Linux Input/HID development
 help / color / mirror / Atom feed
From: "Derek J. Clark" <derekjohn.clark@gmail.com>
To: Jiri Kosina <jikos@kernel.org>, Benjamin Tissoires <bentiss@kernel.org>
Cc: "Pierre-Loup A . Griffais" <pgriffais@valvesoftware.com>,
	Denis Benato <denis.benato@linux.dev>,
	Zhouwang Huang <honjow311@gmail.com>,
	"Derek J . Clark" <derekjohn.clark@gmail.com>,
	linux-input@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v10 4/4] HID: hid-msi: Add Rumble Intensity Attributes
Date: Wed, 27 May 2026 22:21:22 +0000	[thread overview]
Message-ID: <20260527222122.10620-5-derekjohn.clark@gmail.com> (raw)
In-Reply-To: <20260527222122.10620-1-derekjohn.clark@gmail.com>

Adds intensity adjustment for the left and right rumble motors.

Claude was used during the reverse-engineering data gathering for this
feature done by Zhouwang Huang. As the code had already been affected,
I used Claude to create the initial framing for the feature, then did
manual cleanup of the _show and _store functions afterwards to fix bugs
and keep the coding style consistent. Claude was also used as an initial
reviewer of this patch.

Assisted-by: Claude:claude-sonnet-4-6
Co-developed-by: Zhouwang Huang <honjow311@gmail.com>
Signed-off-by: Zhouwang Huang <honjow311@gmail.com>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
---
v7:
  - Match on write address for rumble reports to prevent late ACK
    from causing synchronization errors.
  - Use spinlock for read/write profile_pending.
  - Use smp_[store_release|load_acquire] pattern for checking
    gamepad_registered to avoid possible races during teardown.
  - Use struct for rumble reports.
v6:
  - Make all timeouts 25ms to ensure at least 2 jiffies in a 100Hz
    config.
  - Add spinlock_irqsave for read/write access on rumble_intensity
    variables.
  - Gate all attribute show/store functions with gamepad_registered.
v5:
  - Remove mkey related changes.
v2:
  - Use pending_profile and sync to rom mutexes.
---
 drivers/hid/hid-msi.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/hid-msi.c b/drivers/hid/hid-msi.c
index 96710d80543d4..17b0707ecd46d 100644
--- a/drivers/hid/hid-msi.c
+++ b/drivers/hid/hid-msi.c
@@ -266,6 +266,11 @@ static const u16 button_mapping_addr_new[] = {
 static const u16 rgb_addr_old = 0x01fa;
 static const u16 rgb_addr_new = 0x024a;
 
+static const u16 rumble_addr[] = {
+	0x0022,  /* left  */
+	0x0023,  /* right */
+};
+
 struct claw_command_report {
 	u8 report_id;
 	u8 padding[2];
@@ -308,6 +313,12 @@ struct claw_rgb_report {
 	struct rgb_frame zone_data;
 } __packed;
 
+struct claw_rumble_report {
+	struct claw_profile_report;
+	u8 padding;
+	u8 intensity;
+} __packed;
+
 struct claw_drvdata {
 	/* MCU General Variables */
 	enum claw_profile_ack_pending profile_pending;
@@ -332,8 +343,12 @@ struct claw_drvdata {
 	enum claw_gamepad_mode_index gamepad_mode;
 	u8 m1_codes[CLAW_KEYS_MAX];
 	u8 m2_codes[CLAW_KEYS_MAX];
-	spinlock_t mode_lock; /* Lock for mode data read/write */
+	u8 rumble_intensity_right;
+	u8 rumble_intensity_left;
 	const u16 *bmap_addr;
+	spinlock_t rumble_lock; /* lock for rumble_intensity read/write */
+	spinlock_t mode_lock; /* Lock for mode data read/write */
+	bool rumble_support;
 	bool gp_registered;
 	bool bmap_support;
 
-- 
2.53.0


  parent reply	other threads:[~2026-05-27 22:21 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-27 22:21 [PATCH v10 0/4] Add MSI Claw HID Configuration Driver Derek J. Clark
2026-05-27 22:21 ` [PATCH v10 1/4] HID: hid-msi: Add MSI Claw configuration driver Derek J. Clark
2026-05-27 22:56   ` sashiko-bot
2026-05-28  5:32   ` Dmitry Torokhov
2026-05-27 22:21 ` [PATCH v10 2/4] HID: hid-msi: Add M-key mapping attributes Derek J. Clark
2026-05-27 23:34   ` sashiko-bot
2026-05-27 22:21 ` [PATCH v10 3/4] HID: hid-msi: Add RGB control interface Derek J. Clark
2026-05-28  0:03   ` sashiko-bot
2026-05-27 22:21 ` Derek J. Clark [this message]
2026-05-28  0:43   ` [PATCH v10 4/4] HID: hid-msi: Add Rumble Intensity Attributes sashiko-bot
2026-05-28  0:49     ` Derek J. Clark

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260527222122.10620-5-derekjohn.clark@gmail.com \
    --to=derekjohn.clark@gmail.com \
    --cc=bentiss@kernel.org \
    --cc=denis.benato@linux.dev \
    --cc=honjow311@gmail.com \
    --cc=jikos@kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pgriffais@valvesoftware.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox