton.c
@@ -30,16 +30,21 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 
+struct mc13xxx_button_devtype {
+	int button_id_max;
+};
+
 struct mc13783_pwrb {
 	struct input_dev *pwr;
 	struct mc13xxx *mc13783;
-#define MC13783_PWRB_B1_POL_INVERT	(1 << 0)
-#define MC13783_PWRB_B2_POL_INVERT	(1 << 1)
-#define MC13783_PWRB_B3_POL_INVERT	(1 << 2)
 	int flags;
 	unsigned short keymap[3];
 };
 
+#define MC13783_PWRB_B1_POL_INVERT	(1 << 0)
+#define MC13783_PWRB_B2_POL_INVERT	(1 << 1)
+#define MC13783_PWRB_B3_POL_INVERT	(1 << 2)
+
 #define MC13783_REG_INTERRUPT_SENSE_1		5
 #define MC13783_IRQSENSE1_ONOFD1S		(1 << 3)
 #define MC13783_IRQSENSE1_ONOFD2S		(1 << 4)
@@ -108,6 +113,8 @@ static int mc13783_pwrbutton_probe(struct platform_device *pdev)
 {
 	const struct mc13xxx_buttons_platform_data *pdata;
 	struct mc13xxx *mc13783 = dev_get_drvdata(pdev->dev.parent);
+	struct mc13xxx_button_devtype *devtype =
+		(struct mc13xxx_button_devtype *)pdev->id_entry->driver_data;
 	struct input_dev *pwr;
 	struct mc13783_pwrb *priv;
 	int err = 0;
@@ -127,6 +134,11 @@ static int mc13783_pwrbutton_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;
 
+	if (devtype->button_id_max < 2 && pdata->b_on_flags[2] & 0x3) {
+		dev_err(&pdev->dev, "button not supported\n");
+		return -ENODEV;
+	}
+
 	reg |= (pdata->b_on_flags[0] & 0x3) << MC13783_POWER_CONTROL_2_ON1BDBNC;
 	reg |= (pdata->b_on_flags[1] & 0x3) << MC13783_POWER_CONTROL_2_ON2BDBNC;
 	reg |= (pdata->b_on_flags[2] & 0x3) << MC13783_POWER_CONTROL_2_ON3BDBNC;
@@ -239,12 +251,15 @@ static void mc13783_pwrbutton_remove(struct platform_device *pdev)
 {
 	struct mc13783_pwrb *priv = platform_get_drvdata(pdev);
 	const struct mc13xxx_buttons_platform_data *pdata;
+	struct mc13xxx_button_devtype *devtype =
+		(struct mc13xxx_button_devtype *)pdev->id_entry->driver_data;
 
 	pdata = dev_get_platdata(&pdev->dev);
 
 	mc13xxx_lock(priv->mc13783);
 
-	if (pdata->b_on_flags[2] & MC13783_BUTTON_ENABLE)
+	if (devtype->button_id_max >= 2 &&
+		pdata->b_on_flags[2] & MC13783_BUTTON_ENABLE)
 		mc13xxx_irq_free(priv->mc13783, MC13783_IRQ_ONOFD3, priv);
 	if (pdata->b_on_flags[1] & MC13783_BUTTON_ENABLE)
 		mc13xxx_irq_free(priv->mc13783, MC13783_IRQ_ONOFD2, priv);
@@ -254,7 +269,28 @@ static void mc13783_pwrbutton_remove(struct platform_device *pdev)
 	mc13xxx_unlock(priv->mc13783);
 }
 
+static const struct mc13xxx_button_devtype mc13783_button_devtype = {
+	.button_id_max	= 2,
+};
+
+static const struct mc13xxx_button_devtype mc13892_button_devtype = {
+	/* PWRON3 is not supported yet. */
+	.button_id_max	= 1,
+};
+
+static const struct mc13xxx_button_devtype mc34708_button_devtype = {
+	.button_id_max	= 1,
+};
+
+static const struct platform_device_id mc13xxx_pwrbutton_idtable[] = {
+	{ "mc13783-pwrbutton", (kernel_ulong_t)&mc13783_button_devtype },
+	{ "mc13892-pwrbutton", (kernel_ulong_t)&mc13892_button_devtype },
+	{ "mc34708-pwrbutton", (kernel_ulong_t)&mc34708_button_devtype },
+	{ /* sentinel */ }
+};
+
 static struct platform_driver mc13783_pwrbutton_driver = {
+	.id_table	= mc13xxx_pwrbutton_idtable,
 	.probe		= mc13783_pwrbutton_probe,
 	.remove		= mc13783_pwrbutton_remove,
 	.driver		= {
diff --git a/include/linux/mfd/mc13783.h b/include/linux/mfd/mc13783.h
index c25b1676741b..ab6db774e1fa 100644
--- a/include/linux/mfd/mc13783.h
+++ b/include/linux/mfd/mc13783.h
@@ -65,8 +65,8 @@
 #define MC13783_IRQ_UDM		23
 #define MC13783_IRQ_1HZ		MC13XXX_IRQ_1HZ
 #define MC13783_IRQ_TODA	MC13XXX_IRQ_TODA
-#define MC13783_IRQ_ONOFD1	27
-#define MC13783_IRQ_ONOFD2	28
+#define MC13783_IRQ_ONOFD1	MC13XXX_IRQ_PWRON1
+#define MC13783_IRQ_ONOFD2	MC13XXX_IRQ_PWRON2
 #define MC13783_IRQ_ONOFD3	29
 #define MC13783_IRQ_SYSRST	MC13XXX_IRQ_SYSRST
 #define MC13783_IRQ_RTCRST	MC13XXX_IRQ_RTCRST
diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h
index 0393083af28a..36e5e7de7cb2 100644
--- a/include/linux/mfd/mc13xxx.h
+++ b/include/linux/mfd/mc13xxx.h
@@ -67,6 +67,8 @@ int mc13xxx_irq_unmask(struct mc13xxx *mc13xxx, int irq);
 #define MC13XXX_IRQ_LOBATH	14
 #define MC13XXX_IRQ_1HZ		24
 #define MC13XXX_IRQ_TODA	25
+#define MC13XXX_IRQ_PWRON1	27
+#define MC13XXX_IRQ_PWRON2	28
 #define MC13XXX_IRQ_SYSRST	30
 #define MC13XXX_IRQ_RTCRST	31
 #define MC13XXX_IRQ_PC		32
-- 
2.39.5


  parent reply	other threads:[~2025-08-29 20:10 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-08-29 20:15 [PATCH v3 0/7] Fix, extend and support OF to mc13xxx pwrbutton Alexander Kurz
2025-08-29 20:15 ` [PATCH v3 1/7] Input: mc13783-pwrbutton: fix irq mixup Alexander Kurz
2025-09-04 14:10   ` Dmitry Torokhov
2025-08-29 20:15 ` [PATCH v3 2/7] Input: mc13783-pwrbutton: use managed resources Alexander Kurz
2025-09-04 14:12   ` Dmitry Torokhov
2025-08-29 20:15 ` [PATCH v3 3/7] Input: mc13783-pwrbutton: convert pdata members to array Alexander Kurz
2025-09-03 13:35   ` Lee Jones
2025-08-29 20:15 ` Alexander Kurz [this message]
2025-09-03 13:35   ` [PATCH v3 4/7] Input: mc13783-pwrbutton: enable other mc13xxx PMIC Lee Jones
2025-08-29 20:15 ` [PATCH v3 5/7] dt-bindings: mfd: fsl,mc13xxx: convert txt to DT schema Alexander Kurz
2025-09-02 20:48   ` Rob Herring (Arm)
2025-08-29 20:15 ` [PATCH v3 6/7] dt-bindings: mfd: fsl,mc13xxx: add buttons node Alexander Kurz
2025-09-02 20:49   ` Rob Herring (Arm)
2025-08-29 20:15 ` [PATCH v3 7/7] Input: mc13783-pwrbutton: add OF support Alexander Kurz
2025-09-04 14:16   ` Dmitry Torokhov
2025-09-03 13:37 ` (subset) [PATCH v3 0/7] Fix, extend and support OF to mc13xxx pwrbutton Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250829201517.15374-5-akurz@blala.de \
    --to=akurz@blala.de \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=dsankouski@gmail.com \
    --cc=heiko@sntech.de \
    --cc=krzk+dt@kernel.org \
    --cc=lee@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@treblig.org \
    --cc=robh@kernel.org \
    --cc=u.kleine-koenig@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox