From: Svyatoslav Ryhel <clamor95@gmail.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Lee Jones <lee@kernel.org>,
Pavel Machek <pavel@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Svyatoslav Ryhel <clamor95@gmail.com>,
David Lechner <dlechner@baylibre.com>,
Tony Lindgren <tony@atomide.com>
Cc: linux-input@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org
Subject: [PATCH v3 8/9] mfd: motorola-cpcap: diverge configuration per-board
Date: Mon, 23 Feb 2026 08:38:57 +0200 [thread overview]
Message-ID: <20260223063858.12208-9-clamor95@gmail.com> (raw)
In-Reply-To: <20260223063858.12208-1-clamor95@gmail.com>
MFD have rigid subdevice structure which does not allow flexible dynamic
subdevice linking. Address this by diverging CPCAP subdevice composition
to take into account board specific configuration.
Create a common default subdevice composition, rename existing subdevice
composition into cpcap_mapphone_mfd_devices since it targets mainly
Mapphone board.
Removed st,6556002 as it is no longer applicable to all cases and
duplicates motorola,cpcap, which is used as the default composition.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
drivers/mfd/motorola-cpcap.c | 101 ++++++++++++++++++++++++++++-------
1 file changed, 83 insertions(+), 18 deletions(-)
diff --git a/drivers/mfd/motorola-cpcap.c b/drivers/mfd/motorola-cpcap.c
index d8243b956f87..516d1e33affa 100644
--- a/drivers/mfd/motorola-cpcap.c
+++ b/drivers/mfd/motorola-cpcap.c
@@ -12,6 +12,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
+#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/sysfs.h>
@@ -24,10 +25,16 @@
#define CPCAP_REGISTER_SIZE 4
#define CPCAP_REGISTER_BITS 16
+struct cpcap_chip_data {
+ const struct mfd_cell *mfd_devices;
+ unsigned int num_devices;
+};
+
struct cpcap_ddata {
struct spi_device *spi;
struct regmap_irq *irqs;
struct regmap_irq_chip_data *irqdata[CPCAP_NR_IRQ_CHIPS];
+ const struct cpcap_chip_data *cdata;
const struct regmap_config *regmap_conf;
struct regmap *regmap;
};
@@ -195,20 +202,6 @@ static int cpcap_init_irq(struct cpcap_ddata *cpcap)
return 0;
}
-static const struct of_device_id cpcap_of_match[] = {
- { .compatible = "motorola,cpcap", },
- { .compatible = "st,6556002", },
- {},
-};
-MODULE_DEVICE_TABLE(of, cpcap_of_match);
-
-static const struct spi_device_id cpcap_spi_ids[] = {
- { .name = "cpcap", },
- { .name = "6556002", },
- {},
-};
-MODULE_DEVICE_TABLE(spi, cpcap_spi_ids);
-
static const struct regmap_config cpcap_regmap_config = {
.reg_bits = 16,
.reg_stride = 4,
@@ -241,7 +234,56 @@ static int cpcap_resume(struct device *dev)
static DEFINE_SIMPLE_DEV_PM_OPS(cpcap_pm, cpcap_suspend, cpcap_resume);
-static const struct mfd_cell cpcap_mfd_devices[] = {
+static const struct mfd_cell cpcap_default_mfd_devices[] = {
+ {
+ .name = "cpcap_adc",
+ .of_compatible = "motorola,cpcap-adc",
+ }, {
+ .name = "cpcap_battery",
+ .of_compatible = "motorola,cpcap-battery",
+ }, {
+ .name = "cpcap-regulator",
+ .of_compatible = "motorola,cpcap-regulator",
+ }, {
+ .name = "cpcap-rtc",
+ .of_compatible = "motorola,cpcap-rtc",
+ }, {
+ .name = "cpcap-pwrbutton",
+ .of_compatible = "motorola,cpcap-pwrbutton",
+ }, {
+ .name = "cpcap-usb-phy",
+ .of_compatible = "motorola,cpcap-usb-phy",
+ }, {
+ .name = "cpcap-led",
+ .id = 0,
+ .of_compatible = "motorola,cpcap-led-red",
+ }, {
+ .name = "cpcap-led",
+ .id = 1,
+ .of_compatible = "motorola,cpcap-led-green",
+ }, {
+ .name = "cpcap-led",
+ .id = 2,
+ .of_compatible = "motorola,cpcap-led-blue",
+ }, {
+ .name = "cpcap-led",
+ .id = 3,
+ .of_compatible = "motorola,cpcap-led-adl",
+ }, {
+ .name = "cpcap-led",
+ .id = 4,
+ .of_compatible = "motorola,cpcap-led-cp",
+ }, {
+ .name = "cpcap-codec",
+ },
+};
+
+static const struct cpcap_chip_data cpcap_default_data = {
+ .mfd_devices = cpcap_default_mfd_devices,
+ .num_devices = ARRAY_SIZE(cpcap_default_mfd_devices),
+};
+
+static const struct mfd_cell cpcap_mapphone_mfd_devices[] = {
{
.name = "cpcap_adc",
.of_compatible = "motorola,mapphone-cpcap-adc",
@@ -285,7 +327,12 @@ static const struct mfd_cell cpcap_mfd_devices[] = {
.of_compatible = "motorola,cpcap-led-cp",
}, {
.name = "cpcap-codec",
- }
+ },
+};
+
+static const struct cpcap_chip_data cpcap_mapphone_data = {
+ .mfd_devices = cpcap_mapphone_mfd_devices,
+ .num_devices = ARRAY_SIZE(cpcap_mapphone_mfd_devices),
};
static int cpcap_probe(struct spi_device *spi)
@@ -297,6 +344,10 @@ static int cpcap_probe(struct spi_device *spi)
if (!cpcap)
return -ENOMEM;
+ cpcap->cdata = device_get_match_data(&spi->dev);
+ if (!cpcap->cdata)
+ return -ENODEV;
+
cpcap->spi = spi;
spi_set_drvdata(spi, cpcap);
@@ -331,10 +382,24 @@ static int cpcap_probe(struct spi_device *spi)
spi->dev.coherent_dma_mask = 0;
spi->dev.dma_mask = &spi->dev.coherent_dma_mask;
- return devm_mfd_add_devices(&spi->dev, 0, cpcap_mfd_devices,
- ARRAY_SIZE(cpcap_mfd_devices), NULL, 0, NULL);
+ return devm_mfd_add_devices(&spi->dev, 0, cpcap->cdata->mfd_devices,
+ cpcap->cdata->num_devices, NULL, 0, NULL);
}
+static const struct of_device_id cpcap_of_match[] = {
+ { .compatible = "motorola,cpcap", .data = &cpcap_default_data },
+ { .compatible = "motorola,mapphone-cpcap", .data = &cpcap_mapphone_data },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, cpcap_of_match);
+
+static const struct spi_device_id cpcap_spi_ids[] = {
+ { .name = "cpcap", .driver_data = (kernel_ulong_t)&cpcap_default_data },
+ { .name = "mapphone-cpcap", .driver_data = (kernel_ulong_t)&cpcap_mapphone_data },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(spi, cpcap_spi_ids);
+
static struct spi_driver cpcap_driver = {
.driver = {
.name = "cpcap-core",
--
2.51.0
next prev parent reply other threads:[~2026-02-23 6:39 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-23 6:38 [PATCH v3 0/9] mfd: cpcap: convert documentation to schema and add Mot board support Svyatoslav Ryhel
2026-02-23 6:38 ` [PATCH v3 1/9] dt-bindings: regulator: cpcap-regulator: convert to DT schema Svyatoslav Ryhel
2026-02-23 9:54 ` Rob Herring (Arm)
2026-02-23 15:50 ` Rob Herring (Arm)
2026-02-26 18:55 ` Mark Brown
2026-02-23 6:38 ` [PATCH v3 2/9] dt-bindings: regulator: cpcap-regulator: document Mot regulator Svyatoslav Ryhel
2026-02-23 6:38 ` [PATCH v3 3/9] regulator: cpcap-regulator: add support for Mot regulators Svyatoslav Ryhel
2026-02-23 6:38 ` [PATCH v3 4/9] dt-bindings: leds: leds-cpcap: convert to DT schema Svyatoslav Ryhel
2026-02-23 9:54 ` Rob Herring (Arm)
2026-02-23 6:38 ` [PATCH v3 5/9] dt-bindings: input: cpcap-pwrbutton: " Svyatoslav Ryhel
2026-02-23 9:54 ` Rob Herring (Arm)
2026-02-23 16:46 ` Rob Herring (Arm)
2026-02-23 22:02 ` Dmitry Torokhov
2026-02-23 6:38 ` [PATCH v3 6/9] dt-bindings: mfd: motorola-cpcap: " Svyatoslav Ryhel
2026-03-05 23:57 ` Rob Herring (Arm)
2026-02-23 6:38 ` [PATCH v3 7/9] dt-bindings: mfd: motorola-cpcap: document Mapphone and Mot CPCAP Svyatoslav Ryhel
2026-03-05 23:58 ` Rob Herring (Arm)
2026-02-23 6:38 ` Svyatoslav Ryhel [this message]
2026-02-23 6:38 ` [PATCH v3 9/9] mfd: motorola-cpcap: add support for Mot CPCAP composition Svyatoslav Ryhel
2026-02-26 22:13 ` (subset) [PATCH v3 0/9] mfd: cpcap: convert documentation to schema and add Mot board support Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260223063858.12208-9-clamor95@gmail.com \
--to=clamor95@gmail.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=dmitry.torokhov@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=pavel@kernel.org \
--cc=robh@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox