From: Myeonghun Pak <mhun512@gmail.com>
To: even.xu@intel.com, xinpeng.sun@intel.com, jikos@kernel.org,
bentiss@kernel.org
Cc: srinivas.pandruvada@linux.intel.com, mpearson-lenovo@squebb.ca,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
ae878000@gmail.com
Subject: [PATCH v3 1/2] HID: intel-thc-hid: quickspi: quiesce IRQs during teardown
Date: Thu, 12 Nov 2026 01:37:51 -0500 [thread overview]
Message-ID: <20261112T063704Z-thc-v3-1-mhun512@gmail.com> (raw)
In-Reply-To: <20261112T063704Z-thc-v3-0-mhun512@gmail.com>
The managed IRQ can access HID/DMA buffers or queue recovery work while
remove or probe unwind tears down those resources.
Disable and synchronize the IRQ, drain recovery work, then mask THC
interrupts before freeing the IRQ and releasing HID/DMA resources.
Track IRQ/DMA initialization for conditional probe cleanup.
Disable the IRQ before shutdown deinit as well. Keep IRQ disabling and
release outside the shared hibernation helper.
Found by a static analysis tool under development.
Fixes: 4138f21115ae ("HID: intel-thc-hid: intel-quickspi: Complete THC QuickSPI driver")
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
---
Changes in v3:
- Add blank lines in the probe error path (Even).
drivers/hid/intel-thc-hid/intel-quickspi/pci-quickspi.c | 32 ++++++++++++++++++++++++++------
1 file changed, 26 insertions(+), 6 deletions(-)
diff --git a/drivers/hid/intel-thc-hid/intel-quickspi/pci-quickspi.c b/drivers/hid/intel-thc-hid/intel-quickspi/pci-quickspi.c
index bf49d8ce5f07..3aa0ae81053e 100644
--- a/drivers/hid/intel-thc-hid/intel-quickspi/pci-quickspi.c
+++ b/drivers/hid/intel-thc-hid/intel-quickspi/pci-quickspi.c
@@ -600,6 +600,8 @@
const struct pci_device_id *id)
{
struct quickspi_device *qsdev;
+ bool dma_initialized = false;
+ bool irq_requested = false;
void __iomem *mem_addr;
int ret;
@@ -652,6 +654,7 @@
qsdev);
if (ret)
goto dev_deinit;
+ irq_requested = true;
ret = reset_tic(qsdev);
if (ret) {
@@ -670,17 +673,18 @@
dev_err(&pdev->dev, "Setup THC DMA failed, ret= %d\n", ret);
goto dev_deinit;
}
+ dma_initialized = true;
ret = quickspi_get_report_descriptor(qsdev);
if (ret) {
dev_err(&pdev->dev, "Get report descriptor failed, ret = %d\n", ret);
- goto dma_deinit;
+ goto dev_deinit;
}
ret = quickspi_hid_probe(qsdev);
if (ret) {
dev_err(&pdev->dev, "Failed to register HID device, ret = %d\n", ret);
- goto dma_deinit;
+ goto dev_deinit;
}
qsdev->state = QUICKSPI_ENABLED;
@@ -695,10 +699,20 @@
return 0;
-dma_deinit:
- quickspi_dma_deinit(qsdev);
dev_deinit:
+ if (irq_requested) {
+ WRITE_ONCE(qsdev->recovery_disabled, true);
+ disable_irq(pdev->irq);
+ }
+
quickspi_dev_deinit(qsdev);
+
+ if (irq_requested)
+ devm_free_irq(&pdev->dev, pdev->irq, qsdev);
+
+ if (dma_initialized)
+ quickspi_dma_deinit(qsdev);
+
disable_pci_device:
pci_clear_master(pdev);
@@ -721,9 +735,12 @@
if (!qsdev)
return;
+ WRITE_ONCE(qsdev->recovery_disabled, true);
+ disable_irq(pdev->irq);
+ quickspi_dev_deinit(qsdev);
+ devm_free_irq(&pdev->dev, pdev->irq, qsdev);
+
quickspi_hid_remove(qsdev);
-
- quickspi_dev_deinit(qsdev);
quickspi_dma_deinit(qsdev);
@@ -749,6 +766,9 @@
qsdev = pci_get_drvdata(pdev);
if (!qsdev)
return;
+
+ WRITE_ONCE(qsdev->recovery_disabled, true);
+ disable_irq(pdev->irq);
quickspi_dev_deinit(qsdev);
base-commit: b3dfbde62cf1981c4638939c159dfd087b7a72e9
--
2.53.0
next prev parent reply other threads:[~2026-11-12 6:37 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-12 6:37 [PATCH v3 0/2] HID: intel-thc-hid: quiesce IRQs during teardown Myeonghun Pak
2026-11-12 6:37 ` Myeonghun Pak [this message]
2026-11-12 6:50 ` [PATCH v3 1/2] HID: intel-thc-hid: quickspi: " sashiko-bot
2026-11-12 8:52 ` Xu, Even
2026-11-12 6:37 ` [PATCH v3 2/2] HID: intel-thc-hid: quicki2c: " Myeonghun Pak
2026-11-12 6:59 ` sashiko-bot
2026-11-12 8:52 ` Xu, Even
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261112T063704Z-thc-v3-1-mhun512@gmail.com \
--to=mhun512@gmail.com \
--cc=ae878000@gmail.com \
--cc=bentiss@kernel.org \
--cc=even.xu@intel.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mpearson-lenovo@squebb.ca \
--cc=srinivas.pandruvada@linux.intel.com \
--cc=xinpeng.sun@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox