[PATCH v12 2/3] HID: cp2112: Fwnode Support

[Danny Kaehn <danny.kaehn@plexus.com>]

Support describing the CP2112's I2C and GPIO interfaces in firmware.

Bindings between the firmware nodes and the functions of the device
are distinct between ACPI and DeviceTree.

For ACPI, the i2c_adapter will use the child with _ADR Zero and the
gpio_chip will use the child with _ADR One. For DeviceTree, the
i2c_adapter will use the child with name "i2c", but the gpio_chip
will share a firmware node with the CP2112.

Signed-off-by: Danny Kaehn <danny.kaehn@plexus.com>
---
 drivers/hid/hid-cp2112.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/hid/hid-cp2112.c b/drivers/hid/hid-cp2112.c
index 803b883ae875..fb301c27c712 100644
--- a/drivers/hid/hid-cp2112.c
+++ b/drivers/hid/hid-cp2112.c
@@ -29,6 +29,16 @@
 #include <linux/usb/ch9.h>
 #include "hid-ids.h"
 
+/**
+ * enum cp2112_child_acpi_cell_addrs - Child ACPI addresses for CP2112 sub-functions
+ * @CP2112_I2C_ADR: Address for I2C node
+ * @CP2112_GPIO_ADR: Address for GPIO node
+ */
+enum cp2112_child_acpi_cell_addrs {
+	CP2112_I2C_ADR = 0,
+	CP2112_GPIO_ADR = 1,
+};
+
 #define CP2112_REPORT_MAX_LENGTH		64
 #define CP2112_GPIO_CONFIG_LENGTH		5
 #define CP2112_GPIO_GET_LENGTH			2
@@ -1208,7 +1218,9 @@ static int cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	struct cp2112_device *dev;
 	u8 buf[3];
 	struct cp2112_smbus_config_report config;
+	struct fwnode_handle *child;
 	struct gpio_irq_chip *girq;
+	u32 addr;
 	int ret;
 
 	dev = devm_kzalloc(&hdev->dev, sizeof(*dev), GFP_KERNEL);
@@ -1226,6 +1238,26 @@ static int cp2112_probe(struct hid_device *hdev, const struct hid_device_id *id)
 		return ret;
 	}
 
+	if (is_acpi_device_node(hdev->dev.fwnode)) {
+		device_for_each_child_node(&hdev->dev, child) {
+			ret = acpi_get_local_address(ACPI_HANDLE_FWNODE(child), &addr);
+			if (ret)
+				continue;
+
+			switch (addr) {
+			case CP2112_I2C_ADR:
+				device_set_node(&dev->adap.dev, child);
+				break;
+			case CP2112_GPIO_ADR:
+				dev->gc.fwnode = child;
+				break;
+			}
+		}
+	} else {
+		device_set_node(&dev->adap.dev,
+			device_get_named_child_node(&hdev->dev, "i2c"));
+	}
+
 	ret = hid_parse(hdev);
 	if (ret) {
 		hid_err(hdev, "parse failed\n");

-- 
2.25.1