From: sashiko-bot@kernel.org
To: "Even Xu" <even.xu@intel.com>
Cc: linux-input@vger.kernel.org, dmitry.torokhov@gmail.com
Subject: Re: [PATCH 2/2] HID: Intel-thc-hid: Intel-quickspi: Use hid_safe_input_report()
Date: Tue, 22 Sep 2026 03:05:21 +0000 [thread overview]
Message-ID: <20260922030521.C9CAA1F000FF@smtp.kernel.org> (raw)
In-Reply-To: <20260922025437.940072-3-even.xu@intel.com>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] hid: intel-thc-hid: heap OOB write and report rejection due to incorrect buf_size
--
commit 89b3a4008ccfc5430514595b9a4bdb1131455535
Author: Even Xu <even.xu@intel.com>
HID: Intel-thc-hid: Intel-quickspi: Use hid_safe_input_report()
Replace the deprecated hid_input_report() with
hid_safe_input_report(), which takes the allocated size of the input
report buffer and allows hid-core to validate the reported data length
against the actual buffer size.
Track the allocated size of qsdev->input_buf in the new input_len
field and pass it through quickspi_hid_send_report() to
hid_safe_input_report() to prevent potential out-of-bounds reads.
> diff --git a/drivers/hid/intel-thc-hid/intel-quickspi/quickspi-protocol.c b/drivers/hid/intel-thc-hid/intel-quickspi/quickspi-protocol.c
> index 847c5ec55569a..0df33c44fbffe 100644
> --- a/drivers/hid/intel-thc-hid/intel-quickspi/quickspi-protocol.c
> +++ b/drivers/hid/intel-thc-hid/intel-quickspi/quickspi-protocol.c
> @@ -240,7 +240,7 @@ void quickspi_handle_input_data(struct quickspi_device *qsdev, u32 buf_len)
> input_len = sizeof(body_hdr->content_id) + input_len;
> input_report = input_body->content - sizeof(body_hdr->content_id);
>
> - ret = quickspi_hid_send_report(qsdev, input_report, input_len);
> + ret = quickspi_hid_send_report(qsdev, input_report, qsdev->input_len, input_len);
[Severity: High]
Does passing qsdev->input_len as the buf_size here overstate the available
buffer space?
In quickspi_handle_input_data(), input_report is calculated as an offset into
the allocated buffer:
input_report = input_body->content - sizeof(body_hdr->content_id);
This offsets the pointer by 3 bytes into the qsdev->input_buf allocation.
However, qsdev->input_len represents the total allocation size, not the
remaining space from the input_report pointer.
When this overstated size reaches hid_safe_input_report(), if a short report
requires padding, hid_report_raw_event() in the HID core could write up to
3 bytes past the end of the qsdev->input_buf allocation via memset(), causing
a heap out-of-bounds write.
Additionally, if a maximum-sized report is received, the data length will
strictly exceed the stated buf_size, causing the HID core to falsely reject
the report with -EINVAL.
Should the buf_size passed to quickspi_hid_send_report() account for the
offset into the buffer?
--
Sashiko AI review · https://sashiko.dev/#/patchset/20260922025437.940072-1-even.xu@intel.com?part=2
next prev parent reply other threads:[~2026-09-22 3:05 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-22 2:54 [PATCH 0/2] HID: Intel-thc-hid: Use hid_safe_input_report() Even Xu
2026-09-22 2:54 ` [PATCH 1/2] HID: Intel-thc-hid: Intel-quicki2c: " Even Xu
2026-09-22 3:03 ` sashiko-bot
2026-09-22 2:54 ` [PATCH 2/2] HID: Intel-thc-hid: Intel-quickspi: " Even Xu
2026-09-22 3:05 ` sashiko-bot [this message]
2026-09-23 16:50 ` [PATCH 0/2] HID: Intel-thc-hid: " Jiri Kosina
2026-09-23 23:55 ` Xu, Even
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260922030521.C9CAA1F000FF@smtp.kernel.org \
--to=sashiko-bot@kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=even.xu@intel.com \
--cc=linux-input@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox