From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-wm1-f53.google.com (mail-wm1-f53.google.com [209.85.128.53]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id A5D5E199D8 for ; Tue, 30 Jun 2026 23:34:26 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.128.53 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1782862471; cv=none; b=EdmvHSuevZubCeAflmvRu5ogGP7enq2pxflcR4L6tN9RH5zLTOuD+0URLYWwW+54dfh9YCl8j/4rtRb6S/zWozL8s2eN936CForzLu8YH/Y7a1SVaBEueTrwyuCf6Z+aBRtb64BlGyqTAusV/qKZ7JEpCjePAc4LssCa3dEjIL0= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1782862471; c=relaxed/simple; bh=20PLqPpyfyLY9581er7CVgbvh5rydTKebWNvzyDTgUg=; h=From:To:Cc:Subject:Date:Message-ID:MIME-Version; b=oWx4FvE+WfeRirsNCCbtaDhP7Kac4nmtvZ85wgRMGe46KXlBpRdCGEiYCITgVtfb35rgpxoVWF7ga7EK5LgGf8CTKKMsuHCodvM/zyhAZoYl2qL3eqOi/Itqf7CSMwWVeBZvelip2WlHsrks1dh1qpdbdKrN2Vf3YNyzUHSV24w= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=UUmZApbM; arc=none smtp.client-ip=209.85.128.53 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="UUmZApbM" Received: by mail-wm1-f53.google.com with SMTP id 5b1f17b1804b1-493bc8fda98so270145e9.0 for ; Tue, 30 Jun 2026 16:34:26 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20251104; t=1782862465; x=1783467265; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:sender:from:to:cc:subject:date:message-id:reply-to; bh=0MdygMayZBOVO887Wq9zJPKr4JAp61ap8fAwnld5WA0=; b=UUmZApbMcWD69YZtmgOolwGR3JaK3R81Ewc1c46QuTHHqwP7oxJE0ioqsvH1LEdeOT bi5A9MKjb0xPvdJVO42oYYjObDXUtC/zitji0ySMVbTZuCcOTlAjZN4qS0HmwKVEoIcI 5CxzGqCH2/g8rS6ojzk1OJMS9i6uuac2nLa5daD7m9UwkqzL5OBgiMZ+7VNY1Kiy/V9p is1KlEb9hcgIY+7nJUXdCrmwyIhuoESloJfW+7h+jNI9mgLNLsbpYaodNjQmDNa3NJaA ThvKZEIRujnf1VEyV1nP51fhBs8lCFr5/gOVNIvLHppqHdhRNQccibfLRAyx22qUkNuP VFNw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20251104; t=1782862465; x=1783467265; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:sender:x-gm-gg:x-gm-message-state:from:to:cc:subject:date :message-id:reply-to; bh=0MdygMayZBOVO887Wq9zJPKr4JAp61ap8fAwnld5WA0=; b=C4WXyDvdoc12u/USf0G96GtHo2W69V8t4gVHOV18FgJTOMAB3eiE222MU70SATrl6J sx9bCt4FN05MHCqcgJo9uhkBfAFsR7yIgQoE40I+c5XU1I6pr+qDuBnzkiAo//zfpja3 Q+c5OBZDxZSs9CZoc1p7oNHnymuRLx88jC0pr+pcv3K8dMMkXSGPhJgDXPWIZW2YoDjN K67kmkRJfHJyddfyldND0GrBvNHbQQHqsgK0bzQGN4jcFsJjWzVPlvOXwqF7p8YpYOzQ jAz2mTfvTpsWwjPHNa2C8z/cY1fwIXz2x51ckBNi3Utf9Jbmi1SNi8kCBfcXub9H5fFt DtLg== X-Gm-Message-State: AOJu0YwzKjkKimVD4zfslYi59iWIFmPs9rlhcTXQUKej3V++X+bkWDsh sO/oOjeO5jEFDKKFKJ+lJFHYUpPl1N1HoAsXMjGPq2S/ZfKcyciNaJhV X-Gm-Gg: AfdE7cksPqtdSsE11Sr+ll26VOTjS4KXZmFZ8b3N/Z74Xo55qVmKhvAr2hQPR4ztvuM sQ+UGhnsayRTBc4x7cyv0N/dq69EQ0wuXQ7ZJGFd6JK7XQvoc+holfgNd4jkSFDE1fuzyxoBNrQ /q5bixU+b2b337pZnojTEG8tkX0eLZDFBwDgXZpaaPzuiwxmAXFbX+xvonqGGR6NbSlf2vbqhVk b4GLtYuCpM3ts1bx1M7ddsPELZ08q5NZBbjLACwFLFGr0shTeuMVV1JVygs/HBslPsNSuclGiPx aAxy0vY+AQvaCpxteVL74FhLXzZ+WcX0LBIWJyYKE8XYtvVBt+r4i084SHNrGiPPrxTGcCP3HWR W+ci5bwTyM+qlYsITBzcOl41cT8UJ0p1WKOuPfYmFnJmc6nrujulJuqULWaTm1rnzdllXMnSdLG B5Xhix41pT8qKWRHb2WjH3PKQEx1gu0B/JyyR8ypWC2UlScOoF83I= X-Received: by 2002:a05:600c:8411:b0:493:a893:1200 with SMTP id 5b1f17b1804b1-493b82815d4mr71849705e9.5.1782862464121; Tue, 30 Jun 2026 16:34:24 -0700 (PDT) Received: from nixos-office ([2001:8a0:e962:d100:42af:a70c:10b8:87c3]) by smtp.gmail.com with ESMTPSA id 5b1f17b1804b1-493bef183e7sm24797975e9.2.2026.06.30.16.34.22 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 30 Jun 2026 16:34:23 -0700 (PDT) Sender: Julian Braha From: Julian Braha To: jikos@kernel.org, bentiss@kernel.org Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, Julian Braha Subject: [PATCH v3] HID: cleanup help indentation in kconfig Date: Wed, 1 Jul 2026 00:34:16 +0100 Message-ID: <20260630233416.520117-1-julianbraha@gmail.com> X-Mailer: git-send-email 2.54.0 Precedence: bulk X-Mailing-List: linux-input@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit The indentation in this kconfig was all over the place: Half of the 'help' texts were not indented, while the other half indented by the more standard 2 spaces shown in the kconfig documentation. Let's standardize to 2 spaces. Signed-off-by: Julian Braha --- v3: fix even more lines' indentation (sashiko, again) Link to v2: https://lore.kernel.org/all/20260630150134.514348-1-julianbraha@gmail.com/ v2: fix 2 more lines' indentation, thanks sashiko Link to v1: https://lore.kernel.org/all/20260630142043.496559-1-julianbraha@gmail.com/ drivers/hid/Kconfig | 662 ++++++++++++++++++++++---------------------- 1 file changed, 331 insertions(+), 331 deletions(-) diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index f9bcaeb66385..9f72b8b5966b 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -38,77 +38,77 @@ config HID_BATTERY_STRENGTH select POWER_SUPPLY default n help - This option adds support of reporting battery strength (for HID devices - that support this feature) through power_supply class so that userspace - tools, such as upower, can display it. + This option adds support of reporting battery strength (for HID devices + that support this feature) through power_supply class so that userspace + tools, such as upower, can display it. config HIDRAW bool "/dev/hidraw raw HID device support" help - Say Y here if you want to support HID devices (from the USB - specification standpoint) that aren't strictly user interface - devices, like monitor controls and Uninterruptible Power Supplies. + Say Y here if you want to support HID devices (from the USB + specification standpoint) that aren't strictly user interface + devices, like monitor controls and Uninterruptible Power Supplies. - This module supports these devices separately using a separate - event interface on /dev/hidraw. + This module supports these devices separately using a separate + event interface on /dev/hidraw. - There is also a /dev/hiddev configuration option in the USB HID - configuration menu. In comparison to hiddev, this device does not process - the hid events at all (no parsing, no lookups). This lets applications - to work on raw hid events when they want to, and avoid using transport-specific - userspace libhid/libusb libraries. + There is also a /dev/hiddev configuration option in the USB HID + configuration menu. In comparison to hiddev, this device does not process + the hid events at all (no parsing, no lookups). This lets applications + to work on raw hid events when they want to, and avoid using transport-specific + userspace libhid/libusb libraries. - If unsure, say Y. + If unsure, say Y. config UHID tristate "User-space I/O driver support for HID subsystem" default n help - Say Y here if you want to provide HID I/O Drivers from user-space. - This allows to write I/O drivers in user-space and feed the data from - the device into the kernel. The kernel parses the HID reports, loads the - corresponding HID Device Driver or provides input devices on top of your - user-space device. + Say Y here if you want to provide HID I/O Drivers from user-space. + This allows to write I/O drivers in user-space and feed the data from + the device into the kernel. The kernel parses the HID reports, loads the + corresponding HID Device Driver or provides input devices on top of your + user-space device. - This driver cannot be used to parse HID-reports in user-space and write - special HID-drivers. You should use hidraw for that. - Instead, this driver allows to write the transport-layer driver in - user-space like USB-HID and Bluetooth-HID do in kernel-space. + This driver cannot be used to parse HID-reports in user-space and write + special HID-drivers. You should use hidraw for that. + Instead, this driver allows to write the transport-layer driver in + user-space like USB-HID and Bluetooth-HID do in kernel-space. - If unsure, say N. + If unsure, say N. - To compile this driver as a module, choose M here: the - module will be called uhid. + To compile this driver as a module, choose M here: the + module will be called uhid. config HID_GENERIC tristate "Generic HID driver" default HID help - Support for generic devices on the HID bus. This includes most - keyboards and mice, joysticks, tablets and digitizers. + Support for generic devices on the HID bus. This includes most + keyboards and mice, joysticks, tablets and digitizers. - To compile this driver as a module, choose M here: the module - will be called hid-generic. + To compile this driver as a module, choose M here: the module + will be called hid-generic. - If unsure, say Y. + If unsure, say Y. config HID_HAPTIC bool "Haptic touchpad support" default n help - Support for touchpads with force sensors and haptic actuators instead of a - traditional button. - Adds extra parsing and FF device for the hid multitouch driver. - It can be used for Elan 2703 haptic touchpad. + Support for touchpads with force sensors and haptic actuators instead of a + traditional button. + Adds extra parsing and FF device for the hid multitouch driver. + It can be used for Elan 2703 haptic touchpad. - If unsure, say N. + If unsure, say N. menu "Special HID drivers" config HID_A4TECH tristate "A4TECH mice" help - Support for some A4TECH mice with two scroll wheels. + Support for some A4TECH mice with two scroll wheels. config HID_ACCUTOUCH tristate "Accutouch touch device" @@ -118,44 +118,44 @@ config HID_ACCUTOUCH The driver works around a problem in the reported device capabilities which causes userspace to detect the device as a mouse rather than - a touchscreen. + a touchscreen. Say Y here if you have a Accutouch 2216 touch controller. config HID_ACRUX tristate "ACRUX game controller support" help - Say Y here if you want to enable support for ACRUX game controllers. + Say Y here if you want to enable support for ACRUX game controllers. config HID_ACRUX_FF bool "ACRUX force feedback support" depends on HID_ACRUX select INPUT_FF_MEMLESS help - Say Y here if you want to enable force feedback support for ACRUX - game controllers. + Say Y here if you want to enable force feedback support for ACRUX + game controllers. config HID_APPLE tristate "Apple {i,Power,Mac}Books" depends on LEDS_CLASS depends on NEW_LEDS help - Support for some Apple devices which less or more break - HID specification. + Support for some Apple devices which less or more break + HID specification. - Say Y here if you want support for keyboards of Apple iBooks, PowerBooks, - MacBooks, MacBook Pros and Apple Aluminum. + Say Y here if you want support for keyboards of Apple iBooks, PowerBooks, + MacBooks, MacBook Pros and Apple Aluminum. config HID_APPLEIR tristate "Apple infrared receiver" depends on (USB_HID) help - Support for Apple infrared remote control. All the Apple computers from + Support for Apple infrared remote control. All the Apple computers from 2005 onwards include such a port, except the unibody Macbook (2009), and Mac Pros. This receiver is also used in the Apple TV set-top box prior to the 2010 model. - Say Y here if you want support for Apple infrared remote control. + Say Y here if you want support for Apple infrared remote control. config HID_APPLETB_BL tristate "Apple Touch Bar Backlight" @@ -191,34 +191,34 @@ config HID_ASUS depends on ASUS_WMI || ASUS_WMI=n select POWER_SUPPLY help - Support for Asus notebook built-in keyboard and touchpad via i2c, and - the Asus Republic of Gamers laptop keyboard special keys. + Support for Asus notebook built-in keyboard and touchpad via i2c, and + the Asus Republic of Gamers laptop keyboard special keys. - Supported devices: - - EeeBook X205TA - - VivoBook E200HA - - GL553V series - - GL753V series + Supported devices: + - EeeBook X205TA + - VivoBook E200HA + - GL553V series + - GL753V series config HID_AUREAL tristate "Aureal" help - Support for Aureal Cy se W-01RN Remote Controller and other Aureal derived remotes. + Support for Aureal Cy se W-01RN Remote Controller and other Aureal derived remotes. config HID_BELKIN tristate "Belkin Flip KVM and Wireless keyboard" help - Support for Belkin Flip KVM and Wireless keyboard. + Support for Belkin Flip KVM and Wireless keyboard. config HID_BETOP_FF tristate "Betop Production Inc. force feedback support" depends on USB_HID select INPUT_FF_MEMLESS help - Say Y here if you want to enable force feedback support for devices by - BETOP Production Ltd. - Currently the following devices are known to be supported: - - BETOP 2185 PC & BFM MODE + Say Y here if you want to enable force feedback support for devices by + BETOP Production Ltd. + Currently the following devices are known to be supported: + - BETOP 2185 PC & BFM MODE config HID_BIGBEN_FF tristate "BigBen Interactive Kids' gamepad support" @@ -235,54 +235,54 @@ config HID_BIGBEN_FF config HID_CHERRY tristate "Cherry Cymotion keyboard" help - Support for Cherry Cymotion keyboard. + Support for Cherry Cymotion keyboard. config HID_CHICONY tristate "Chicony devices" depends on USB_HID help - Support for Chicony Tactical pad and special keys on Chicony keyboards. + Support for Chicony Tactical pad and special keys on Chicony keyboards. config HID_CORSAIR tristate "Corsair devices" depends on USB_HID && LEDS_CLASS select POWER_SUPPLY help - Support for Corsair devices that are not fully compliant with the - HID standard. - Support for Corsair Void headsets. + Support for Corsair devices that are not fully compliant with the + HID standard. + Support for Corsair Void headsets. - Supported devices: - - Vengeance K90 - - Scimitar PRO RGB - - Corsair Void headsets + Supported devices: + - Vengeance K90 + - Scimitar PRO RGB + - Corsair Void headsets config HID_COUGAR tristate "Cougar devices" help - Support for Cougar devices that are not fully compliant with the - HID standard. + Support for Cougar devices that are not fully compliant with the + HID standard. - Supported devices: - - Cougar 500k Gaming Keyboard + Supported devices: + - Cougar 500k Gaming Keyboard config HID_MACALLY tristate "Macally devices" help - Support for Macally devices that are not fully compliant with the - HID standard. + Support for Macally devices that are not fully compliant with the + HID standard. - supported devices: - - Macally ikey keyboard + supported devices: + - Macally ikey keyboard config HID_PRODIKEYS tristate "Prodikeys PC-MIDI Keyboard support" depends on USB_HID && SND select SND_RAWMIDI help - Support for Prodikeys PC-MIDI Keyboard device support. - Say Y here to enable support for this device. - - Prodikeys PC-MIDI keyboard. + Support for Prodikeys PC-MIDI Keyboard device support. + Say Y here to enable support for this device. + - Prodikeys PC-MIDI keyboard. The Prodikeys PC-MIDI acts as a USB Audio device, with one MIDI input and one MIDI output. These MIDI jacks appear as a sound "card" in the ALSA sound system. @@ -293,97 +293,97 @@ config HID_PRODIKEYS config HID_CMEDIA tristate "CMedia audio chips" help - Support for CMedia CM6533 HID audio jack controls - and HS100B mute buttons. + Support for CMedia CM6533 HID audio jack controls + and HS100B mute buttons. config HID_CP2112 tristate "Silicon Labs CP2112 HID USB-to-SMBus Bridge support" depends on USB_HID && HIDRAW && I2C && GPIOLIB select GPIOLIB_IRQCHIP help - Support for Silicon Labs CP2112 HID USB to SMBus Master Bridge. - This is a HID device driver which registers as an i2c adapter - and gpiochip to expose these functions of the CP2112. The - customizable USB descriptor fields are exposed as sysfs attributes. + Support for Silicon Labs CP2112 HID USB to SMBus Master Bridge. + This is a HID device driver which registers as an i2c adapter + and gpiochip to expose these functions of the CP2112. The + customizable USB descriptor fields are exposed as sysfs attributes. config HID_CREATIVE_SB0540 tristate "Creative SB0540 infrared receiver" depends on USB_HID help - Support for Creative infrared SB0540-compatible remote controls, such - as the RM-1500 and RM-1800 remotes. + Support for Creative infrared SB0540-compatible remote controls, such + as the RM-1500 and RM-1800 remotes. - Say Y here if you want support for Creative SB0540 infrared receiver. + Say Y here if you want support for Creative SB0540 infrared receiver. config HID_CYPRESS tristate "Cypress mouse and barcode readers" help - Support for cypress mouse and barcode readers. + Support for cypress mouse and barcode readers. config HID_DRAGONRISE tristate "DragonRise Inc. game controller" help - Say Y here if you have DragonRise Inc. game controllers. - These might be branded as: - - Tesun USB-703 - - Media-tech MT1504 "Rogue" - - DVTech JS19 "Gear" - - Defender Game Master + Say Y here if you have DragonRise Inc. game controllers. + These might be branded as: + - Tesun USB-703 + - Media-tech MT1504 "Rogue" + - DVTech JS19 "Gear" + - Defender Game Master config DRAGONRISE_FF bool "DragonRise Inc. force feedback" depends on HID_DRAGONRISE select INPUT_FF_MEMLESS help - Say Y here if you want to enable force feedback support for DragonRise Inc. - game controllers. + Say Y here if you want to enable force feedback support for DragonRise Inc. + game controllers. config HID_EMS_FF tristate "EMS Production Inc. force feedback support" select INPUT_FF_MEMLESS help - Say Y here if you want to enable force feedback support for devices by - EMS Production Ltd. - Currently the following devices are known to be supported: - - Trio Linker Plus II + Say Y here if you want to enable force feedback support for devices by + EMS Production Ltd. + Currently the following devices are known to be supported: + - Trio Linker Plus II config HID_ELAN tristate "ELAN USB Touchpad Support" depends on LEDS_CLASS && USB_HID help - Say Y to enable support for the USB ELAN touchpad - Currently the following devices are known to be supported: - - HP Pavilion X2 10-p0XX. + Say Y to enable support for the USB ELAN touchpad + Currently the following devices are known to be supported: + - HP Pavilion X2 10-p0XX. config HID_ELECOM tristate "ELECOM HID devices" help - Support for ELECOM devices: - - BM084 Bluetooth Mouse - - EX-G Trackballs (M-XT3DRBK, M-XT3URBK) - - DEFT Trackballs (M-DT1DRBK, M-DT1URBK, M-DT2DRBK, M-DT2URBK) - - HUGE Trackballs (M-HT1DRBK, M-HT1URBK) - - HUGE Plus Trackball (M-HT1MRBK) + Support for ELECOM devices: + - BM084 Bluetooth Mouse + - EX-G Trackballs (M-XT3DRBK, M-XT3URBK) + - DEFT Trackballs (M-DT1DRBK, M-DT1URBK, M-DT2DRBK, M-DT2URBK) + - HUGE Trackballs (M-HT1DRBK, M-HT1URBK) + - HUGE Plus Trackball (M-HT1MRBK) config HID_ELO tristate "ELO USB 4000/4500 touchscreen" depends on USB_HID help - Support for the ELO USB 4000/4500 touchscreens. Note that this is for - different devices than those handled by CONFIG_TOUCHSCREEN_USB_ELO. + Support for the ELO USB 4000/4500 touchscreens. Note that this is for + different devices than those handled by CONFIG_TOUCHSCREEN_USB_ELO. config HID_EVISION tristate "EVision Keyboards Support" depends on HID help - Support for some EVision keyboards. Note that this is needed only when - applying customization using userspace programs. - Support for some EVision devices requiring report descriptor fixups. + Support for some EVision keyboards. Note that this is needed only when + applying customization using userspace programs. + Support for some EVision devices requiring report descriptor fixups. config HID_EZKEY tristate "Ezkey BTC 8193 keyboard" help - Support for Ezkey BTC 8193 keyboard. + Support for Ezkey BTC 8193 keyboard. config HID_FT260 tristate "FTDI FT260 USB HID to I2C host support" @@ -399,12 +399,12 @@ config HID_FT260 config HID_GEMBIRD tristate "Gembird Joypad" help - Support for Gembird JPD-DualForce 2. + Support for Gembird JPD-DualForce 2. config HID_GFRM tristate "Google Fiber TV Box remote control support" help - Support for Google Fiber TV Box remote controls + Support for Google Fiber TV Box remote controls config HID_GLORIOUS tristate "Glorious PC Gaming Race mice" @@ -416,14 +416,14 @@ config HID_HOLTEK tristate "Holtek HID devices" depends on USB_HID help - Support for Holtek based devices: - - Holtek On Line Grip based game controller - - Trust GXT 18 Gaming Keyboard - - Sharkoon Drakonia / Perixx MX-2000 gaming mice - - Tracer Sniper TRM-503 / NOVA Gaming Slider X200 / - Zalman ZM-GM1 - - SHARKOON DarkGlider Gaming mouse - - LEETGION Hellion Gaming Mouse + Support for Holtek based devices: + - Holtek On Line Grip based game controller + - Trust GXT 18 Gaming Keyboard + - Sharkoon Drakonia / Perixx MX-2000 gaming mice + - Tracer Sniper TRM-503 / NOVA Gaming Slider X200 / + Zalman ZM-GM1 + - SHARKOON DarkGlider Gaming mouse + - LEETGION Hellion Gaming Mouse config HOLTEK_FF bool "Holtek On Line Grip force feedback support" @@ -452,14 +452,14 @@ config HID_GOOGLE_HAMMER select INPUT_VIVALDIFMAP depends on USB_HID && LEDS_CLASS && CROS_EC help - Say Y here if you have a Google Hammer device. + Say Y here if you have a Google Hammer device. config HID_GOOGLE_STADIA_FF tristate "Google Stadia force feedback" select INPUT_FF_MEMLESS help - Say Y here if you want to enable force feedback support for the Google - Stadia controller. + Say Y here if you want to enable force feedback support for the Google + Stadia controller. config HID_VIVALDI tristate "Vivaldi Keyboard" @@ -475,51 +475,51 @@ config HID_GT683R tristate "MSI GT68xR LED support" depends on LEDS_CLASS && USB_HID help - Say Y here if you want to enable support for the three MSI GT68xR LEDs + Say Y here if you want to enable support for the three MSI GT68xR LEDs - This driver support following modes: - - Normal: LEDs are fully on when enabled - - Audio: LEDs brightness depends on sound level - - Breathing: LEDs brightness varies at human breathing rate + This driver support following modes: + - Normal: LEDs are fully on when enabled + - Audio: LEDs brightness depends on sound level + - Breathing: LEDs brightness varies at human breathing rate - Currently the following devices are know to be supported: - - MSI GT683R + Currently the following devices are know to be supported: + - MSI GT683R config HID_KEYTOUCH tristate "Keytouch HID devices" help - Support for Keytouch HID devices not fully compliant with - the specification. Currently supported: + Support for Keytouch HID devices not fully compliant with + the specification. Currently supported: - Keytouch IEC 60945 config HID_KYE tristate "KYE/Genius devices" help - Support for KYE/Genius devices not fully compliant with HID standard: - - Ergo Mouse - - EasyPen i405X tablet - - MousePen i608X tablet - - EasyPen M610X tablet + Support for KYE/Genius devices not fully compliant with HID standard: + - Ergo Mouse + - EasyPen i405X tablet + - MousePen i608X tablet + - EasyPen M610X tablet config HID_KYSONA tristate "Kysona devices" depends on USB_HID help - Support for Kysona mice. + Support for Kysona mice. - Say Y here if you have a Kysona M600 mouse - and want to be able to read its battery capacity. + Say Y here if you have a Kysona M600 mouse + and want to be able to read its battery capacity. config HID_UCLOGIC tristate "UC-Logic" depends on USB_HID help - Support for UC-Logic and Huion tablets. + Support for UC-Logic and Huion tablets. config HID_WALTOP tristate "Waltop" help - Support for Waltop tablets. + Support for Waltop tablets. config HID_VIEWSONIC tristate "ViewSonic/Signotec" @@ -530,11 +530,11 @@ config HID_VRC2 tristate "VRC-2 Car Controller" depends on HID help - Support for VRC-2 which is a 2-axis controller often used in - car simulators. + Support for VRC-2 which is a 2-axis controller often used in + car simulators. - To compile this driver as a module, choose M here: the - module will be called hid-vrc2. + To compile this driver as a module, choose M here: the + module will be called hid-vrc2. config HID_XIAOMI tristate "Xiaomi" @@ -545,95 +545,95 @@ config HID_XIAOMI config HID_GYRATION tristate "Gyration remote control" help - Support for Gyration remote control. + Support for Gyration remote control. config HID_ICADE tristate "ION iCade arcade controller" help - Support for the ION iCade arcade controller to work as a joystick. + Support for the ION iCade arcade controller to work as a joystick. - To compile this driver as a module, choose M here: the - module will be called hid-icade. + To compile this driver as a module, choose M here: the + module will be called hid-icade. config HID_ITE tristate "ITE devices" help - Support for ITE devices not fully compliant with HID standard. + Support for ITE devices not fully compliant with HID standard. config HID_JABRA tristate "Jabra USB HID Driver" help - Support for Jabra USB HID devices. + Support for Jabra USB HID devices. - Prevents mapping of vendor defined HID usages to input events. Without - this driver HID reports from Jabra devices may incorrectly be seen as - mouse button events. - Say M here if you may ever plug in a Jabra USB device. + Prevents mapping of vendor defined HID usages to input events. Without + this driver HID reports from Jabra devices may incorrectly be seen as + mouse button events. + Say M here if you may ever plug in a Jabra USB device. config HID_TWINHAN tristate "Twinhan IR remote control" help - Support for Twinhan IR remote control. + Support for Twinhan IR remote control. config HID_KENSINGTON tristate "Kensington Slimblade Trackball" help - Support for Kensington Slimblade Trackball. + Support for Kensington Slimblade Trackball. config HID_LCPOWER tristate "LC-Power" help - Support for LC-Power RC1000MCE RF remote control. + Support for LC-Power RC1000MCE RF remote control. config HID_LED tristate "Simple RGB LED support" depends on LEDS_CLASS help - Support for simple RGB LED devices. Currently supported are: - - Riso Kagaku Webmail Notifier - - Dream Cheeky Webmail Notifier and Friends Alert - - ThingM blink(1) - - Delcom Visual Signal Indicator Generation 2 - - Greynut Luxafor + Support for simple RGB LED devices. Currently supported are: + - Riso Kagaku Webmail Notifier + - Dream Cheeky Webmail Notifier and Friends Alert + - ThingM blink(1) + - Delcom Visual Signal Indicator Generation 2 + - Greynut Luxafor - To compile this driver as a module, choose M here: the - module will be called hid-led. + To compile this driver as a module, choose M here: the + module will be called hid-led. config HID_LENOVO tristate "Lenovo / Thinkpad devices" depends on LEDS_CLASS help - Support for IBM/Lenovo devices that are not fully compliant with HID standard. + Support for IBM/Lenovo devices that are not fully compliant with HID standard. - Say Y if you want support for horizontal scrolling of the IBM/Lenovo - Scrollpoint mice or the non-compliant features of the Lenovo Thinkpad - standalone keyboards, e.g: - - ThinkPad USB Keyboard with TrackPoint (supports extra LEDs and trackpoint - configuration) - - ThinkPad Compact Bluetooth Keyboard with TrackPoint (supports Fn keys) - - ThinkPad Compact USB Keyboard with TrackPoint (supports Fn keys) + Say Y if you want support for horizontal scrolling of the IBM/Lenovo + Scrollpoint mice or the non-compliant features of the Lenovo Thinkpad + standalone keyboards, e.g: + - ThinkPad USB Keyboard with TrackPoint (supports extra LEDs and trackpoint + configuration) + - ThinkPad Compact Bluetooth Keyboard with TrackPoint (supports Fn keys) + - ThinkPad Compact USB Keyboard with TrackPoint (supports Fn keys) config HID_LENOVO_GO tristate "HID Driver for Lenovo Legion Go Series Controllers" depends on USB_HID depends on LEDS_CLASS_MULTICOLOR help - Support for Lenovo Legion Go devices with detachable controllers. + Support for Lenovo Legion Go devices with detachable controllers. - Say Y here to include configuration interface support for the Lenovo Legion Go - and Legion Go 2 Handheld Console Controllers. Say M here to compile this - driver as a module. The module will be called hid-lenovo-go. + Say Y here to include configuration interface support for the Lenovo Legion Go + and Legion Go 2 Handheld Console Controllers. Say M here to compile this + driver as a module. The module will be called hid-lenovo-go. config HID_LENOVO_GO_S tristate "HID Driver for Lenovo Legion Go S Controller" depends on USB_HID depends on LEDS_CLASS_MULTICOLOR help - Support for Lenovo Legion Go S Handheld Console Controller. + Support for Lenovo Legion Go S Handheld Console Controller. - Say Y here to include configuration interface support for the Lenovo Legion Go - S. Say M here to compile this driver as a module. The module will be called - hid-lenovo-go-s. + Say Y here to include configuration interface support for the Lenovo Legion Go + S. Say M here to compile this driver as a module. The module will be called + hid-lenovo-go-s. config HID_LETSKETCH tristate "Letsketch WP9620N tablets" @@ -655,7 +655,7 @@ config HID_LOGITECH depends on LEDS_CLASS depends on LEDS_CLASS_MULTICOLOR help - Support for Logitech devices that are not fully compliant with HID standard. + Support for Logitech devices that are not fully compliant with HID standard. config HID_LOGITECH_DJ tristate "Logitech receivers full support" @@ -664,23 +664,23 @@ config HID_LOGITECH_DJ depends on HID_LOGITECH select HID_LOGITECH_HIDPP help - Say Y if you want support for Logitech receivers and devices. - Logitech receivers are capable of pairing multiple Logitech compliant - devices to the same receiver. Without this driver it will be handled by - generic USB_HID driver and all incoming events will be multiplexed - into a single mouse and a single keyboard device. + Say Y if you want support for Logitech receivers and devices. + Logitech receivers are capable of pairing multiple Logitech compliant + devices to the same receiver. Without this driver it will be handled by + generic USB_HID driver and all incoming events will be multiplexed + into a single mouse and a single keyboard device. config HID_LOGITECH_HIDPP tristate "Logitech HID++ devices support" depends on HID_LOGITECH select POWER_SUPPLY help - Support for Logitech devices relying on the HID++ Logitech specification + Support for Logitech devices relying on the HID++ Logitech specification - Say Y if you want support for Logitech devices relying on the HID++ - specification. Such devices are the various Logitech Touchpads (T650, - T651, TK820), some mice (Zone Touch mouse), or even keyboards (Solar - Keyboard). + Say Y if you want support for Logitech devices relying on the HID++ + specification. Such devices are the various Logitech Touchpads (T650, + T651, TK820), some mice (Zone Touch mouse), or even keyboards (Solar + Keyboard). config LOGITECH_FF bool "Logitech force feedback support" @@ -740,31 +740,31 @@ config LOGIWHEELS_FF config HID_MAGICMOUSE tristate "Apple Magic Mouse/Trackpad multi-touch support" help - Support for the Apple Magic Mouse/Trackpad multi-touch. + Support for the Apple Magic Mouse/Trackpad multi-touch. - Say Y here if you want support for the multi-touch features of the - Apple Wireless "Magic" Mouse and the Apple Wireless "Magic" Trackpad. + Say Y here if you want support for the multi-touch features of the + Apple Wireless "Magic" Mouse and the Apple Wireless "Magic" Trackpad. config HID_MALTRON tristate "Maltron L90 keyboard" help - Adds support for the volume up, volume down, mute, and play/pause buttons - of the Maltron L90 keyboard. + Adds support for the volume up, volume down, mute, and play/pause buttons + of the Maltron L90 keyboard. config HID_MAYFLASH tristate "Mayflash game controller adapter force feedback" select INPUT_FF_MEMLESS help - Say Y here if you have HJZ Mayflash PS3 game controller adapters - and want to enable force feedback support. + Say Y here if you have HJZ Mayflash PS3 game controller adapters + and want to enable force feedback support. config HID_MEGAWORLD_FF tristate "Mega World based game controller force feedback support" depends on USB_HID select INPUT_FF_MEMLESS help - Say Y here if you have a Mega World based game controller and want - to have force feedback support for it. + Say Y here if you have a Mega World based game controller and want + to have force feedback support for it. config HID_RAKK tristate "Rakk support" @@ -778,18 +778,18 @@ config HID_RAKK config HID_REDRAGON tristate "Redragon keyboards" help - Support for Redragon keyboards that need fix-ups to work properly. + Support for Redragon keyboards that need fix-ups to work properly. config HID_MICROSOFT tristate "Microsoft non-fully HID-compliant devices" select INPUT_FF_MEMLESS help - Support for Microsoft devices that are not fully compliant with HID standard. + Support for Microsoft devices that are not fully compliant with HID standard. config HID_MONTEREY tristate "Monterey Genius KB29E keyboard" help - Support for Monterey Genius KB29E. + Support for Monterey Genius KB29E. config HID_MULTITOUCH tristate "HID Multitouch panels" @@ -843,35 +843,35 @@ config HID_NINTENDO depends on LEDS_CLASS select POWER_SUPPLY help - Adds support for the Nintendo Switch Joy-Cons, NSO, Pro Controller. - All controllers support bluetooth, and the Pro Controller also supports - its USB mode. This also includes support for the Nintendo Switch Online - Controllers which include the NES, Genesis, SNES, and N64 controllers. + Adds support for the Nintendo Switch Joy-Cons, NSO, Pro Controller. + All controllers support bluetooth, and the Pro Controller also supports + its USB mode. This also includes support for the Nintendo Switch Online + Controllers which include the NES, Genesis, SNES, and N64 controllers. - To compile this driver as a module, choose M here: the - module will be called hid-nintendo. + To compile this driver as a module, choose M here: the + module will be called hid-nintendo. config NINTENDO_FF bool "Nintendo Switch controller force feedback support" depends on HID_NINTENDO select INPUT_FF_MEMLESS help - Say Y here if you have a Nintendo Switch controller and want to enable - force feedback support for it. This works for both joy-cons, the pro - controller, and the NSO N64 controller. For the pro controller, both - rumble motors can be controlled individually. + Say Y here if you have a Nintendo Switch controller and want to enable + force feedback support for it. This works for both joy-cons, the pro + controller, and the NSO N64 controller. For the pro controller, both + rumble motors can be controlled individually. config HID_NTI tristate "NTI keyboard adapters" help - Support for the "extra" Sun keyboard keys on keyboards attached - through Network Technologies USB-SUN keyboard adapters. + Support for the "extra" Sun keyboard keys on keyboards attached + through Network Technologies USB-SUN keyboard adapters. config HID_NTRIG tristate "N-Trig touch screen" depends on USB_HID help - Support for N-Trig touch screen. + Support for N-Trig touch screen. config HID_NVIDIA_SHIELD tristate "NVIDIA SHIELD devices" @@ -896,14 +896,14 @@ config NVIDIA_SHIELD_FF config HID_ORTEK tristate "Ortek PKB-1700/WKB-2000/Skycable wireless keyboard and mouse trackpad" help - There are certain devices which have LogicalMaximum wrong in the keyboard - usage page of their report descriptor. The most prevailing ones so far - are manufactured by Ortek, thus the name of the driver. Currently - supported devices by this driver are + There are certain devices which have LogicalMaximum wrong in the keyboard + usage page of their report descriptor. The most prevailing ones so far + are manufactured by Ortek, thus the name of the driver. Currently + supported devices by this driver are - - Ortek PKB-1700 - - Ortek WKB-2000 - - Skycable wireless presenter + - Ortek PKB-1700 + - Ortek WKB-2000 + - Skycable wireless presenter config HID_OXP tristate "OneXPlayer handheld controller configuration support" @@ -946,7 +946,7 @@ config HID_PENMOUNT config HID_PETALYNX tristate "Petalynx Maxter remote control" help - Support for Petalynx Maxter remote control. + Support for Petalynx Maxter remote control. config HID_PICOLCD tristate "PicoLCD (graphic version)" @@ -1038,77 +1038,77 @@ config PLAYSTATION_FF PlayStation game controllers. config HID_PXRC - tristate "PhoenixRC HID Flight Controller" - depends on HID - help - Support for PhoenixRC HID Flight Controller, a 8-axis flight controller. + tristate "PhoenixRC HID Flight Controller" + depends on HID + help + Support for PhoenixRC HID Flight Controller, a 8-axis flight controller. - To compile this driver as a module, choose M here: the - module will be called hid-pxrc. + To compile this driver as a module, choose M here: the + module will be called hid-pxrc. config HID_RAPOO tristate "Rapoo non-fully HID-compliant devices" help - Support for Rapoo devices that are not fully compliant with the - HID standard. + Support for Rapoo devices that are not fully compliant with the + HID standard. config HID_RAZER tristate "Razer non-fully HID-compliant devices" help - Support for Razer devices that are not fully compliant with the - HID standard. + Support for Razer devices that are not fully compliant with the + HID standard. config HID_PRIMAX tristate "Primax non-fully HID-compliant devices" help - Support for Primax devices that are not fully compliant with the - HID standard. + Support for Primax devices that are not fully compliant with the + HID standard. config HID_RETRODE tristate "Retrode 2 USB adapter for vintage video games" depends on USB_HID help - Support for - * Retrode 2 cartridge and controller adapter + Support for + * Retrode 2 cartridge and controller adapter config HID_ROCCAT tristate "Roccat device support" depends on USB_HID help - Support for Roccat devices. - Say Y here if you have a Roccat mouse or keyboard and want - support for its special functionalities. + Support for Roccat devices. + Say Y here if you have a Roccat mouse or keyboard and want + support for its special functionalities. config HID_SAITEK tristate "Saitek (Mad Catz) non-fully HID-compliant devices" help - Support for Saitek devices that are not fully compliant with the - HID standard. + Support for Saitek devices that are not fully compliant with the + HID standard. - Supported devices: - - PS1000 Dual Analog Pad - - Saitek R.A.T.7, R.A.T.9, M.M.O.7 Gaming Mice - - Mad Catz R.A.T.5, R.A.T.9 Gaming Mice + Supported devices: + - PS1000 Dual Analog Pad + - Saitek R.A.T.7, R.A.T.9, M.M.O.7 Gaming Mice + - Mad Catz R.A.T.5, R.A.T.9 Gaming Mice config HID_SAMSUNG tristate "Samsung InfraRed remote control or keyboards" depends on USB_HID help - Support for Samsung InfraRed remote control or keyboards. + Support for Samsung InfraRed remote control or keyboards. config HID_SEMITEK tristate "Semitek USB keyboards" help - Support for Semitek USB keyboards that are not fully compliant - with the HID standard. + Support for Semitek USB keyboards that are not fully compliant + with the HID standard. - There are many variants, including: - - GK61, GK64, GK68, GK84, GK96, etc. - - SK61, SK64, SK68, SK84, SK96, etc. - - Dierya DK61/DK66 - - Tronsmart TK09R - - Woo-dy - - X-Bows Nature/Knight + There are many variants, including: + - GK61, GK64, GK68, GK84, GK96, etc. + - SK61, SK64, SK68, SK84, SK96, etc. + - Dierya DK61/DK66 + - Tronsmart TK09R + - Woo-dy + - X-Bows Nature/Knight config HID_SIGMAMICRO tristate "SiGma Micro-based keyboards" @@ -1128,58 +1128,58 @@ config HID_SONY select POWER_SUPPLY select CRC32 help - Support for + Support for - * Sixaxis controllers for PS3 - * Buzz controllers - * Blu-ray Disc Remote Control for PS3 - * Logitech Harmony adapter for PS3 - * Guitar Hero Live PS3, Wii U and PS4 guitars - * Guitar Hero PS3 and PC guitars - * Rock Band 1, 2 and 3 PS3 and Wii instruments - * Rock Band 4 PS4 and PS5 guitars - * DJ Hero Turntable for PS3 + * Sixaxis controllers for PS3 + * Buzz controllers + * Blu-ray Disc Remote Control for PS3 + * Logitech Harmony adapter for PS3 + * Guitar Hero Live PS3, Wii U and PS4 guitars + * Guitar Hero PS3 and PC guitars + * Rock Band 1, 2 and 3 PS3 and Wii instruments + * Rock Band 4 PS4 and PS5 guitars + * DJ Hero Turntable for PS3 config SONY_FF bool "Sony PS2/3/4 accessories force feedback support" depends on HID_SONY select INPUT_FF_MEMLESS help - Say Y here if you have a Sony PS2/3/4 accessory and want to enable - force feedback support for it. + Say Y here if you have a Sony PS2/3/4 accessory and want to enable + force feedback support for it. config HID_SPEEDLINK tristate "Speedlink VAD Cezanne mouse support" help - Support for Speedlink Vicious and Divine Cezanne mouse. + Support for Speedlink Vicious and Divine Cezanne mouse. config HID_STEAM tristate "Steam Controller/Deck support" select POWER_SUPPLY help - Say Y here if you have a Steam Controller or Deck if you want to use it - without running the Steam Client. It supports both the wired and - the wireless adaptor. + Say Y here if you have a Steam Controller or Deck if you want to use it + without running the Steam Client. It supports both the wired and + the wireless adaptor. config STEAM_FF bool "Steam Deck force feedback support" depends on HID_STEAM select INPUT_FF_MEMLESS help - Say Y here if you want to enable force feedback support for the Steam - Deck. + Say Y here if you want to enable force feedback support for the Steam + Deck. config HID_STEELSERIES tristate "Steelseries devices support" depends on USB_HID help - Support for Steelseries SRW-S1 steering wheel, and the Steelseries - Arctis 1 Wireless for XBox headset. + Support for Steelseries SRW-S1 steering wheel, and the Steelseries + Arctis 1 Wireless for XBox headset. config HID_SUNPLUS tristate "Sunplus wireless desktop" help - Support for Sunplus wireless desktop. + Support for Sunplus wireless desktop. config HID_RMI tristate "Synaptics RMI4 device support" @@ -1190,9 +1190,9 @@ config HID_RMI select RMI4_F30 select RMI4_F3A help - Support for Synaptics RMI4 touchpads. - Say Y here if you have a Synaptics RMI4 touchpads over i2c-hid or usbhid - and want support for its special functionalities. + Support for Synaptics RMI4 touchpads. + Say Y here if you have a Synaptics RMI4 touchpads over i2c-hid or usbhid + and want support for its special functionalities. config HID_GREENASIA tristate "GreenAsia (Product ID 0x12) game controller support" @@ -1205,59 +1205,59 @@ config GREENASIA_FF depends on HID_GREENASIA select INPUT_FF_MEMLESS help - Say Y here if you have a GreenAsia (Product ID 0x12) based game controller - (like MANTA Warrior MM816 and SpeedLink Strike2 SL-6635) or adapter - and want to enable force feedback support for it. + Say Y here if you have a GreenAsia (Product ID 0x12) based game controller + (like MANTA Warrior MM816 and SpeedLink Strike2 SL-6635) or adapter + and want to enable force feedback support for it. config HID_HYPERV_MOUSE tristate "Microsoft Hyper-V mouse driver" depends on HYPERV_VMBUS help - Select this option to enable the Hyper-V mouse driver. + Select this option to enable the Hyper-V mouse driver. config HID_SMARTJOYPLUS tristate "SmartJoy PLUS PS2/USB adapter support" help - Support for SmartJoy PLUS PS2/USB adapter, Super Dual Box, - Super Joy Box 3 Pro, Super Dual Box Pro, and Super Joy Box 5 Pro. + Support for SmartJoy PLUS PS2/USB adapter, Super Dual Box, + Super Joy Box 3 Pro, Super Dual Box Pro, and Super Joy Box 5 Pro. - Note that DDR (Dance Dance Revolution) mode is not supported, nor - is pressure sensitive buttons on the pro models. + Note that DDR (Dance Dance Revolution) mode is not supported, nor + is pressure sensitive buttons on the pro models. config SMARTJOYPLUS_FF bool "SmartJoy PLUS PS2/USB adapter force feedback support" depends on HID_SMARTJOYPLUS select INPUT_FF_MEMLESS help - Say Y here if you have a SmartJoy PLUS PS2/USB adapter and want to - enable force feedback support for it. + Say Y here if you have a SmartJoy PLUS PS2/USB adapter and want to + enable force feedback support for it. config HID_TIVO tristate "TiVo Slide Bluetooth remote control support" help - Say Y if you have a TiVo Slide Bluetooth remote control. + Say Y if you have a TiVo Slide Bluetooth remote control. config HID_TOPSEED tristate "TopSeed Cyberlink, BTC Emprex, Conceptronic remote control support" help - Say Y if you have a TopSeed Cyberlink or BTC Emprex or Conceptronic - CLLRCMCE remote control. + Say Y if you have a TopSeed Cyberlink or BTC Emprex or Conceptronic + CLLRCMCE remote control. config HID_TOPRE tristate "Topre REALFORCE keyboards" depends on HID help Say Y for N-key rollover support on Topre REALFORCE R2 108/87 key and - Topre REALFORCE R3S 87 key keyboards. + Topre REALFORCE R3S 87 key keyboards. config HID_THINGM tristate "ThingM blink(1) USB RGB LED" depends on LEDS_CLASS select HID_LED help - Support for the ThingM blink(1) USB RGB LED. This driver has been - merged into the generic hid led driver. Config symbol HID_THINGM - just selects HID_LED and will be removed soon. + Support for the ThingM blink(1) USB RGB LED. This driver has been + merged into the generic hid led driver. Config symbol HID_THINGM + just selects HID_LED and will be removed soon. config HID_THRUSTMASTER tristate "ThrustMaster devices support" @@ -1332,23 +1332,23 @@ config HID_WIIMOTE select POWER_SUPPLY select INPUT_FF_MEMLESS help - Support for Nintendo Wii and Wii U Bluetooth peripherals. Supported - devices are the Wii Remote and its extension devices, but also devices - based on the Wii Remote like the Wii U Pro Controller or the - Wii Balance Board. + Support for Nintendo Wii and Wii U Bluetooth peripherals. Supported + devices are the Wii Remote and its extension devices, but also devices + based on the Wii Remote like the Wii U Pro Controller or the + Wii Balance Board. - Support for all official Nintendo extensions is available, however, 3rd - party extensions might not be supported. Please report these devices to: + Support for all official Nintendo extensions is available, however, 3rd + party extensions might not be supported. Please report these devices to: http://github.com/dvdhrm/xwiimote/issues - Other Nintendo Wii U peripherals that are IEEE 802.11 based (including - the Wii U Gamepad) might be supported in the future. But currently - support is limited to Bluetooth based devices. + Other Nintendo Wii U peripherals that are IEEE 802.11 based (including + the Wii U Gamepad) might be supported in the future. But currently + support is limited to Bluetooth based devices. - If unsure, say N. + If unsure, say N. - To compile this driver as a module, choose M here: the - module will be called hid-wiimote. + To compile this driver as a module, choose M here: the + module will be called hid-wiimote. config HID_WINWING tristate "WinWing Orion2 throttle support" @@ -1371,9 +1371,9 @@ config HID_WINWING config HID_XINMO tristate "Xin-Mo non-fully compliant devices" help - Support for Xin-Mo devices that are not fully compliant with the HID - standard. Currently only supports the Xin-Mo Dual Arcade. Say Y here - if you have a Xin-Mo Dual Arcade controller. + Support for Xin-Mo devices that are not fully compliant with the HID + standard. Currently only supports the Xin-Mo Dual Arcade. Say Y here + if you have a Xin-Mo Dual Arcade controller. config HID_ZEROPLUS tristate "Zeroplus based game controller support" @@ -1391,7 +1391,7 @@ config ZEROPLUS_FF config HID_ZYDACRON tristate "Zydacron remote control support" help - Support for Zydacron remote control. + Support for Zydacron remote control. config HID_SENSOR_HUB tristate "HID Sensors framework support" @@ -1425,9 +1425,9 @@ config HID_SENSOR_CUSTOM_SENSOR config HID_ALPS tristate "Alps HID device support" help - Support for Alps I2C HID touchpads and StickPointer. - Say Y here if you have a Alps touchpads over i2c-hid or usbhid - and want support for its special functionalities. + Support for Alps I2C HID touchpads and StickPointer. + Say Y here if you have a Alps touchpads over i2c-hid or usbhid + and want support for its special functionalities. config HID_MCP2200 tristate "Microchip MCP2200 HID USB-to-GPIO bridge" @@ -1444,11 +1444,11 @@ config HID_MCP2221 imply GPIOLIB imply IIO help - Provides I2C and SMBUS host adapter functionality over USB-HID - through MCP2221 device. + Provides I2C and SMBUS host adapter functionality over USB-HID + through MCP2221 device. - To compile this driver as a module, choose M here: the module - will be called hid-mcp2221.ko. + To compile this driver as a module, choose M here: the module + will be called hid-mcp2221.ko. config HID_KUNIT_TEST tristate "KUnit tests for HID" if !KUNIT_ALL_TESTS -- 2.54.0