From: Svyatoslav Ryhel <clamor95@gmail.com>
To: "Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Dmitry Torokhov" <dmitry.torokhov@gmail.com>,
"Lee Jones" <lee@kernel.org>, "Pavel Machek" <pavel@kernel.org>,
"Sebastian Reichel" <sre@kernel.org>,
"Svyatoslav Ryhel" <clamor95@gmail.com>,
"Ion Agorria" <ion@agorria.com>,
"Michał Mirosław" <mirq-linux@rere.qmqm.pl>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-input@vger.kernel.org, linux-leds@vger.kernel.org,
linux-pm@vger.kernel.org
Subject: [PATCH v5 1/7] dt-bindings: embedded-controller: document ASUS Transformer EC
Date: Wed, 4 Mar 2026 20:57:45 +0200 [thread overview]
Message-ID: <20260304185751.83494-2-clamor95@gmail.com> (raw)
In-Reply-To: <20260304185751.83494-1-clamor95@gmail.com>
Document embedded controller used in ASUS Transformer device series.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
---
.../asus,tf201-ec-pad.yaml | 119 ++++++++++++++++++
1 file changed, 119 insertions(+)
create mode 100644 Documentation/devicetree/bindings/embedded-controller/asus,tf201-ec-pad.yaml
diff --git a/Documentation/devicetree/bindings/embedded-controller/asus,tf201-ec-pad.yaml b/Documentation/devicetree/bindings/embedded-controller/asus,tf201-ec-pad.yaml
new file mode 100644
index 000000000000..60b6375864aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/embedded-controller/asus,tf201-ec-pad.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/embedded-controller/asus,tf201-ec-pad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASUS Transformer's Embedded Controller
+
+description:
+ Several Nuvoton based Embedded Controllers attached to an I2C bus,
+ running a custom ASUS firmware, specific to the ASUS Transformer
+ device series.
+
+maintainers:
+ - Svyatoslav Ryhel <clamor95@gmail.com>
+
+properties:
+ compatible:
+ description:
+ The 'pad' suffix is used for the controller within the tablet, while
+ the 'dock' suffix refers to the controller in the mobile dock keyboard.
+ oneOf:
+ - enum:
+ - asus,sl101-ec-dock
+ - asus,tf101-ec-dock
+ - asus,tf201-ec-pad
+ - asus,tf600t-ec-dock
+ - asus,tf600t-ec-pad
+
+ - items:
+ - enum:
+ - asus,tf101g-ec-dock
+ - asus,tf201-ec-dock
+ - asus,tf300t-ec-dock
+ - asus,tf300tg-ec-dock
+ - asus,tf300tl-ec-dock
+ - asus,tf700t-ec-dock
+ - const: asus,tf101-ec-dock
+
+ - items:
+ - enum:
+ - asus,tf300t-ec-pad
+ - asus,tf300tg-ec-pad
+ - asus,tf300tl-ec-pad
+ - asus,tf700t-ec-pad
+ - const: asus,tf201-ec-pad
+
+ - items:
+ - enum:
+ - asus,tf701t-ec-dock
+ - const: asus,tf600t-ec-dock
+
+ - items:
+ - enum:
+ - asus,p1801-t-ec-pad
+ - asus,tf701t-ec-pad
+ - const: asus,tf600t-ec-pad
+
+ reg:
+ description:
+ The ASUS Transformer EC has a main I2C address and an associated
+ DockRAM device, which provides power-related functions for the
+ embedded controller. Both addresses are required for operation.
+ minItems: 2
+
+ reg-names:
+ items:
+ - const: ec
+ - const: dockram
+
+ interrupts:
+ maxItems: 1
+
+ request-gpios:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+
+allOf:
+ - $ref: /schemas/power/supply/power-supply.yaml
+ - if:
+ properties:
+ compatible:
+ not:
+ contains:
+ const: asus,tf600t-ec-dock
+ then:
+ required:
+ - interrupts
+ - request-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ embedded-controller@19 {
+ compatible = "asus,tf201-ec-dock", "asus,tf101-ec-dock";
+ reg = <0x19>, <0x1b>;
+ reg-names = "ec", "dockram";
+
+ interrupt-parent = <&gpio>;
+ interrupts = <151 IRQ_TYPE_LEVEL_LOW>;
+
+ request-gpios = <&gpio 134 GPIO_ACTIVE_LOW>;
+
+ monitored-battery = <&dock_battery>;
+ };
+ };
+...
--
2.51.0
next prev parent reply other threads:[~2026-03-04 18:58 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-04 18:57 [PATCH v5 0/7] mfd: Add support for Asus Transformer embedded controller Svyatoslav Ryhel
2026-03-04 18:57 ` Svyatoslav Ryhel [this message]
2026-03-12 14:00 ` [PATCH v5 1/7] dt-bindings: embedded-controller: document ASUS Transformer EC Rob Herring (Arm)
2026-03-04 18:57 ` [PATCH v5 2/7] mfd: Add driver for ASUS Transformer embedded controller Svyatoslav Ryhel
2026-03-07 0:51 ` kernel test robot
2026-03-07 1:56 ` kernel test robot
2026-03-04 18:57 ` [PATCH v5 3/7] input: serio: Add driver for ASUS Transformer dock keyboard and touchpad Svyatoslav Ryhel
2026-03-04 18:57 ` [PATCH v5 4/7] input: keyboard: Add driver for ASUS Transformer dock multimedia keys Svyatoslav Ryhel
2026-03-04 18:57 ` [PATCH v5 5/7] leds: Add driver for ASUS Transformer LEDs Svyatoslav Ryhel
2026-03-04 18:57 ` [PATCH v5 6/7] power: supply: Add driver for ASUS Transformer battery Svyatoslav Ryhel
2026-03-11 6:30 ` Sebastian Reichel
2026-03-11 8:14 ` Svyatoslav Ryhel
2026-03-04 18:57 ` [PATCH v5 7/7] power: supply: Add charger driver for Asus Transformers Svyatoslav Ryhel
2026-03-11 6:47 ` Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260304185751.83494-2-clamor95@gmail.com \
--to=clamor95@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=ion@agorria.com \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mirq-linux@rere.qmqm.pl \
--cc=pavel@kernel.org \
--cc=robh@kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox