Re: [PATCH v4 1/3] dt-bindings: touchscreen: trivial-touch: Drop 'interrupts' requirement for old Ilitek

[Krzysztof Kozlowski <krzk@kernel.org>]

On Sat, Jan 17, 2026 at 01:12:02AM +0100, Marek Vasut wrote:
> The old Ilitek touch controllers V3 and V6 can operate without
> interrupt line, in polling mode. Drop the 'interrupts' property
> requirement for those four controllers. To avoid overloading the
> trivial-touch, fork the old Ilitek V3/V6 touch controller binding
> into separate document.

One if: block is fine, so IMO, this should stay in original binding
especially that more devices like some azoteq or semtech might have same
rule of not requiring interrupt line. Anyway, no big deal.

> 
> Reviewed-by: Frank Li <Frank.Li@nxp.com>
> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
> ---
> Cc: Conor Dooley <conor+dt@kernel.org>
> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> Cc: Frank Li <Frank.Li@nxp.com>
> Cc: Job Noorman <job@noorman.info>
> Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
> Cc: Rob Herring <robh@kernel.org>
> Cc: devicetree@vger.kernel.org
> Cc: linux-input@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Cc: linux-renesas-soc@vger.kernel.org
> ---
> V2: Fork the Ilitek V3/V6 bindings into separate document
> V3: Add RB from Frank
> V4: No change
> ---
>  .../input/touchscreen/ilitek,ili210x.yaml     | 51 +++++++++++++++++++
>  .../input/touchscreen/trivial-touch.yaml      |  4 --
>  2 files changed, 51 insertions(+), 4 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ilitek,ili210x.yaml
> 
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/ilitek,ili210x.yaml b/Documentation/devicetree/bindings/input/touchscreen/ilitek,ili210x.yaml
> new file mode 100644
> index 0000000000000..1d02aaba64f97
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/touchscreen/ilitek,ili210x.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/touchscreen/ilitek,ili210x.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Ilitek ILI21xx/ILI251x V3/V6 touch screen controller with i2c interface
> +
> +maintainers:
> +  - Frank Li <Frank.Li@nxp.com>
> +  - Marek Vasut <marek.vasut+renesas@mailbox.org>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - ilitek,ili210x
> +      - ilitek,ili2117
> +      - ilitek,ili2120
> +      - ilitek,ili251x
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +  wakeup-source: true
> +
> +allOf:
> +  - $ref: touchscreen.yaml

allOf: should be placed after required: block.

With this one fixed:

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Best regards,
Krzysztof