From: Sanjay Chitroda <sanjayembeddedse@gmail.com>
To: jikos@kernel.org, jic23@kernel.org, srinivas.pandruvada@linux.intel.com
Cc: dlechner@baylibre.com, nuno.sa@analog.com, andy@kernel.org,
sanjayembeddedse@gmail.com, sakari.ailus@linux.intel.com,
linux-input@vger.kernel.org, linux-iio@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v4 09/36] iio: humidity: hid-sensor-humidity: align parenthesis for readability
Date: Mon, 25 May 2026 00:50:32 +0530 [thread overview]
Message-ID: <20260524192059.1193716-10-sanjayembedded@gmail.com> (raw)
In-Reply-To: <20260524192059.1193716-1-sanjayembedded@gmail.com>
From: Sanjay Chitroda <sanjayembeddedse@gmail.com>
Adjust alignment of parentheses to improve readability and
maintain consistency with kernel coding style
Signed-off-by: Sanjay Chitroda <sanjayembeddedse@gmail.com>
---
drivers/iio/humidity/hid-sensor-humidity.c | 46 +++++++++++-----------
1 file changed, 23 insertions(+), 23 deletions(-)
diff --git a/drivers/iio/humidity/hid-sensor-humidity.c b/drivers/iio/humidity/hid-sensor-humidity.c
index be2338d5f407..6fed019f4099 100644
--- a/drivers/iio/humidity/hid-sensor-humidity.c
+++ b/drivers/iio/humidity/hid-sensor-humidity.c
@@ -45,7 +45,7 @@ static const struct iio_chan_spec humidity_channels[] = {
/* Adjust channel real bits based on report descriptor */
static void humidity_adjust_channel_bit_mask(struct iio_chan_spec *channels,
- int channel, int size)
+ int channel, int size)
{
channels[channel].scan_type.sign = 's';
/* Real storage bits will change based on the report desc. */
@@ -55,8 +55,8 @@ static void humidity_adjust_channel_bit_mask(struct iio_chan_spec *channels,
}
static int humidity_read_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int *val, int *val2, long mask)
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
{
struct hid_humidity_state *humid_st = iio_priv(indio_dev);
@@ -101,8 +101,8 @@ static int humidity_read_raw(struct iio_dev *indio_dev,
}
static int humidity_write_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int val, int val2, long mask)
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
{
struct hid_humidity_state *humid_st = iio_priv(indio_dev);
@@ -127,7 +127,7 @@ static const struct iio_info humidity_info = {
/* Callback handler to send event after all samples are received and captured */
static int humidity_proc_event(struct hid_sensor_hub_device *hsdev,
- unsigned int usage_id, void *pdev)
+ unsigned int usage_id, void *pdev)
{
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct hid_humidity_state *humid_st = iio_priv(indio_dev);
@@ -141,8 +141,8 @@ static int humidity_proc_event(struct hid_sensor_hub_device *hsdev,
/* Capture samples in local storage */
static int humidity_capture_sample(struct hid_sensor_hub_device *hsdev,
- unsigned int usage_id, size_t raw_len,
- char *raw_data, void *pdev)
+ unsigned int usage_id, size_t raw_len,
+ char *raw_data, void *pdev)
{
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct hid_humidity_state *humid_st = iio_priv(indio_dev);
@@ -159,17 +159,17 @@ static int humidity_capture_sample(struct hid_sensor_hub_device *hsdev,
/* Parse report which is specific to an usage id */
static int humidity_parse_report(struct platform_device *pdev,
- struct hid_sensor_hub_device *hsdev,
- struct iio_chan_spec *channels,
- unsigned int usage_id,
- struct hid_humidity_state *st)
+ struct hid_sensor_hub_device *hsdev,
+ struct iio_chan_spec *channels,
+ unsigned int usage_id,
+ struct hid_humidity_state *st)
{
int ret;
ret = sensor_hub_input_get_attribute_info(hsdev, HID_INPUT_REPORT,
- usage_id,
- HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY,
- &st->humidity_attr);
+ usage_id,
+ HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY,
+ &st->humidity_attr);
if (ret < 0)
return ret;
@@ -208,20 +208,20 @@ static int hid_humidity_probe(struct platform_device *pdev)
humid_st->common_attributes.pdev = pdev;
ret = hid_sensor_parse_common_attributes(hsdev,
- HID_USAGE_SENSOR_HUMIDITY,
- &humid_st->common_attributes,
- humidity_sensitivity_addresses,
- ARRAY_SIZE(humidity_sensitivity_addresses));
+ HID_USAGE_SENSOR_HUMIDITY,
+ &humid_st->common_attributes,
+ humidity_sensitivity_addresses,
+ ARRAY_SIZE(humidity_sensitivity_addresses));
if (ret)
return ret;
humid_chans = devm_kmemdup(&indio_dev->dev, humidity_channels,
- sizeof(humidity_channels), GFP_KERNEL);
+ sizeof(humidity_channels), GFP_KERNEL);
if (!humid_chans)
return -ENOMEM;
ret = humidity_parse_report(pdev, hsdev, humid_chans,
- HID_USAGE_SENSOR_HUMIDITY, humid_st);
+ HID_USAGE_SENSOR_HUMIDITY, humid_st);
if (ret)
return ret;
@@ -234,7 +234,7 @@ static int hid_humidity_probe(struct platform_device *pdev)
atomic_set(&humid_st->common_attributes.data_ready, 0);
ret = hid_sensor_setup_trigger(indio_dev, name,
- &humid_st->common_attributes);
+ &humid_st->common_attributes);
if (ret)
return ret;
@@ -242,7 +242,7 @@ static int hid_humidity_probe(struct platform_device *pdev)
humidity_callbacks.pdev = pdev;
ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_HUMIDITY,
- &humidity_callbacks);
+ &humidity_callbacks);
if (ret)
goto error_remove_trigger;
--
2.34.1
prev parent reply other threads:[~2026-05-24 19:21 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-24 19:20 [PATCH v4 00/36] HID: iio: basic clean up and introduce devm_ API for HID sensors Sanjay Chitroda
2026-05-24 19:20 ` [PATCH v4 01/36] iio: hid-sensors: add missing blank line after declarations Sanjay Chitroda
2026-05-24 19:20 ` [PATCH v4 02/36] iio: gyro: hid-sensor-gyro-3d: use u32 instead of unsigned Sanjay Chitroda
2026-05-24 19:20 ` [PATCH v4 03/36] iio: accel: hid-sensor-accel-3d: " Sanjay Chitroda
2026-05-24 19:20 ` [PATCH v4 04/36] iio: light: hid-sensor-als: " Sanjay Chitroda
2026-05-24 19:20 ` [PATCH v4 05/36] iio: light: hid-sensor-prox: " Sanjay Chitroda
2026-05-24 19:20 ` [PATCH v4 06/36] iio: orientation: hid-sensor-incl-3d: " Sanjay Chitroda
2026-05-24 19:20 ` [PATCH v4 07/36] iio: orientation: hid-sensor-rotation: " Sanjay Chitroda
2026-05-24 19:20 ` [PATCH v4 08/36] iio: pressure: hid-sensor-press: " Sanjay Chitroda
2026-05-24 19:20 ` Sanjay Chitroda [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260524192059.1193716-10-sanjayembedded@gmail.com \
--to=sanjayembeddedse@gmail.com \
--cc=andy@kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=jikos@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=sakari.ailus@linux.intel.com \
--cc=srinivas.pandruvada@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox