Linux Input/HID development
 help / color / mirror / Atom feed
From: Lee Jones <lee@kernel.org>
To: Ping Cheng <ping.cheng@wacom.com>,
	Jason Gerecke <jason.gerecke@wacom.com>,
	Jiri Kosina <jikos@kernel.org>,
	Benjamin Tissoires <bentiss@kernel.org>,
	Aaron Skomra <aaron.skomra@wacom.com>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Peter Hutterer <peter.hutterer@who-t.net>,
	linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v6 1/4] HID: wacom: Advertise SW_MUTE_DEVICE capability prior to registration
Date: Mon, 20 Jul 2026 13:21:56 +0100	[thread overview]
Message-ID: <20260720122156.GA11805@google.com> (raw)
In-Reply-To: <20260716090726.2711293-1-lee@kernel.org>

Is Jason back in this week?

Note that all of the Sashiko review comments are pre-existing issues.

> Input subsystem guidelines require that device capabilities are advertised
> before the input device is registered.  The Wacom driver was violating
> this by advertising the SW_MUTE_DEVICE capability post-registration in
> wacom_set_shared_values() (and duplicating it in device-specific setup
> cases).
> 
> Resolve this by moving the SW_MUTE_DEVICE capability setup to
> wacom_setup_touch_input_capabilities() for all touch devices that support
> it, excluding TabletPC devices.
> 
> Additionally, replace the lookup-dependent
> 'wacom_wac->shared->touch->product' references with 'hdev->product'
> inside wacom_setup_touch_input_capabilities() as 'hdev' is already
> available and represents the touch device itself.
> 
> Fixes: d2ec58aee8b1 ("HID: wacom: generic: support generic touch switch")
> Signed-off-by: Lee Jones <lee@kernel.org>
> ---
> 
> v4 -> v5: New patch used to split out SW_MUTE_DEVICE as per Jason's request
> v5 -> v6: Unconditionally advertise SW_MUTE_DEVICE on generic touch devices
> 
>  drivers/hid/wacom_sys.c |  6 ------
>  drivers/hid/wacom_wac.c | 19 +++++++++++--------
>  2 files changed, 11 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
> index 0eafa483b7f7..6c2a3ddfe366 100644
> --- a/drivers/hid/wacom_sys.c
> +++ b/drivers/hid/wacom_sys.c
> @@ -2359,12 +2359,6 @@ static void wacom_set_shared_values(struct wacom_wac *wacom_wac)
>  			wacom_wac->shared->is_touch_on = true;
>  	}
>  
> -	if (wacom_wac->shared->has_mute_touch_switch &&
> -	    wacom_wac->shared->touch_input) {
> -		set_bit(EV_SW, wacom_wac->shared->touch_input->evbit);
> -		input_set_capability(wacom_wac->shared->touch_input, EV_SW,
> -				     SW_MUTE_DEVICE);
> -	}
>  }
>  
>  static int wacom_parse_and_register(struct wacom *wacom, bool wireless)
> diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
> index a29bf051ada7..32c4fd03479e 100644
> --- a/drivers/hid/wacom_wac.c
> +++ b/drivers/hid/wacom_wac.c
> @@ -3953,6 +3953,8 @@ int wacom_setup_pen_input_capabilities(struct input_dev *input_dev,
>  int wacom_setup_touch_input_capabilities(struct input_dev *input_dev,
>  					 struct wacom_wac *wacom_wac)
>  {
> +	struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
> +	struct hid_device *hdev = wacom->hdev;
>  	struct wacom_features *features = &wacom_wac->features;
>  
>  	if (!(features->device_type & WACOM_DEVICETYPE_TOUCH))
> @@ -3963,9 +3965,12 @@ int wacom_setup_touch_input_capabilities(struct input_dev *input_dev,
>  	else
>  		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
>  
> -	if (features->type == HID_GENERIC)
> +	if (features->type == HID_GENERIC) {
> +		input_dev->evbit[0] |= BIT_MASK(EV_SW);
> +		__set_bit(SW_MUTE_DEVICE, input_dev->swbit);
>  		/* setup has already been done */
>  		return 0;
> +	}
>  
>  	input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
>  	__set_bit(BTN_TOUCH, input_dev->keybit);
> @@ -3997,19 +4002,17 @@ int wacom_setup_touch_input_capabilities(struct input_dev *input_dev,
>  		input_dev->evbit[0] |= BIT_MASK(EV_SW);
>  		__set_bit(SW_MUTE_DEVICE, input_dev->swbit);
>  
> -		if (wacom_wac->shared->touch->product == 0x361) {
> +		if (hdev->product == 0x361) {
>  			input_set_abs_params(input_dev, ABS_MT_POSITION_X,
>  					     0, 12440, 4, 0);
>  			input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
>  					     0, 8640, 4, 0);
> -		}
> -		else if (wacom_wac->shared->touch->product == 0x360) {
> +		} else if (hdev->product == 0x360) {
>  			input_set_abs_params(input_dev, ABS_MT_POSITION_X,
>  					     0, 8960, 4, 0);
>  			input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
>  					     0, 5920, 4, 0);
> -		}
> -		else if (wacom_wac->shared->touch->product == 0x393) {
> +		} else if (hdev->product == 0x393) {
>  			input_set_abs_params(input_dev, ABS_MT_POSITION_X,
>  					     0, 6400, 4, 0);
>  			input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
> @@ -4039,8 +4042,8 @@ int wacom_setup_touch_input_capabilities(struct input_dev *input_dev,
>  		fallthrough;
>  
>  	case WACOM_27QHDT:
> -		if (wacom_wac->shared->touch->product == 0x32C ||
> -		    wacom_wac->shared->touch->product == 0xF6) {
> +		if (hdev->product == 0x32C ||
> +		    hdev->product == 0xF6) {
>  			input_dev->evbit[0] |= BIT_MASK(EV_SW);
>  			__set_bit(SW_MUTE_DEVICE, input_dev->swbit);
>  			wacom_wac->has_mute_touch_switch = true;
> -- 
> 2.55.0.141.g00534a21ce-goog
> 

-- 
Lee Jones

  parent reply	other threads:[~2026-07-20 12:22 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-16  9:07 [PATCH v6 1/4] HID: wacom: Advertise SW_MUTE_DEVICE capability prior to registration Lee Jones
2026-07-16  9:07 ` [PATCH v6 2/4] HID: wacom: Fix Use-After-Free in wacom_intuos_pad Lee Jones
2026-07-16  9:26   ` sashiko-bot
2026-07-16  9:07 ` [PATCH v6 3/4] HID: wacom: Fix Use-After-Free in wacom_bamboo_pad Lee Jones
2026-07-16  9:20   ` sashiko-bot
2026-07-16  9:07 ` [PATCH v6 4/4] HID: wacom: Redesign shared sibling data lifecycle Lee Jones
2026-07-16  9:17 ` [PATCH v6 1/4] HID: wacom: Advertise SW_MUTE_DEVICE capability prior to registration sashiko-bot
2026-07-20 12:21 ` Lee Jones [this message]
2026-07-21 15:33   ` Jason Gerecke

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260720122156.GA11805@google.com \
    --to=lee@kernel.org \
    --cc=aaron.skomra@wacom.com \
    --cc=bentiss@kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=jason.gerecke@wacom.com \
    --cc=jikos@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peter.hutterer@who-t.net \
    --cc=ping.cheng@wacom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox