From: Ibrahim Hashimov <security@auditcode.ai>
To: ping.cheng@wacom.com, jason.gerecke@wacom.com, jikos@kernel.org,
bentiss@kernel.org
Cc: dmitry.torokhov@gmail.com, linux-input@vger.kernel.org,
linux-kernel@vger.kernel.org, stable@vger.kernel.org
Subject: [PATCH v2] HID: wacom: validate report length in wacom_intuos_pro2_bt_irq
Date: Mon, 13 Jul 2026 11:34:14 +0200 [thread overview]
Message-ID: <20260713093414.94337-1-security@auditcode.ai> (raw)
In-Reply-To: <20260713075110.92469-1-security@auditcode.ai>
wacom_intuos_pro2_bt_irq() receives the wire report length in `len`
but never consults it before parsing. After the report-id gate it
unconditionally calls wacom_intuos_pro2_bt_pen() and then, selected by
features.type, a fixed chain of sub-parsers, none of which receive
`len`:
wacom_intuos_pro2_bt_pen(wacom);
if (type == INTUOSP2_BT || type == INTUOSP2S_BT) {
wacom_intuos_pro2_bt_touch(wacom);
wacom_intuos_pro2_bt_pad(wacom);
wacom_intuos_pro2_bt_battery(wacom);
} else {
wacom_intuos_gen3_bt_pad(wacom);
wacom_intuos_gen3_bt_battery(wacom);
}
Each sub-parser dereferences wacom->data at fixed offsets. The furthest
byte touched on each branch is:
INTUOSP2_BT / INTUOSP2S_BT: wacom_intuos_pro2_bt_pad() reads data[285]
(the touchring byte), so the report must be at least 286 bytes;
INTUOSHT3_BT ("gen3"): wacom_intuos_gen3_bt_battery() reads data[45],
so the report must be at least 46 bytes.
features.type is selected from the VID/PID id_table entry and
wacom_setup_device_quirks() force-registers the pen/pad/touch inputs
for that type independent of the report descriptor, so a malicious or
malfunctioning paired/spoofed Bluetooth peripheral can advertise that
VID/PID and send an undersized report that still satisfies the
data[0] == 0x80/0x81 gate. The driver then reads past the received
report and forwards the bytes to userspace via evdev (MSC_SERIAL /
ABS_MISC / ABS_WHEEL on the pen and pad input nodes), an out-of-bounds
read with a concrete userspace read-back channel, and a true
out-of-bounds read on transports whose backing buffer is sized to the
(small) report descriptor rather than a fixed-size staging buffer.
This is the same class of bug commit 2f1763f62909 ("HID: wacom: fix
out-of-bounds read in wacom_intuos_bt_irq") already hardened in the
sibling wacom_intuos_bt_irq(), which guards each report id against its
minimum length before parsing.
Guard wacom_intuos_pro2_bt_irq() the same way: before parsing, reject
reports shorter than the furthest offset the selected branch actually
dereferences, warn, and bail out. Because the whole pen/touch/pad/
battery chain runs unconditionally per branch, a single up-front check
against the maximum offset (286 bytes for INTUOSP2_BT/INTUOSP2S_BT,
46 bytes for the gen3 branch) bounds every sub-parser. Returning 0 on
a short report also skips those calls for the same malformed report,
which is the safe, conservative behavior.
Fixes: 4922cd26f03c ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface")
Cc: stable@vger.kernel.org
Signed-off-by: Ibrahim Hashimov <security@auditcode.ai>
Assisted-by: AuditCode-AI:2026.07
---
v2: the v1 check (len < 109 / len < 43) only bounded
wacom_intuos_pro2_bt_pen(). As sashiko-bot pointed out, the
unconditional touch/pad/battery calls read much further --
wacom_intuos_pro2_bt_pad() up to data[285] and
wacom_intuos_gen3_bt_battery() up to data[45] -- so a report in the
gap (109..285 / 43..45) passed the guard yet still over-read. Raise
the minimums to the furthest offset each branch dereferences
(286 / 46) so the guard actually bounds the whole call chain.
drivers/hid/wacom_wac.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index da1f0ea85625..89a191cf1924 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -1548,6 +1548,19 @@ static int wacom_intuos_pro2_bt_irq(struct wacom_wac *wacom, size_t len)
return 0;
}
+ if (wacom->features.type == INTUOSP2_BT ||
+ wacom->features.type == INTUOSP2S_BT) {
+ if (len < 286) {
+ dev_warn(wacom->pen_input->dev.parent,
+ "Pro2 BT report too short: %zu bytes\n", len);
+ return 0;
+ }
+ } else if (len < 46) {
+ dev_warn(wacom->pen_input->dev.parent,
+ "Pro2 BT report too short: %zu bytes\n", len);
+ return 0;
+ }
+
wacom_intuos_pro2_bt_pen(wacom);
if (wacom->features.type == INTUOSP2_BT ||
wacom->features.type == INTUOSP2S_BT) {
--
2.50.1 (Apple Git-155)
next prev parent reply other threads:[~2026-07-13 9:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-13 7:51 [PATCH] HID: wacom: validate report length before Intuos Pro2 BT pen parse Ibrahim Hashimov
2026-07-13 8:01 ` sashiko-bot
2026-07-13 9:34 ` Ibrahim Hashimov [this message]
2026-07-13 10:11 ` [PATCH v2] HID: wacom: validate report length in wacom_intuos_pro2_bt_irq sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260713093414.94337-1-security@auditcode.ai \
--to=security@auditcode.ai \
--cc=bentiss@kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=jason.gerecke@wacom.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ping.cheng@wacom.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox