From: Denis Benato <denis.benato@linux.dev>
To: linux-kernel@vger.kernel.org
Cc: linux-input@vger.kernel.org,
"Benjamin Tissoires" <bentiss@kernel.org>,
"Jiri Kosina" <jikos@kernel.org>,
"Luke D . Jones" <luke@ljones.dev>,
"Mateusz Schyboll" <dragonn@op.pl>,
"Denis Benato" <benato.denis96@gmail.com>,
"Denis Benato" <denis.benato@linux.dev>,
"Antheas Kapenekakis" <lkml@antheas.dev>
Subject: [PATCH v2 3/4] HID: asus: add support for xgm led
Date: Fri, 12 Jun 2026 14:23:25 +0000 [thread overview]
Message-ID: <20260612142326.1704858-4-denis.benato@linux.dev> (raw)
In-Reply-To: <20260612142326.1704858-1-denis.benato@linux.dev>
XG mobile stations have very bright leds behind the fan that can be
turned either ON or OFF: add a cled interface to allow controlling the
brightness of those red leds.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
---
drivers/hid/hid-asus.c | 70 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 70 insertions(+)
diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c
index 323dc0b7f3ff..21c4a60d224e 100644
--- a/drivers/hid/hid-asus.c
+++ b/drivers/hid/hid-asus.c
@@ -51,6 +51,8 @@ MODULE_DESCRIPTION("Asus HID Keyboard and TouchPad");
#define FEATURE_KBD_LED_REPORT_ID1 0x5d
#define FEATURE_KBD_LED_REPORT_ID2 0x5e
+#define ROG_XGM_REPORT_SIZE 300
+
#define ROG_ALLY_REPORT_SIZE 64
#define ROG_ALLY_X_MIN_MCU 313
#define ROG_ALLY_MIN_MCU 319
@@ -118,6 +120,11 @@ struct asus_kbd_leds {
bool removed;
};
+struct asus_xgm_led {
+ struct led_classdev cdev;
+ struct hid_device *hdev;
+};
+
struct asus_touchpad_info {
int max_x;
int max_y;
@@ -143,6 +150,7 @@ struct asus_drvdata {
unsigned long battery_next_query;
struct work_struct fn_lock_sync_work;
bool fn_lock;
+ struct asus_xgm_led *xgm_led;
};
static int asus_report_battery(struct asus_drvdata *, u8 *, int);
@@ -941,6 +949,23 @@ static int asus_battery_probe(struct hid_device *hdev)
return ret;
}
+static int asus_xgm_led_set(struct led_classdev *led_cdev, enum led_brightness value)
+{
+ const u8 buf[ROG_XGM_REPORT_SIZE] = {
+ FEATURE_KBD_LED_REPORT_ID2, 0xC5, (value) ? 0x50 : 0x00
+ };
+ struct asus_xgm_led *xgm = container_of(led_cdev, struct asus_xgm_led, cdev);
+ int ret;
+
+ ret = asus_kbd_set_report(xgm->hdev, buf, ROG_XGM_REPORT_SIZE);
+ if (ret != ROG_XGM_REPORT_SIZE) {
+ hid_err(xgm->hdev, "Unable to set XG mobile led state: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
static int asus_input_configured(struct hid_device *hdev, struct hid_input *hi)
{
struct input_dev *input = hi->input;
@@ -1184,6 +1209,14 @@ static int __maybe_unused asus_resume(struct hid_device *hdev)
}
}
+ if (drvdata->xgm_led) {
+ ret = asus_xgm_led_set(&drvdata->xgm_led->cdev, drvdata->xgm_led->cdev.brightness);
+ if (ret) {
+ hid_err(hdev, "Asus failed to restore xgm brightness: %d\n", ret);
+ goto asus_resume_err;
+ }
+ }
+
asus_resume_err:
return ret;
}
@@ -1310,6 +1343,40 @@ static int asus_probe(struct hid_device *hdev, const struct hid_device_id *id)
}
}
+ if (asus_has_report_id(hdev, FEATURE_KBD_REPORT_ID) &&
+ ((hdev->product == USB_DEVICE_ID_ASUSTEK_XGM_2022) ||
+ (hdev->product == USB_DEVICE_ID_ASUSTEK_XGM_2023))) {
+ drvdata->xgm_led = devm_kzalloc(&hdev->dev, sizeof(*drvdata->xgm_led), GFP_KERNEL);
+ if (drvdata->xgm_led == NULL) {
+ ret = -ENOMEM;
+ goto err_stop_hw;
+ }
+ drvdata->xgm_led->hdev = hdev;
+ drvdata->xgm_led->cdev.name = devm_kasprintf(&hdev->dev, GFP_KERNEL,
+ "asus:xgm-%s:led",
+ strlen(hdev->uniq) ?
+ hdev->uniq : dev_name(&hdev->dev));
+ drvdata->xgm_led->cdev.brightness = 1;
+ drvdata->xgm_led->cdev.max_brightness = 1;
+ drvdata->xgm_led->cdev.brightness_set_blocking = asus_xgm_led_set;
+
+ /*
+ * Sometimes after a reboot LEDs are ON, sometimes are OFF: set them to
+ * what the default brightness resets when doing a cold boot.
+ */
+ ret = asus_xgm_led_set(&drvdata->xgm_led->cdev, drvdata->xgm_led->cdev.brightness);
+ if (ret) {
+ hid_err(hdev, "Asus failed to set xgm led: %d\n", ret);
+ goto err_stop_hw;
+ }
+
+ ret = led_classdev_register(&hdev->dev, &drvdata->xgm_led->cdev);
+ if (ret) {
+ hid_err(hdev, "Asus failed to register xgm led: %d\n", ret);
+ goto err_stop_hw;
+ }
+ }
+
/* Laptops keyboard backlight is always at 0x5a */
if (is_vendor && (drvdata->quirks & QUIRK_USE_KBD_BACKLIGHT) &&
(asus_has_report_id(hdev, FEATURE_KBD_REPORT_ID)) &&
@@ -1366,6 +1433,9 @@ static void asus_remove(struct hid_device *hdev)
if (drvdata->quirks & QUIRK_HID_FN_LOCK)
cancel_work_sync(&drvdata->fn_lock_sync_work);
+ if (drvdata->xgm_led)
+ led_classdev_unregister(&drvdata->xgm_led->cdev);
+
hid_hw_stop(hdev);
}
--
2.47.3
next prev parent reply other threads:[~2026-06-12 14:23 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-12 14:23 [PATCH v2 0/4] HID: asus: security fixes and more hardware support Denis Benato
2026-06-12 14:23 ` [PATCH v2 1/4] HID: asus: mitigate possible use-after-free Denis Benato
2026-06-12 14:44 ` Antheas Kapenekakis
2026-06-12 14:23 ` [PATCH v2 2/4] HID: asus: prevent wrong pointer cast Denis Benato
2026-06-12 14:38 ` sashiko-bot
2026-06-12 14:48 ` Antheas Kapenekakis
2026-06-12 14:23 ` Denis Benato [this message]
2026-06-12 14:37 ` [PATCH v2 3/4] HID: asus: add support for xgm led sashiko-bot
2026-06-12 14:39 ` Antheas Kapenekakis
2026-06-12 15:56 ` Denis Benato
2026-06-12 14:23 ` [PATCH v2 4/4] HID: asus: add i2c entry for FA808UM and other TUFs Denis Benato
2026-06-12 14:37 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260612142326.1704858-4-denis.benato@linux.dev \
--to=denis.benato@linux.dev \
--cc=benato.denis96@gmail.com \
--cc=bentiss@kernel.org \
--cc=dragonn@op.pl \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lkml@antheas.dev \
--cc=luke@ljones.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox