From: Rosen Penev <rosenp@gmail.com>
To: linux-input@vger.kernel.org
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@collabora.com>,
linux-kernel@vger.kernel.org (open list:ARM/Mediatek SoC support),
linux-arm-kernel@lists.infradead.org (moderated
list:ARM/Mediatek SoC support),
linux-mediatek@lists.infradead.org (moderated list:ARM/Mediatek
SoC support)
Subject: [PATCH] Input: mtk-pmic-keys: Use flexible array member for keys
Date: Wed, 27 May 2026 15:38:49 -0700 [thread overview]
Message-ID: <20260527223849.25139-1-rosenp@gmail.com> (raw)
Convert the fixed-size keys array to a flexible array member and use
struct_size() for allocation. Move the key count validation before
allocation and use for_each_available_child_of_node_scoped() to iterate
only over available child nodes as the allocation uses
of_get_available_child_count.
Also use a key variable in the loop for clarity.
Use of_device_get_match_data() to fetch the PMIC key register data directly
instead of open-coding an of_match_device() lookup.
This also lets the driver drop the of_device.h include.
Remove platform_set_drvdata. Unused anywhere.
Assisted-by: OpenCode:BigPickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
drivers/input/keyboard/mtk-pmic-keys.c | 55 ++++++++++++--------------
1 file changed, 25 insertions(+), 30 deletions(-)
diff --git a/drivers/input/keyboard/mtk-pmic-keys.c b/drivers/input/keyboard/mtk-pmic-keys.c
index c78d9f6d97c4..5b8650f46105 100644
--- a/drivers/input/keyboard/mtk-pmic-keys.c
+++ b/drivers/input/keyboard/mtk-pmic-keys.c
@@ -16,7 +16,6 @@
#include <linux/mfd/mt6397/core.h>
#include <linux/mfd/mt6397/registers.h>
#include <linux/module.h>
-#include <linux/of_device.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
@@ -147,7 +146,7 @@ struct mtk_pmic_keys {
struct input_dev *input_dev;
struct device *dev;
struct regmap *regmap;
- struct mtk_pmic_keys_info keys[MTK_PMIC_MAX_KEY_COUNT];
+ struct mtk_pmic_keys_info keys[];
};
enum mtk_pmic_keys_lp_mode {
@@ -332,17 +331,25 @@ static int mtk_pmic_keys_probe(struct platform_device *pdev)
static const char *const irqnames_r[] = { "powerkey_r", "homekey_r" };
struct mtk_pmic_keys *keys;
const struct mtk_pmic_regs *mtk_pmic_regs;
+ struct mtk_pmic_keys_info *key;
struct input_dev *input_dev;
- const struct of_device_id *of_id =
- of_match_device(of_mtk_pmic_keys_match_tbl, &pdev->dev);
- keys = devm_kzalloc(&pdev->dev, sizeof(*keys), GFP_KERNEL);
+ keycount = of_get_available_child_count(node);
+ if (keycount > MTK_PMIC_MAX_KEY_COUNT ||
+ keycount > ARRAY_SIZE(irqnames)) {
+ dev_err(&pdev->dev, "too many keys defined (%d)\n", keycount);
+ return -EINVAL;
+ }
+
+ keys = devm_kzalloc(&pdev->dev, struct_size(keys, keys, keycount), GFP_KERNEL);
if (!keys)
return -ENOMEM;
keys->dev = &pdev->dev;
keys->regmap = pmic_chip->regmap;
- mtk_pmic_regs = of_id->data;
+ mtk_pmic_regs = of_device_get_match_data(&pdev->dev);
+ if (!mtk_pmic_regs)
+ return -EINVAL;
keys->input_dev = input_dev = devm_input_allocate_device(keys->dev);
if (!input_dev) {
@@ -356,31 +363,21 @@ static int mtk_pmic_keys_probe(struct platform_device *pdev)
input_dev->id.product = 0x0001;
input_dev->id.version = 0x0001;
- keycount = of_get_available_child_count(node);
- if (keycount > MTK_PMIC_MAX_KEY_COUNT ||
- keycount > ARRAY_SIZE(irqnames)) {
- dev_err(keys->dev, "too many keys defined (%d)\n", keycount);
- return -EINVAL;
- }
+ for_each_available_child_of_node_scoped(node, child) {
+ key = &keys->keys[index];
+ key->regs = &mtk_pmic_regs->keys_regs[index];
- for_each_child_of_node_scoped(node, child) {
- keys->keys[index].regs = &mtk_pmic_regs->keys_regs[index];
-
- keys->keys[index].irq =
- platform_get_irq_byname(pdev, irqnames[index]);
- if (keys->keys[index].irq < 0)
- return keys->keys[index].irq;
+ key->irq = platform_get_irq_byname(pdev, irqnames[index]);
+ if (key->irq < 0)
+ return key->irq;
if (mtk_pmic_regs->key_release_irq) {
- keys->keys[index].irq_r = platform_get_irq_byname(pdev,
- irqnames_r[index]);
-
- if (keys->keys[index].irq_r < 0)
- return keys->keys[index].irq_r;
+ key->irq_r = platform_get_irq_byname(pdev, irqnames_r[index]);
+ if (key->irq_r < 0)
+ return key->irq_r;
}
- error = of_property_read_u32(child,
- "linux,keycodes", &keys->keys[index].keycode);
+ error = of_property_read_u32(child, "linux,keycodes", &key->keycode);
if (error) {
dev_err(keys->dev,
"failed to read key:%d linux,keycode property: %d\n",
@@ -389,9 +386,9 @@ static int mtk_pmic_keys_probe(struct platform_device *pdev)
}
if (of_property_read_bool(child, "wakeup-source"))
- keys->keys[index].wakeup = true;
+ key->wakeup = true;
- error = mtk_pmic_key_setup(keys, &keys->keys[index]);
+ error = mtk_pmic_key_setup(keys, key);
if (error)
return error;
@@ -407,8 +404,6 @@ static int mtk_pmic_keys_probe(struct platform_device *pdev)
mtk_pmic_keys_lp_reset_setup(keys, mtk_pmic_regs);
- platform_set_drvdata(pdev, keys);
-
return 0;
}
--
2.54.0
next reply other threads:[~2026-05-27 22:39 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-27 22:38 Rosen Penev [this message]
2026-05-27 23:05 ` [PATCH] Input: mtk-pmic-keys: Use flexible array member for keys sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260527223849.25139-1-rosenp@gmail.com \
--to=rosenp@gmail.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox