[PATCH v2 04/11] Input: ilitek_ts_i2c: fix warning with gpio controllers that sleep

[Josua Mayer <josua@solid-run.com>]

The ilitek touchscreen driver uses the non-sleeping gpiod_set_value
function for reset.

When the connected gpio controller needs to sleep as is common for i2c
based expanders, this causes noisy complaints in kernel log.

Reset is not time-critical, switch to the gpiod_set_value_cansleep
variant.

Signed-off-by: Josua Mayer <josua@solid-run.com>
---
 drivers/input/touchscreen/ilitek_ts_i2c.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/input/touchscreen/ilitek_ts_i2c.c b/drivers/input/touchscreen/ilitek_ts_i2c.c
index 0dd632724a003..8c5a54b336816 100644
--- a/drivers/input/touchscreen/ilitek_ts_i2c.c
+++ b/drivers/input/touchscreen/ilitek_ts_i2c.c
@@ -396,9 +396,9 @@ static const struct ilitek_protocol_map ptl_func_map[] = {
 static void ilitek_reset(struct ilitek_ts_data *ts, int delay)
 {
 	if (ts->reset_gpio) {
-		gpiod_set_value(ts->reset_gpio, 1);
+		gpiod_set_value_cansleep(ts->reset_gpio, 1);
 		mdelay(10);
-		gpiod_set_value(ts->reset_gpio, 0);
+		gpiod_set_value_cansleep(ts->reset_gpio, 0);
 		mdelay(delay);
 	}
 }

-- 
2.51.0