Linux Input/HID development
 help / color / mirror / Atom feed
From: rofikkerneldev <rofikcoga@gmail.com>
To: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	rofikkerneldev <rofikcoga@gmail.com>
Subject: [PATCH v1 00/11] arm64: qcom: Add initial support for LG V60 ThinQ 5G (timelm)
Date: Tue, 17 Nov 2026 13:39:35 +0100	[thread overview]
Message-ID: <20261117123946.668557-1-rofikcoga@gmail.com> (raw)

This series adds initial mainline support for the LG V60 ThinQ 5G (timelm),
an SM8250-based flagship smartphone released in 2020.

The series enables:
- DT binding and SoC board description for LG V60 ThinQ 5G (timelm)
- Memory reservations for bootloader and firmware log regions
- DRM panel driver and binding for the 1080x2460 SW43103 AMOLED display
- Touchscreen driver and binding for the Silicon Works SW42902 controller
- USB Type-C TCPM sink mode on PM8150B
- Bluetooth HCI on GENI UART6 with QCA6390 power sequencing
- Storage (UFS), SD card, volume keys, and thermal management
- Entries in MAINTAINERS for timelm platform, panel, and touchscreen

All patches pass checkpatch.pl --strict with 0 errors and 0 warnings,
and the device tree builds cleanly against Linux 7.4-rc3.

The series is also available on GitHub:
https://github.com/rofikkerneldev/linux_timelm/tree/timelm-v74-stage1

Signed-off-by: rofikkerneldev <rofikcoga@gmail.com>

rofikkerneldev (11):
  dt-bindings: arm: qcom: add LG V60 ThinQ 5G (timelm)
  arm64: dts: qcom: add LG V60 ThinQ 5G (timelm) support
  arm64: dts: qcom: sm8250-lge-timelm: add reserved memory regions
  dt-bindings: display: panel: add LG SW43103
  drm/panel: add LG SW43103 panel driver
  dt-bindings: input: touchscreen: add Silicon Works SW42902
  Input: touchscreen: add Silicon Works SW42902 support
  arm64: dts: qcom: sm8250-lge-timelm: enable SW43103 panel
  arm64: dts: qcom: sm8250-lge-timelm: add SW42902 touchscreen
  arm64: dts: qcom: sm8250-lge-timelm: enable USB Type-C
  arm64: dts: qcom: sm8250-lge-timelm: add QCA6390 Bluetooth

 .../devicetree/bindings/arm/qcom.yaml         |   1 +
 .../bindings/display/panel/lg,sw43103.yaml    |  70 ++
 .../input/touchscreen/lg,sw42902.yaml         |  74 ++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 MAINTAINERS                                   |  19 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../arm64/boot/dts/qcom/sm8250-lge-timelm.dts | 744 ++++++++++++++++++
 drivers/gpu/drm/panel/Kconfig                 |  13 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 drivers/gpu/drm/panel/panel-lg-sw43103.c      | 594 ++++++++++++++
 drivers/input/touchscreen/Kconfig             |  11 +
 drivers/input/touchscreen/Makefile            |   1 +
 drivers/input/touchscreen/sw42902.c           | 315 ++++++++
 13 files changed, 1846 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/lg,sw43103.yaml
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/lg,sw42902.yaml
 create mode 100644 arch/arm64/boot/dts/qcom/sm8250-lge-timelm.dts
 create mode 100644 drivers/gpu/drm/panel/panel-lg-sw43103.c
 create mode 100644 drivers/input/touchscreen/sw42902.c

-- 
2.39.5


             reply	other threads:[~2026-11-17 12:39 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-17 12:39 rofikkerneldev [this message]
2026-11-17 12:39 ` [PATCH v1 01/11] dt-bindings: arm: qcom: add LG V60 ThinQ 5G (timelm) rofikkerneldev
2026-11-17 12:47   ` sashiko-bot
2026-11-17 12:39 ` [PATCH v1 02/11] arm64: dts: qcom: add LG V60 ThinQ 5G (timelm) support rofikkerneldev
2026-11-17 12:39 ` [PATCH v1 03/11] arm64: dts: qcom: sm8250-lge-timelm: add reserved memory regions rofikkerneldev
2026-11-17 12:39 ` [PATCH v1 04/11] dt-bindings: display: panel: add LG SW43103 rofikkerneldev
2026-11-17 12:51   ` sashiko-bot
2026-11-17 12:39 ` [PATCH v1 05/11] drm/panel: add LG SW43103 panel driver rofikkerneldev
2026-11-17 12:39 ` [PATCH v1 06/11] dt-bindings: input: touchscreen: add Silicon Works SW42902 rofikkerneldev
2026-11-17 12:51   ` sashiko-bot
2026-11-17 12:39 ` [PATCH v1 07/11] Input: touchscreen: add Silicon Works SW42902 support rofikkerneldev
2026-11-17 12:39 ` [PATCH v1 08/11] arm64: dts: qcom: sm8250-lge-timelm: enable SW43103 panel rofikkerneldev
2026-11-17 12:39 ` [PATCH v1 09/11] arm64: dts: qcom: sm8250-lge-timelm: add SW42902 touchscreen rofikkerneldev
2026-11-17 12:39 ` [PATCH v1 10/11] arm64: dts: qcom: sm8250-lge-timelm: enable USB Type-C rofikkerneldev
2026-11-17 12:39 ` [PATCH v1 11/11] arm64: dts: qcom: sm8250-lge-timelm: add QCA6390 Bluetooth rofikkerneldev

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261117123946.668557-1-rofikcoga@gmail.com \
    --to=rofikcoga@gmail.com \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox