From: Jinmo Yang <jinmo44.yang@gmail.com>
To: ping.cheng@wacom.com, jason.gerecke@wacom.com, jikos@kernel.org,
bentiss@kernel.org
Cc: dmitry.torokhov@gmail.com, linux-input@vger.kernel.org,
linux-kernel@vger.kernel.org, stable@vger.kernel.org,
jinmo44.yang@gmail.com
Subject: [PATCH v2 2/5] HID: wacom: check the input devices in the legacy irq handlers
Date: Sun, 18 Oct 2026 19:46:14 +0900 [thread overview]
Message-ID: <20261018104617.743771-3-jinmo44.yang@gmail.com> (raw)
In-Reply-To: <20261018104617.743771-1-jinmo44.yang@gmail.com>
wacom_penpartner_irq(), wacom_pl_irq(), wacom_ptu_irq(),
wacom_dtu_irq(), wacom_dtus_irq() and wacom_graphire_irq() dereference
pen_input and, for the latter two, pad_input without checking them.
As described in "HID: wacom: check the input device in the shared
report helpers", a partial interface leaves one or two of the three
input devices NULL on a fully successful probe, and wacom_wac_irq()
still dispatches to these handlers. Seven locations fault, each
reproduced on linux-next 20260925 (x86_64, KASAN) from one /dev/uhid
device plus a single UHID_INPUT2 write.
For wacom_dtus_irq() and wacom_graphire_irq(), all hardware served by
these handlers is expected to have both pen and pad on a single
interface (the one exception is GRAPHIRE, which is pen-only). Rather
than scattering checks per branch, validate the expected input devices
at function entry and bail out early if any are missing.
wacom_dtu_irq() gets a check too. Its only dereference is in a
dev_dbg(), so it does not fault with CONFIG_DYNAMIC_DEBUG=n, but it is
unconditional in the source.
Fixes: 2a6cdbdd4cc0 ("HID: wacom: Introduce new 'touch_input' device")
Fixes: 862cf5535c0c ("HID: wacom: Introduce a new WACOM_DEVICETYPE_PAD device_type")
Cc: stable@vger.kernel.org
Signed-off-by: Jinmo Yang <jinmo44.yang@gmail.com>
---
drivers/hid/wacom_wac.c | 37 +++++++++++++++++++++++++++++++++++++
1 file changed, 37 insertions(+)
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index 567b01882eb1..aa08afb3c5ef 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -128,6 +128,12 @@ static int wacom_penpartner_irq(struct wacom_wac *wacom)
unsigned char *data = wacom->data;
struct input_dev *input = wacom->pen_input;
+ if (!input) {
+ dev_warn_once(&container_of(wacom, struct wacom, wacom_wac)->hdev->dev,
+ "%s: pen_input is NULL\n", __func__);
+ return 0;
+ }
+
switch (data[0]) {
case 1:
if (data[5] & 0x80) {
@@ -174,6 +180,12 @@ static int wacom_pl_irq(struct wacom_wac *wacom)
struct input_dev *input = wacom->pen_input;
int prox, pressure;
+ if (!input) {
+ dev_warn_once(&container_of(wacom, struct wacom, wacom_wac)->hdev->dev,
+ "%s: pen_input is NULL\n", __func__);
+ return 0;
+ }
+
if (data[0] != WACOM_REPORT_PENABLED) {
dev_dbg(input->dev.parent,
"%s: received unknown report #%d\n", __func__, data[0]);
@@ -233,6 +245,12 @@ static int wacom_ptu_irq(struct wacom_wac *wacom)
unsigned char *data = wacom->data;
struct input_dev *input = wacom->pen_input;
+ if (!input) {
+ dev_warn_once(&container_of(wacom, struct wacom, wacom_wac)->hdev->dev,
+ "%s: pen_input is NULL\n", __func__);
+ return 0;
+ }
+
if (data[0] != WACOM_REPORT_PENABLED) {
dev_dbg(input->dev.parent,
"%s: received unknown report #%d\n", __func__, data[0]);
@@ -263,6 +281,12 @@ static int wacom_dtu_irq(struct wacom_wac *wacom)
struct input_dev *input = wacom->pen_input;
int prox = data[1] & 0x20;
+ if (!input) {
+ dev_warn_once(&container_of(wacom, struct wacom, wacom_wac)->hdev->dev,
+ "%s: pen_input is NULL\n", __func__);
+ return 0;
+ }
+
dev_dbg(input->dev.parent,
"%s: received report #%d", __func__, data[0]);
@@ -293,6 +317,13 @@ static int wacom_dtus_irq(struct wacom_wac *wacom)
struct input_dev *input = wacom->pen_input;
unsigned short prox, pressure = 0;
+ if (!input || !wacom->pad_input) {
+ dev_warn_once(&container_of(wacom, struct wacom, wacom_wac)->hdev->dev,
+ "%s: expected pen and pad input devices\n",
+ __func__);
+ return 0;
+ }
+
if (data[0] != WACOM_REPORT_DTUS && data[0] != WACOM_REPORT_DTUSPAD) {
dev_dbg(input->dev.parent,
"%s: received unknown report #%d", __func__, data[0]);
@@ -349,6 +380,12 @@ static int wacom_graphire_irq(struct wacom_wac *wacom)
int rw = 0;
int retval = 0;
+ if (!input || (!pad_input && features->type != GRAPHIRE)) {
+ dev_warn_once(&container_of(wacom, struct wacom, wacom_wac)->hdev->dev,
+ "%s: missing input device(s)\n", __func__);
+ return 0;
+ }
+
if (features->type == GRAPHIRE_BT) {
if (data[0] != WACOM_REPORT_PENABLED_BT) {
dev_dbg(input->dev.parent,
--
2.53.0
next prev parent reply other threads:[~2026-10-18 10:46 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-23 15:01 [PATCH] HID: wacom: fix NULL pointer dereference in wacom_intuos_pad() Jinmo Yang
2026-05-23 15:06 ` [PATCH v2] " Jinmo Yang
2026-05-23 15:50 ` sashiko-bot
2026-05-29 21:44 ` Dmitry Torokhov
2026-06-10 15:48 ` Jiri Kosina
2026-09-26 18:37 ` Jinmo Yang
2026-09-27 4:11 ` [PATCH 0/5] HID: wacom: check input devices in the report handlers Jinmo Yang
2026-09-27 4:11 ` [PATCH 1/5] HID: wacom: check the input device in the shared report helpers Jinmo Yang
2026-10-17 0:05 ` Jason Gerecke
2026-09-27 4:11 ` [PATCH 2/5] HID: wacom: check the input devices in the legacy irq handlers Jinmo Yang
2026-10-17 0:05 ` Jason Gerecke
2026-09-27 4:11 ` [PATCH 3/5] HID: wacom: check the input device in wacom_intuos_pad() Jinmo Yang
2026-09-27 4:24 ` sashiko-bot
2026-10-17 0:05 ` Jason Gerecke
2026-09-27 4:11 ` [PATCH 4/5] HID: wacom: check the input device in wacom_intuos_bt_irq() Jinmo Yang
2026-10-17 0:05 ` Jason Gerecke
2026-09-27 4:11 ` [PATCH 5/5] HID: wacom: check the input devices in the Bamboo handlers Jinmo Yang
2026-10-17 0:05 ` Jason Gerecke
2026-10-16 9:27 ` [PATCH 0/5] HID: wacom: check input devices in the report handlers Jiri Kosina
2026-10-17 0:05 ` Jason Gerecke
2026-10-18 10:46 ` [PATCH v2 0/5] HID: wacom: guard against NULL input devices on successful probe Jinmo Yang
2026-10-18 10:46 ` [PATCH v2 1/5] HID: wacom: check the input device in the shared report helpers Jinmo Yang
2026-10-18 11:00 ` sashiko-bot
2026-10-18 10:46 ` Jinmo Yang [this message]
2026-10-18 10:53 ` [PATCH v2 2/5] HID: wacom: check the input devices in the legacy irq handlers sashiko-bot
2026-10-18 10:46 ` [PATCH v2 3/5] HID: wacom: add NULL pad_input guard to wacom_intuos_pad() Jinmo Yang
2026-10-18 10:46 ` [PATCH v2 4/5] HID: wacom: add NULL input guards to wacom_intuos_bt_irq() Jinmo Yang
2026-10-18 10:46 ` [PATCH v2 5/5] HID: wacom: add NULL input guards to Bamboo touch/button handlers Jinmo Yang
2026-10-18 12:47 ` [PATCH v3 0/6] HID: wacom: guard against NULL input devices on successful probe Jinmo Yang
2026-10-18 12:47 ` [PATCH v3 1/6] HID: wacom: check the input device in the shared report helpers Jinmo Yang
2026-10-18 12:47 ` [PATCH v3 2/6] HID: wacom: check the input devices in the legacy irq handlers Jinmo Yang
2026-10-18 12:47 ` [PATCH v3 3/6] HID: wacom: add NULL pad_input guard to wacom_intuos_pad() Jinmo Yang
2026-10-18 12:47 ` [PATCH v3 4/6] HID: wacom: add NULL input guards to wacom_intuos_bt_irq() Jinmo Yang
2026-10-18 12:47 ` [PATCH v3 5/6] HID: wacom: add NULL input guards to Bamboo touch/button handlers Jinmo Yang
2026-10-18 12:47 ` [PATCH v3 6/6] HID: wacom: add NULL touch_input guards to remaining touch handlers Jinmo Yang
2026-05-23 15:45 ` [PATCH] HID: wacom: fix NULL pointer dereference in wacom_intuos_pad() sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261018104617.743771-3-jinmo44.yang@gmail.com \
--to=jinmo44.yang@gmail.com \
--cc=bentiss@kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=jason.gerecke@wacom.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ping.cheng@wacom.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox