From: Benjamin Tissoires <bentiss@kernel.org>
To: Jiri Kosina <jikos@kernel.org>, Shuah Khan <shuah@kernel.org>
Cc: Peter Hutterer <peter.hutterer@who-t.net>,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-kselftest@vger.kernel.org,
Benjamin Tissoires <bentiss@kernel.org>
Subject: [PATCH 2/2] selftests/hid: add tests for missing release on the Dell Synaptics
Date: Wed, 08 Oct 2025 16:06:59 +0200 [thread overview]
Message-ID: <20251008-fix-sticky-fingers-v1-2-760f1f26fce3@kernel.org> (raw)
In-Reply-To: <20251008-fix-sticky-fingers-v1-0-760f1f26fce3@kernel.org>
Add a simple test for the corner case not currently covered by the
sticky fingers quirk. Because it's a corner case test, we only test this
on a couple of devices, not on all of them because the value of adding
the same test over and over is rather moot.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
---
.../testing/selftests/hid/tests/test_multitouch.py | 55 ++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/tools/testing/selftests/hid/tests/test_multitouch.py b/tools/testing/selftests/hid/tests/test_multitouch.py
index 5d2ffa3d59777e3cd93d1d7aebabc2a6b7ecb42a..ece0ba8e7d34b75d42245e5936ecf804c46b0846 100644
--- a/tools/testing/selftests/hid/tests/test_multitouch.py
+++ b/tools/testing/selftests/hid/tests/test_multitouch.py
@@ -1752,6 +1752,52 @@ class TestWin8TSConfidence(BaseTest.TestWin8Multitouch):
assert evdev.slots[0][libevdev.EV_ABS.ABS_MT_TRACKING_ID] == -1
+ @pytest.mark.skip_if_uhdev(
+ lambda uhdev: "Confidence" not in uhdev.fields,
+ "Device not compatible, missing Confidence usage",
+ )
+ def test_mt_confidence_bad_multi_release(self):
+ """Check for the sticky finger being properly detected.
+
+ We first inject 3 fingers, then release only the second.
+ After 100 ms, we should receive a generated event about the
+ 2 missing fingers being released.
+ """
+ uhdev = self.uhdev
+ evdev = uhdev.get_evdev()
+
+ # send 3 touches
+ t0 = Touch(1, 50, 10)
+ t1 = Touch(2, 150, 100)
+ t2 = Touch(3, 250, 200)
+ r = uhdev.event([t0, t1, t2])
+ events = uhdev.next_sync_events()
+ self.debug_reports(r, uhdev, events)
+
+ # release the second
+ t1.tipswitch = False
+ r = uhdev.event([t1])
+ events = uhdev.next_sync_events()
+ self.debug_reports(r, uhdev, events)
+
+ # only the second is released
+ assert evdev.slots[0][libevdev.EV_ABS.ABS_MT_TRACKING_ID] != -1
+ assert evdev.slots[1][libevdev.EV_ABS.ABS_MT_TRACKING_ID] == -1
+ assert evdev.slots[2][libevdev.EV_ABS.ABS_MT_TRACKING_ID] != -1
+
+ # wait for the timer to kick in
+ time.sleep(0.2)
+
+ events = uhdev.next_sync_events()
+ self.debug_reports([], uhdev, events)
+
+ # now all 3 fingers are released
+ assert libevdev.InputEvent(libevdev.EV_KEY.BTN_TOUCH, 0) in events
+ assert evdev.slots[0][libevdev.EV_ABS.ABS_MT_TRACKING_ID] == -1
+ assert evdev.slots[1][libevdev.EV_ABS.ABS_MT_TRACKING_ID] == -1
+ assert evdev.slots[2][libevdev.EV_ABS.ABS_MT_TRACKING_ID] == -1
+
+
class TestElanXPS9360(BaseTest.TestWin8Multitouch):
def create_device(self):
return Digitizer(
@@ -2086,3 +2132,12 @@ class Testsynaptics_06cb_ce08(BaseTest.TestPTP):
input_info=(BusType.I2C, 0x06CB, 0xCE08),
rdesc="05 01 09 02 a1 01 85 02 09 01 a1 00 05 09 19 01 29 02 15 00 25 01 75 01 95 02 81 02 95 06 81 01 05 01 09 30 09 31 15 81 25 7f 75 08 95 02 81 06 c0 c0 05 01 09 02 a1 01 85 18 09 01 a1 00 05 09 19 01 29 03 46 00 00 15 00 25 01 75 01 95 03 81 02 95 05 81 01 05 01 09 30 09 31 15 81 25 7f 75 08 95 02 81 06 c0 c0 06 00 ff 09 02 a1 01 85 20 09 01 a1 00 09 03 15 00 26 ff 00 35 00 46 ff 00 75 08 95 05 81 02 c0 c0 05 0d 09 05 a1 01 85 03 05 0d 09 22 a1 02 15 00 25 01 09 47 09 42 95 02 75 01 81 02 95 01 75 03 25 05 09 51 81 02 75 01 95 03 81 03 05 01 15 00 26 f8 04 75 10 55 0e 65 11 09 30 35 00 46 24 04 95 01 81 02 46 30 02 26 a0 02 09 31 81 02 c0 05 0d 09 22 a1 02 15 00 25 01 09 47 09 42 95 02 75 01 81 02 95 01 75 03 25 05 09 51 81 02 75 01 95 03 81 03 05 01 15 00 26 f8 04 75 10 55 0e 65 11 09 30 35 00 46 24 04 95 01 81 02 46 30 02 26 a0 02 09 31 81 02 c0 05 0d 09 22 a1 02 15 00 25 01 09 47 09 42 95 02 75 01 81 02 95 01 75 03 25 05 09 51 81 02 75 01 95 03 81 03 05 01 15 00 26 f8 04 75 10 55 0e 65 11 09 30 35 00 46 24 04 95 01 81 02 46 30 02 26 a0 02 09 31 81 02 c0 05 0d 09 22 a1 02 15 00 25 01 09 47 09 42 95 02 75 01 81 02 95 01 75 03 25 05 09 51 81 02 75 01 95 03 81 03 05 01 15 00 26 f8 04 75 10 55 0e 65 11 09 30 35 00 46 24 04 95 01 81 02 46 30 02 26 a0 02 09 31 81 02 c0 05 0d 09 22 a1 02 15 00 25 01 09 47 09 42 95 02 75 01 81 02 95 01 75 03 25 05 09 51 81 02 75 01 95 03 81 03 05 01 15 00 26 f8 04 75 10 55 0e 65 11 09 30 35 00 46 24 04 95 01 81 02 46 30 02 26 a0 02 09 31 81 02 c0 05 0d 55 0c 66 01 10 47 ff ff 00 00 27 ff ff 00 00 75 10 95 01 09 56 81 02 09 54 25 7f 95 01 75 08 81 02 05 09 09 01 25 01 75 01 95 01 81 02 95 07 81 03 05 0d 85 08 09 55 09 59 75 04 95 02 25 0f b1 02 85 0d 09 60 75 01 95 01 15 00 25 01 b1 02 95 07 b1 03 85 07 06 00 ff 09 c5 15 00 26 ff 00 75 08 96 00 01 b1 02 c0 05 0d 09 0e a1 01 85 04 09 22 a1 02 09 52 15 00 25 0a 75 08 95 01 b1 02 c0 09 22 a1 00 85 06 09 57 09 58 75 01 95 02 25 01 b1 02 95 06 b1 03 c0 c0 06 00 ff 09 01 a1 01 85 09 09 02 15 00 26 ff 00 75 08 95 14 91 02 85 0a 09 03 15 00 26 ff 00 75 08 95 14 91 02 85 0b 09 04 15 00 26 ff 00 75 08 95 45 81 02 85 0c 09 05 15 00 26 ff 00 75 08 95 45 81 02 85 0f 09 06 15 00 26 ff 00 75 08 95 03 b1 02 85 0e 09 07 15 00 26 ff 00 75 08 95 01 b1 02 c0",
)
+
+class Testsynaptics_06cb_ce26(TestWin8TSConfidence):
+ def create_device(self):
+ return PTP(
+ "uhid test synaptics_06cb_ce26",
+ max_contacts=5,
+ input_info=(BusType.I2C, 0x06CB, 0xCE26),
+ rdesc="05 01 09 02 a1 01 85 02 09 01 a1 00 05 09 19 01 29 02 15 00 25 01 75 01 95 02 81 02 95 06 81 01 05 01 09 30 09 31 15 81 25 7f 75 08 95 02 81 06 c0 c0 05 0d 09 05 a1 01 85 03 05 0d 09 22 a1 02 15 00 25 01 09 47 09 42 95 02 75 01 81 02 95 01 75 03 25 05 09 51 81 02 75 01 95 03 81 03 05 01 15 00 26 45 05 75 10 55 0e 65 11 09 30 35 00 46 64 04 95 01 81 02 46 a2 02 26 29 03 09 31 81 02 c0 05 0d 09 22 a1 02 15 00 25 01 09 47 09 42 95 02 75 01 81 02 95 01 75 03 25 05 09 51 81 02 75 01 95 03 81 03 05 01 15 00 26 45 05 75 10 55 0e 65 11 09 30 35 00 46 64 04 95 01 81 02 46 a2 02 26 29 03 09 31 81 02 c0 05 0d 09 22 a1 02 15 00 25 01 09 47 09 42 95 02 75 01 81 02 95 01 75 03 25 05 09 51 81 02 75 01 95 03 81 03 05 01 15 00 26 45 05 75 10 55 0e 65 11 09 30 35 00 46 64 04 95 01 81 02 46 a2 02 26 29 03 09 31 81 02 c0 05 0d 09 22 a1 02 15 00 25 01 09 47 09 42 95 02 75 01 81 02 95 01 75 03 25 05 09 51 81 02 75 01 95 03 81 03 05 01 15 00 26 45 05 75 10 55 0e 65 11 09 30 35 00 46 64 04 95 01 81 02 46 a2 02 26 29 03 09 31 81 02 c0 05 0d 09 22 a1 02 15 00 25 01 09 47 09 42 95 02 75 01 81 02 95 01 75 03 25 05 09 51 81 02 75 01 95 03 81 03 05 01 15 00 26 45 05 75 10 55 0e 65 11 09 30 35 00 46 64 04 95 01 81 02 46 a2 02 26 29 03 09 31 81 02 c0 05 0d 55 0c 66 01 10 47 ff ff 00 00 27 ff ff 00 00 75 10 95 01 09 56 81 02 09 54 25 7f 95 01 75 08 81 02 05 09 09 01 25 01 75 01 95 01 81 02 95 07 81 03 05 0d 85 08 09 55 09 59 75 04 95 02 25 0f b1 02 85 0d 09 60 75 01 95 01 15 00 25 01 b1 02 95 07 b1 03 85 07 06 00 ff 09 c5 15 00 26 ff 00 75 08 96 00 01 b1 02 c0 05 0d 09 0e a1 01 85 04 09 22 a1 02 09 52 15 00 25 0a 75 08 95 01 b1 02 c0 09 22 a1 00 85 06 09 57 09 58 75 01 95 02 25 01 b1 02 95 06 b1 03 c0 c0 06 00 ff 09 01 a1 01 85 09 09 02 15 00 26 ff 00 75 08 95 14 91 02 85 0a 09 03 15 00 26 ff 00 75 08 95 14 91 02 85 0b 09 04 15 00 26 ff 00 75 08 95 3d 81 02 85 0c 09 05 15 00 26 ff 00 75 08 95 3d 81 02 85 0f 09 06 15 00 26 ff 00 75 08 95 03 b1 02 85 0e 09 07 15 00 26 ff 00 75 08 95 01 b1 02 c0",
+ )
--
2.51.0
next prev parent reply other threads:[~2025-10-08 14:07 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-08 14:06 [PATCH 0/2] HID: multitouch: fix sticky-fingers quirks Benjamin Tissoires
2025-10-08 14:06 ` [PATCH 1/2] HID: multitouch: fix sticky fingers Benjamin Tissoires
2025-10-08 14:06 ` Benjamin Tissoires [this message]
2025-10-15 15:27 ` [PATCH 0/2] HID: multitouch: fix sticky-fingers quirks Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251008-fix-sticky-fingers-v1-2-760f1f26fce3@kernel.org \
--to=bentiss@kernel.org \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=peter.hutterer@who-t.net \
--cc=shuah@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).