[PATCH v2 00/12] platform/surface: aggregator: Add support for client hot-removal

[PATCH v2 00/12] platform/surface: aggregator: Add support for client hot-removal

[Maximilian Luz]

Summary:

  Add support for the HID type cover input devices on the Pro 8 and all
  requirements for that.


Blurb from v1:

  This series adds support for the type cover of the Surface Pro 8. On
  the Pro 8, the type cover is (unlike on previous generations) handled
  via the Surface System Aggregator Module (SSAM). As the type cover is
  detachable, care needs to be taken and the respective SSAM (HID)
  client devices need to be properly removed when detached and
  re-initialized when attached.
  
  Therefore, this series does three things:
  
   1. Improve hot-removal support for SSAM client devices. When
      hot-removing clients, subsequent communication may time out.
  
      In the worst case, this can lead to problems when devices are
      detached and re-attached quickly, before we can remove their
      respective kernel representations. This can then lead to devices
      being in an uninitialized state, preventing, for example, touchpad
      gestures from working properly as the required HID feature report
      has not been sent.
  
      Therefore, handle hot-removal of devices more gracefully by
      avoiding communication once it has been detected and ensure that
      devices are actually removed.
   
   2. Generify SSAM subsystem hubs and add a KIP hub. On the Surface Pro
      8, the KIP subsystem (only that abbreviation is known) is
      responsible for managing type-cover devices. This hub acts as the
      controller for device removal similar to the BAS (detachable base)
      subsystem hub on the Surface Book 3 (therefore we can share most
      of the code between them).
  
   3. Add the (HID) type-cover clients of the Surface Pro 8 to the
      aggregator registry.


Changes in v2:

 - Introduce "platform/surface: aggregator: Allow is_ssam_device() to be
   used when CONFIG_SURFACE_AGGREGATOR_BUS is disabled" to fix an
   undefined reference  build issue when CONFIG_SURFACE_AGGREGATOR_BUS
   is disabled.

 - Make SSAM hub device UIDs consistent.
    - Introduce "platform/surface: aggregator_registry: Change device ID
      for base hub" to make association between hub and subsystem target
      category more obvious.
    - Change hub device ID for KIP subsystem hub to be consistent with
      the id of the already existing BAS hub.


Maximilian Luz (12):
  platform/surface: aggregator: Allow is_ssam_device() to be used when
    CONFIG_SURFACE_AGGREGATOR_BUS is disabled
  platform/surface: aggregator: Allow devices to be marked as
    hot-removed
  platform/surface: aggregator: Allow notifiers to avoid communication
    on unregistering
  platform/surface: aggregator_registry: Use client device wrappers for
    notifier registration
  power/supply: surface_charger: Use client device wrappers for notifier
    registration
  power/supply: surface_battery: Use client device wrappers for notifier
    registration
  HID: surface-hid: Add support for hot-removal
  platform/surface: aggregator: Add comment for KIP subsystem category
  platform/surface: aggregator_registry: Generify subsystem hub
    functionality
  platform/surface: aggregator_registry: Change device ID for base hub
  platform/surface: aggregator_registry: Add KIP device hub
  platform/surface: aggregator_registry: Add support for keyboard cover
    on Surface Pro 8

 .../driver-api/surface_aggregator/client.rst  |   6 +-
 drivers/hid/surface-hid/surface_hid_core.c    |  38 +-
 .../platform/surface/aggregator/controller.c  |  53 ++-
 .../surface/surface_aggregator_registry.c     | 403 +++++++++++++-----
 drivers/power/supply/surface_battery.c        |   4 +-
 drivers/power/supply/surface_charger.c        |   4 +-
 include/linux/surface_aggregator/controller.h |  24 +-
 include/linux/surface_aggregator/device.h     | 125 +++++-
 include/linux/surface_aggregator/serial_hub.h |   2 +-
 9 files changed, 513 insertions(+), 146 deletions(-)

-- 
2.36.1

[PATCH v2 01/12] platform/surface: aggregator: Allow is_ssam_device() to be used when CONFIG_SURFACE_AGGREGATOR_BUS is disabled

[Maximilian Luz]

In SSAM subsystem drivers that handle both ACPI and SSAM-native client
devices, we may want to check whether we have a SSAM (native) client
device. Further, we may want to do this even when instantiation thereof
cannot happen due to CONFIG_SURFACE_AGGREGATOR_BUS=n. Currently, doing
so causes an error due to an undefined reference error due to
ssam_device_type being placed in the bus source unit.

Therefore, if CONFIG_SURFACE_AGGREGATOR_BUS is not defined, simply let
is_ssam_device() return false to prevent this error.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
---

Changes in v2:
 - Introduce this patch to fix a build issue later on.

---
 include/linux/surface_aggregator/device.h | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/include/linux/surface_aggregator/device.h b/include/linux/surface_aggregator/device.h
index cc257097eb05..62b38b4487eb 100644
--- a/include/linux/surface_aggregator/device.h
+++ b/include/linux/surface_aggregator/device.h
@@ -177,6 +177,8 @@ struct ssam_device_driver {
 	void (*remove)(struct ssam_device *sdev);
 };
 
+#ifdef CONFIG_SURFACE_AGGREGATOR_BUS
+
 extern struct bus_type ssam_bus_type;
 extern const struct device_type ssam_device_type;
 
@@ -193,6 +195,15 @@ static inline bool is_ssam_device(struct device *d)
 	return d->type == &ssam_device_type;
 }
 
+#else /* CONFIG_SURFACE_AGGREGATOR_BUS */
+
+static inline bool is_ssam_device(struct device *d)
+{
+	return false;
+}
+
+#endif /* CONFIG_SURFACE_AGGREGATOR_BUS */
+
 /**
  * to_ssam_device() - Casts the given device to a SSAM client device.
  * @d: The device to cast.
-- 
2.36.1

[PATCH v2 02/12] platform/surface: aggregator: Allow devices to be marked as hot-removed

[Maximilian Luz]

Some SSAM devices, notably the keyboard cover (keyboard and touchpad) on
the Surface Pro 8, can be hot-removed. When this occurs, communication
with the device may fail and time out. This timeout can unnecessarily
block and slow down device removal and even cause issues when the
devices are detached and re-attached quickly. Thus, communication should
generally be avoided once hot-removal is detected.

While we already remove a device as soon as we detect its (hot-)removal,
the corresponding device driver may still attempt to communicate with
the device during teardown. This is especially critical as communication
failure may also extend to disabling of events, which is typically done
at that stage.

Add a flag to allow marking devices as hot-removed. This can then be
used during client driver teardown to check if any communication
attempts should be avoided.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
---

Changes in v2:
  - none

---
 include/linux/surface_aggregator/device.h | 48 +++++++++++++++++++++--
 1 file changed, 45 insertions(+), 3 deletions(-)

diff --git a/include/linux/surface_aggregator/device.h b/include/linux/surface_aggregator/device.h
index 62b38b4487eb..6df7c8d4e50e 100644
--- a/include/linux/surface_aggregator/device.h
+++ b/include/linux/surface_aggregator/device.h
@@ -148,17 +148,30 @@ struct ssam_device_uid {
 #define SSAM_SDEV(cat, tid, iid, fun) \
 	SSAM_DEVICE(SSAM_DOMAIN_SERIALHUB, SSAM_SSH_TC_##cat, tid, iid, fun)
 
+/*
+ * enum ssam_device_flags - Flags for SSAM client devices.
+ * @SSAM_DEVICE_HOT_REMOVED_BIT:
+ *	The device has been hot-removed. Further communication with it may time
+ *	out and should be avoided.
+ */
+enum ssam_device_flags {
+	SSAM_DEVICE_HOT_REMOVED_BIT = 0,
+};
+
 /**
  * struct ssam_device - SSAM client device.
- * @dev:  Driver model representation of the device.
- * @ctrl: SSAM controller managing this device.
- * @uid:  UID identifying the device.
+ * @dev:   Driver model representation of the device.
+ * @ctrl:  SSAM controller managing this device.
+ * @uid:   UID identifying the device.
+ * @flags: Device state flags, see &enum ssam_device_flags.
  */
 struct ssam_device {
 	struct device dev;
 	struct ssam_controller *ctrl;
 
 	struct ssam_device_uid uid;
+
+	unsigned long flags;
 };
 
 /**
@@ -251,6 +264,35 @@ struct ssam_device *ssam_device_alloc(struct ssam_controller *ctrl,
 int ssam_device_add(struct ssam_device *sdev);
 void ssam_device_remove(struct ssam_device *sdev);
 
+/**
+ * ssam_device_mark_hot_removed() - Mark the given device as hot-removed.
+ * @sdev: The device to mark as hot-removed.
+ *
+ * Mark the device as having been hot-removed. This signals drivers using the
+ * device that communication with the device should be avoided and may lead to
+ * timeouts.
+ */
+static inline void ssam_device_mark_hot_removed(struct ssam_device *sdev)
+{
+	dev_dbg(&sdev->dev, "marking device as hot-removed\n");
+	set_bit(SSAM_DEVICE_HOT_REMOVED_BIT, &sdev->flags);
+}
+
+/**
+ * ssam_device_is_hot_removed() - Check if the given device has been
+ * hot-removed.
+ * @sdev: The device to check.
+ *
+ * Checks if the given device has been marked as hot-removed. See
+ * ssam_device_mark_hot_removed() for more details.
+ *
+ * Return: Returns ``true`` if the device has been marked as hot-removed.
+ */
+static inline bool ssam_device_is_hot_removed(struct ssam_device *sdev)
+{
+	return test_bit(SSAM_DEVICE_HOT_REMOVED_BIT, &sdev->flags);
+}
+
 /**
  * ssam_device_get() - Increment reference count of SSAM client device.
  * @sdev: The device to increment the reference count of.
-- 
2.36.1

[PATCH v2 03/12] platform/surface: aggregator: Allow notifiers to avoid communication on unregistering

[Maximilian Luz]

When SSAM client devices have been (physically) hot-removed,
communication attempts with those devices may fail and time out. This
can even extend to event notifiers, due to which timeouts may occur
during device removal, slowing down that process.

Add a parameter to the notifier unregister function that allows skipping
communication with the EC to prevent this. Furthermore, add wrappers for
registering and unregistering notifiers belonging to SSAM client devices
that automatically check if the device has been marked as hot-removed
and communication should be avoided.

Note that non-SSAM client devices can generally not be hot-removed, so
also add a convenience wrapper for those, defaulting to allow
communication.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
---

Changes in v2:
  - none

---
 .../driver-api/surface_aggregator/client.rst  |  6 +-
 .../platform/surface/aggregator/controller.c  | 53 ++++++++++-----
 include/linux/surface_aggregator/controller.h | 24 ++++++-
 include/linux/surface_aggregator/device.h     | 66 +++++++++++++++++++
 4 files changed, 128 insertions(+), 21 deletions(-)

diff --git a/Documentation/driver-api/surface_aggregator/client.rst b/Documentation/driver-api/surface_aggregator/client.rst
index e519d374c378..27f95abdbe99 100644
--- a/Documentation/driver-api/surface_aggregator/client.rst
+++ b/Documentation/driver-api/surface_aggregator/client.rst
@@ -17,6 +17,8 @@
 .. |SSAM_DEVICE| replace:: :c:func:`SSAM_DEVICE`
 .. |ssam_notifier_register| replace:: :c:func:`ssam_notifier_register`
 .. |ssam_notifier_unregister| replace:: :c:func:`ssam_notifier_unregister`
+.. |ssam_device_notifier_register| replace:: :c:func:`ssam_device_notifier_register`
+.. |ssam_device_notifier_unregister| replace:: :c:func:`ssam_device_notifier_unregister`
 .. |ssam_request_sync| replace:: :c:func:`ssam_request_sync`
 .. |ssam_event_mask| replace:: :c:type:`enum ssam_event_mask <ssam_event_mask>`
 
@@ -312,7 +314,9 @@ Handling Events
 To receive events from the SAM EC, an event notifier must be registered for
 the desired event via |ssam_notifier_register|. The notifier must be
 unregistered via |ssam_notifier_unregister| once it is not required any
-more.
+more. For |ssam_device| type clients, the |ssam_device_notifier_register| and
+|ssam_device_notifier_unregister| wrappers should be preferred as they properly
+handle hot-removal of client devices.
 
 Event notifiers are registered by providing (at minimum) a callback to call
 in case an event has been received, the registry specifying how the event
diff --git a/drivers/platform/surface/aggregator/controller.c b/drivers/platform/surface/aggregator/controller.c
index b8c377b3f932..6de834b52b63 100644
--- a/drivers/platform/surface/aggregator/controller.c
+++ b/drivers/platform/surface/aggregator/controller.c
@@ -2199,16 +2199,26 @@ static int ssam_nf_refcount_enable(struct ssam_controller *ctrl,
 }
 
 /**
- * ssam_nf_refcount_disable_free() - Disable event for reference count entry if it is
- * no longer in use and free the corresponding entry.
+ * ssam_nf_refcount_disable_free() - Disable event for reference count entry if
+ * it is no longer in use and free the corresponding entry.
  * @ctrl:  The controller to disable the event on.
  * @entry: The reference count entry for the event to be disabled.
  * @flags: The flags used for enabling the event on the EC.
+ * @ec:    Flag specifying if the event should actually be disabled on the EC.
  *
- * If the reference count equals zero, i.e. the event is no longer requested by
- * any client, the event will be disabled and the corresponding reference count
- * entry freed. The reference count entry must not be used any more after a
- * call to this function.
+ * If ``ec`` equals ``true`` and the reference count equals zero (i.e. the
+ * event is no longer requested by any client), the specified event will be
+ * disabled on the EC via the corresponding request.
+ *
+ * If ``ec`` equals ``false``, no request will be sent to the EC and the event
+ * can be considered in a detached state (i.e. no longer used but still
+ * enabled). Disabling an event via this method may be required for
+ * hot-removable devices, where event disable requests may time out after the
+ * device has been physically removed.
+ *
+ * In both cases, if the reference count equals zero, the corresponding
+ * reference count entry will be freed. The reference count entry must not be
+ * used any more after a call to this function.
  *
  * Also checks if the flags used for disabling the event match the flags used
  * for enabling the event and warns if they do not (regardless of reference
@@ -2223,7 +2233,7 @@ static int ssam_nf_refcount_enable(struct ssam_controller *ctrl,
  * returns the status of the event-enable EC command.
  */
 static int ssam_nf_refcount_disable_free(struct ssam_controller *ctrl,
-					 struct ssam_nf_refcount_entry *entry, u8 flags)
+					 struct ssam_nf_refcount_entry *entry, u8 flags, bool ec)
 {
 	const struct ssam_event_registry reg = entry->key.reg;
 	const struct ssam_event_id id = entry->key.id;
@@ -2232,8 +2242,9 @@ static int ssam_nf_refcount_disable_free(struct ssam_controller *ctrl,
 
 	lockdep_assert_held(&nf->lock);
 
-	ssam_dbg(ctrl, "disabling event (reg: %#04x, tc: %#04x, iid: %#04x, rc: %d)\n",
-		 reg.target_category, id.target_category, id.instance, entry->refcount);
+	ssam_dbg(ctrl, "%s event (reg: %#04x, tc: %#04x, iid: %#04x, rc: %d)\n",
+		 ec ? "disabling" : "detaching", reg.target_category, id.target_category,
+		 id.instance, entry->refcount);
 
 	if (entry->flags != flags) {
 		ssam_warn(ctrl,
@@ -2242,7 +2253,7 @@ static int ssam_nf_refcount_disable_free(struct ssam_controller *ctrl,
 			  id.instance);
 	}
 
-	if (entry->refcount == 0) {
+	if (ec && entry->refcount == 0) {
 		status = ssam_ssh_event_disable(ctrl, reg, id, flags);
 		kfree(entry);
 	}
@@ -2322,20 +2333,26 @@ int ssam_notifier_register(struct ssam_controller *ctrl, struct ssam_event_notif
 EXPORT_SYMBOL_GPL(ssam_notifier_register);
 
 /**
- * ssam_notifier_unregister() - Unregister an event notifier.
- * @ctrl: The controller the notifier has been registered on.
- * @n:    The event notifier to unregister.
+ * __ssam_notifier_unregister() - Unregister an event notifier.
+ * @ctrl:    The controller the notifier has been registered on.
+ * @n:       The event notifier to unregister.
+ * @disable: Whether to disable the corresponding event on the EC.
  *
  * Unregister an event notifier. Decrement the usage counter of the associated
  * SAM event if the notifier is not marked as an observer. If the usage counter
- * reaches zero, the event will be disabled.
+ * reaches zero and ``disable`` equals ``true``, the event will be disabled.
+ *
+ * Useful for hot-removable devices, where communication may fail once the
+ * device has been physically removed. In that case, specifying ``disable`` as
+ * ``false`` avoids communication with the EC.
  *
  * Return: Returns zero on success, %-ENOENT if the given notifier block has
  * not been registered on the controller. If the given notifier block was the
  * last one associated with its specific event, returns the status of the
  * event-disable EC-command.
  */
-int ssam_notifier_unregister(struct ssam_controller *ctrl, struct ssam_event_notifier *n)
+int __ssam_notifier_unregister(struct ssam_controller *ctrl, struct ssam_event_notifier *n,
+			       bool disable)
 {
 	u16 rqid = ssh_tc_to_rqid(n->event.id.target_category);
 	struct ssam_nf_refcount_entry *entry;
@@ -2373,7 +2390,7 @@ int ssam_notifier_unregister(struct ssam_controller *ctrl, struct ssam_event_not
 			goto remove;
 		}
 
-		status = ssam_nf_refcount_disable_free(ctrl, entry, n->event.flags);
+		status = ssam_nf_refcount_disable_free(ctrl, entry, n->event.flags, disable);
 	}
 
 remove:
@@ -2383,7 +2400,7 @@ int ssam_notifier_unregister(struct ssam_controller *ctrl, struct ssam_event_not
 
 	return status;
 }
-EXPORT_SYMBOL_GPL(ssam_notifier_unregister);
+EXPORT_SYMBOL_GPL(__ssam_notifier_unregister);
 
 /**
  * ssam_controller_event_enable() - Enable the specified event.
@@ -2477,7 +2494,7 @@ int ssam_controller_event_disable(struct ssam_controller *ctrl,
 		return -ENOENT;
 	}
 
-	status = ssam_nf_refcount_disable_free(ctrl, entry, flags);
+	status = ssam_nf_refcount_disable_free(ctrl, entry, flags, true);
 
 	mutex_unlock(&nf->lock);
 	return status;
diff --git a/include/linux/surface_aggregator/controller.h b/include/linux/surface_aggregator/controller.h
index 74bfdffaf7b0..50a2b4926c06 100644
--- a/include/linux/surface_aggregator/controller.h
+++ b/include/linux/surface_aggregator/controller.h
@@ -835,8 +835,28 @@ struct ssam_event_notifier {
 int ssam_notifier_register(struct ssam_controller *ctrl,
 			   struct ssam_event_notifier *n);
 
-int ssam_notifier_unregister(struct ssam_controller *ctrl,
-			     struct ssam_event_notifier *n);
+int __ssam_notifier_unregister(struct ssam_controller *ctrl,
+			       struct ssam_event_notifier *n, bool disable);
+
+/**
+ * ssam_notifier_unregister() - Unregister an event notifier.
+ * @ctrl:    The controller the notifier has been registered on.
+ * @n:       The event notifier to unregister.
+ *
+ * Unregister an event notifier. Decrement the usage counter of the associated
+ * SAM event if the notifier is not marked as an observer. If the usage counter
+ * reaches zero, the event will be disabled.
+ *
+ * Return: Returns zero on success, %-ENOENT if the given notifier block has
+ * not been registered on the controller. If the given notifier block was the
+ * last one associated with its specific event, returns the status of the
+ * event-disable EC-command.
+ */
+static inline int ssam_notifier_unregister(struct ssam_controller *ctrl,
+					   struct ssam_event_notifier *n)
+{
+	return __ssam_notifier_unregister(ctrl, n, true);
+}
 
 int ssam_controller_event_enable(struct ssam_controller *ctrl,
 				 struct ssam_event_registry reg,
diff --git a/include/linux/surface_aggregator/device.h b/include/linux/surface_aggregator/device.h
index 6df7c8d4e50e..c418f7f2732d 100644
--- a/include/linux/surface_aggregator/device.h
+++ b/include/linux/surface_aggregator/device.h
@@ -483,4 +483,70 @@ static inline void ssam_remove_clients(struct device *dev) {}
 				    sdev->uid.instance, ret);		\
 	}
 
+
+/* -- Helpers for client-device notifiers. ---------------------------------- */
+
+/**
+ * ssam_device_notifier_register() - Register an event notifier for the
+ * specified client device.
+ * @sdev: The device the notifier should be registered on.
+ * @n:    The event notifier to register.
+ *
+ * Register an event notifier. Increment the usage counter of the associated
+ * SAM event if the notifier is not marked as an observer. If the event is not
+ * marked as an observer and is currently not enabled, it will be enabled
+ * during this call. If the notifier is marked as an observer, no attempt will
+ * be made at enabling any event and no reference count will be modified.
+ *
+ * Notifiers marked as observers do not need to be associated with one specific
+ * event, i.e. as long as no event matching is performed, only the event target
+ * category needs to be set.
+ *
+ * Return: Returns zero on success, %-ENOSPC if there have already been
+ * %INT_MAX notifiers for the event ID/type associated with the notifier block
+ * registered, %-ENOMEM if the corresponding event entry could not be
+ * allocated, %-ENODEV if the device is marked as hot-removed. If this is the
+ * first time that a notifier block is registered for the specific associated
+ * event, returns the status of the event-enable EC-command.
+ */
+static inline int ssam_device_notifier_register(struct ssam_device *sdev,
+						struct ssam_event_notifier *n)
+{
+	/*
+	 * Note that this check does not provide any guarantees whatsoever as
+	 * hot-removal could happen at any point and we can't protect against
+	 * it. Nevertheless, if we can detect hot-removal, bail early to avoid
+	 * communication timeouts.
+	 */
+	if (ssam_device_is_hot_removed(sdev))
+		return -ENODEV;
+
+	return ssam_notifier_register(sdev->ctrl, n);
+}
+
+/**
+ * ssam_device_notifier_unregister() - Unregister an event notifier for the
+ * specified client device.
+ * @sdev: The device the notifier has been registered on.
+ * @n:    The event notifier to unregister.
+ *
+ * Unregister an event notifier. Decrement the usage counter of the associated
+ * SAM event if the notifier is not marked as an observer. If the usage counter
+ * reaches zero, the event will be disabled.
+ *
+ * In case the device has been marked as hot-removed, the event will not be
+ * disabled on the EC, as in those cases any attempt at doing so may time out.
+ *
+ * Return: Returns zero on success, %-ENOENT if the given notifier block has
+ * not been registered on the controller. If the given notifier block was the
+ * last one associated with its specific event, returns the status of the
+ * event-disable EC-command.
+ */
+static inline int ssam_device_notifier_unregister(struct ssam_device *sdev,
+						  struct ssam_event_notifier *n)
+{
+	return __ssam_notifier_unregister(sdev->ctrl, n,
+					  !ssam_device_is_hot_removed(sdev));
+}
+
 #endif /* _LINUX_SURFACE_AGGREGATOR_DEVICE_H */
-- 
2.36.1

[PATCH v2 04/12] platform/surface: aggregator_registry: Use client device wrappers for notifier registration

[Maximilian Luz]

Use newly introduced client device wrapper functions for notifier
registration and unregistration.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
---

Changes in v2:
  - none

---
 drivers/platform/surface/surface_aggregator_registry.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c
index ce2bd88feeaa..9f630e890ff7 100644
--- a/drivers/platform/surface/surface_aggregator_registry.c
+++ b/drivers/platform/surface/surface_aggregator_registry.c
@@ -468,7 +468,7 @@ static int ssam_base_hub_probe(struct ssam_device *sdev)
 
 	ssam_device_set_drvdata(sdev, hub);
 
-	status = ssam_notifier_register(sdev->ctrl, &hub->notif);
+	status = ssam_device_notifier_register(sdev, &hub->notif);
 	if (status)
 		return status;
 
@@ -480,7 +480,7 @@ static int ssam_base_hub_probe(struct ssam_device *sdev)
 	return 0;
 
 err:
-	ssam_notifier_unregister(sdev->ctrl, &hub->notif);
+	ssam_device_notifier_unregister(sdev, &hub->notif);
 	cancel_delayed_work_sync(&hub->update_work);
 	ssam_remove_clients(&sdev->dev);
 	return status;
@@ -492,7 +492,7 @@ static void ssam_base_hub_remove(struct ssam_device *sdev)
 
 	sysfs_remove_group(&sdev->dev.kobj, &ssam_base_hub_group);
 
-	ssam_notifier_unregister(sdev->ctrl, &hub->notif);
+	ssam_device_notifier_unregister(sdev, &hub->notif);
 	cancel_delayed_work_sync(&hub->update_work);
 	ssam_remove_clients(&sdev->dev);
 }
-- 
2.36.1

[PATCH v2 05/12] power/supply: surface_charger: Use client device wrappers for notifier registration

[Maximilian Luz]

Use newly introduced client device wrapper functions for notifier
registration and unregistration.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
---

Changes in v2:
  - none

---
 drivers/power/supply/surface_charger.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/power/supply/surface_charger.c b/drivers/power/supply/surface_charger.c
index a060c36c7766..59182d55742d 100644
--- a/drivers/power/supply/surface_charger.c
+++ b/drivers/power/supply/surface_charger.c
@@ -216,7 +216,7 @@ static int spwr_ac_register(struct spwr_ac_device *ac)
 	if (IS_ERR(ac->psy))
 		return PTR_ERR(ac->psy);
 
-	return ssam_notifier_register(ac->sdev->ctrl, &ac->notif);
+	return ssam_device_notifier_register(ac->sdev, &ac->notif);
 }
 
 
@@ -251,7 +251,7 @@ static void surface_ac_remove(struct ssam_device *sdev)
 {
 	struct spwr_ac_device *ac = ssam_device_get_drvdata(sdev);
 
-	ssam_notifier_unregister(sdev->ctrl, &ac->notif);
+	ssam_device_notifier_unregister(sdev, &ac->notif);
 }
 
 static const struct spwr_psy_properties spwr_psy_props_adp1 = {
-- 
2.36.1

Re: [PATCH v2 05/12] power/supply: surface_charger: Use client device wrappers for notifier registration

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 1368 bytes --]

Hi,

On Fri, May 27, 2022 at 04:34:40AM +0200, Maximilian Luz wrote:
> Use newly introduced client device wrapper functions for notifier
> registration and unregistration.
> 
> Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>

Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>

-- Sebastian

> ---
> 
> Changes in v2:
>   - none
> 
> ---
>  drivers/power/supply/surface_charger.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/power/supply/surface_charger.c b/drivers/power/supply/surface_charger.c
> index a060c36c7766..59182d55742d 100644
> --- a/drivers/power/supply/surface_charger.c
> +++ b/drivers/power/supply/surface_charger.c
> @@ -216,7 +216,7 @@ static int spwr_ac_register(struct spwr_ac_device *ac)
>  	if (IS_ERR(ac->psy))
>  		return PTR_ERR(ac->psy);
>  
> -	return ssam_notifier_register(ac->sdev->ctrl, &ac->notif);
> +	return ssam_device_notifier_register(ac->sdev, &ac->notif);
>  }
>  
>  
> @@ -251,7 +251,7 @@ static void surface_ac_remove(struct ssam_device *sdev)
>  {
>  	struct spwr_ac_device *ac = ssam_device_get_drvdata(sdev);
>  
> -	ssam_notifier_unregister(sdev->ctrl, &ac->notif);
> +	ssam_device_notifier_unregister(sdev, &ac->notif);
>  }
>  
>  static const struct spwr_psy_properties spwr_psy_props_adp1 = {
> -- 
> 2.36.1
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[PATCH v2 06/12] power/supply: surface_battery: Use client device wrappers for notifier registration

[Maximilian Luz]

Use newly introduced client device wrapper functions for notifier
registration and unregistration.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
---

Changes in v2:
  - none

---
 drivers/power/supply/surface_battery.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/power/supply/surface_battery.c b/drivers/power/supply/surface_battery.c
index 5ec2e6bb2465..540707882bb0 100644
--- a/drivers/power/supply/surface_battery.c
+++ b/drivers/power/supply/surface_battery.c
@@ -802,7 +802,7 @@ static int spwr_battery_register(struct spwr_battery_device *bat)
 	if (IS_ERR(bat->psy))
 		return PTR_ERR(bat->psy);
 
-	return ssam_notifier_register(bat->sdev->ctrl, &bat->notif);
+	return ssam_device_notifier_register(bat->sdev, &bat->notif);
 }
 
 
@@ -837,7 +837,7 @@ static void surface_battery_remove(struct ssam_device *sdev)
 {
 	struct spwr_battery_device *bat = ssam_device_get_drvdata(sdev);
 
-	ssam_notifier_unregister(sdev->ctrl, &bat->notif);
+	ssam_device_notifier_unregister(sdev, &bat->notif);
 	cancel_delayed_work_sync(&bat->update_work);
 }
 
-- 
2.36.1

Re: [PATCH v2 06/12] power/supply: surface_battery: Use client device wrappers for notifier registration

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 1380 bytes --]

Hi,

On Fri, May 27, 2022 at 04:34:41AM +0200, Maximilian Luz wrote:
> Use newly introduced client device wrapper functions for notifier
> registration and unregistration.
> 
> Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
> ---

Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>

-- Sebastian

> 
> Changes in v2:
>   - none
> 
> ---
>  drivers/power/supply/surface_battery.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/power/supply/surface_battery.c b/drivers/power/supply/surface_battery.c
> index 5ec2e6bb2465..540707882bb0 100644
> --- a/drivers/power/supply/surface_battery.c
> +++ b/drivers/power/supply/surface_battery.c
> @@ -802,7 +802,7 @@ static int spwr_battery_register(struct spwr_battery_device *bat)
>  	if (IS_ERR(bat->psy))
>  		return PTR_ERR(bat->psy);
>  
> -	return ssam_notifier_register(bat->sdev->ctrl, &bat->notif);
> +	return ssam_device_notifier_register(bat->sdev, &bat->notif);
>  }
>  
>  
> @@ -837,7 +837,7 @@ static void surface_battery_remove(struct ssam_device *sdev)
>  {
>  	struct spwr_battery_device *bat = ssam_device_get_drvdata(sdev);
>  
> -	ssam_notifier_unregister(sdev->ctrl, &bat->notif);
> +	ssam_device_notifier_unregister(sdev, &bat->notif);
>  	cancel_delayed_work_sync(&bat->update_work);
>  }
>  
> -- 
> 2.36.1
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[PATCH v2 07/12] HID: surface-hid: Add support for hot-removal

[Maximilian Luz]

Add support for hot-removal of SSAM HID client devices.

Once a device has been hot-removed, further communication with it should
be avoided as it may fail and time out. While the device will be removed
as soon as we detect hot-removal, communication may still occur during
teardown, especially when unregistering notifiers.

While hot-removal is a surprise event that can happen at any time, try
to avoid communication as much as possible once it has been detected to
prevent timeouts that can slow down device removal and cause issues,
e.g. when quickly re-attaching the device.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
---

Changes in v2:
  - none

---
 drivers/hid/surface-hid/surface_hid_core.c | 38 +++++++++++++++++++++-
 1 file changed, 37 insertions(+), 1 deletion(-)

diff --git a/drivers/hid/surface-hid/surface_hid_core.c b/drivers/hid/surface-hid/surface_hid_core.c
index e46330b2e561..87637f813de2 100644
--- a/drivers/hid/surface-hid/surface_hid_core.c
+++ b/drivers/hid/surface-hid/surface_hid_core.c
@@ -19,12 +19,30 @@
 #include "surface_hid_core.h"
 
 
+/* -- Utility functions. ---------------------------------------------------- */
+
+static bool surface_hid_is_hot_removed(struct surface_hid_device *shid)
+{
+	/*
+	 * Non-ssam client devices, i.e. platform client devices, cannot be
+	 * hot-removed.
+	 */
+	if (!is_ssam_device(shid->dev))
+		return false;
+
+	return ssam_device_is_hot_removed(to_ssam_device(shid->dev));
+}
+
+
 /* -- Device descriptor access. --------------------------------------------- */
 
 static int surface_hid_load_hid_descriptor(struct surface_hid_device *shid)
 {
 	int status;
 
+	if (surface_hid_is_hot_removed(shid))
+		return -ENODEV;
+
 	status = shid->ops.get_descriptor(shid, SURFACE_HID_DESC_HID,
 			(u8 *)&shid->hid_desc, sizeof(shid->hid_desc));
 	if (status)
@@ -61,6 +79,9 @@ static int surface_hid_load_device_attributes(struct surface_hid_device *shid)
 {
 	int status;
 
+	if (surface_hid_is_hot_removed(shid))
+		return -ENODEV;
+
 	status = shid->ops.get_descriptor(shid, SURFACE_HID_DESC_ATTRS,
 			(u8 *)&shid->attrs, sizeof(shid->attrs));
 	if (status)
@@ -88,9 +109,18 @@ static int surface_hid_start(struct hid_device *hid)
 static void surface_hid_stop(struct hid_device *hid)
 {
 	struct surface_hid_device *shid = hid->driver_data;
+	bool hot_removed;
+
+	/*
+	 * Communication may fail for devices that have been hot-removed. This
+	 * also includes unregistration of HID events, so we need to check this
+	 * here. Only if the device has not been marked as hot-removed, we can
+	 * safely disable events.
+	 */
+	hot_removed = surface_hid_is_hot_removed(shid);
 
 	/* Note: This call will log errors for us, so ignore them here. */
-	ssam_notifier_unregister(shid->ctrl, &shid->notif);
+	__ssam_notifier_unregister(shid->ctrl, &shid->notif, !hot_removed);
 }
 
 static int surface_hid_open(struct hid_device *hid)
@@ -109,6 +139,9 @@ static int surface_hid_parse(struct hid_device *hid)
 	u8 *buf;
 	int status;
 
+	if (surface_hid_is_hot_removed(shid))
+		return -ENODEV;
+
 	buf = kzalloc(len, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
@@ -126,6 +159,9 @@ static int surface_hid_raw_request(struct hid_device *hid, unsigned char reportn
 {
 	struct surface_hid_device *shid = hid->driver_data;
 
+	if (surface_hid_is_hot_removed(shid))
+		return -ENODEV;
+
 	if (rtype == HID_OUTPUT_REPORT && reqtype == HID_REQ_SET_REPORT)
 		return shid->ops.output_report(shid, reportnum, buf, len);
 
-- 
2.36.1

[PATCH v2 08/12] platform/surface: aggregator: Add comment for KIP subsystem category

[Maximilian Luz]

The KIP subsystem (full name unknown, abbreviation has been obtained
through reverse engineering) handles detachable peripherals such as the
keyboard cover on the Surface Pro X and Surface Pro 8.

It is currently not entirely clear what this subsystem entails, but at
the very least it provides event notifications for when the keyboard
cover on the Surface Pro X and Surface Pro 8 have been detached or
re-attached, as well as the state that the keyboard cover is currently
in (e.g. folded-back, folded laptop-like, closed, etc.).

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
---

Changes in v2:
  - none

---
 include/linux/surface_aggregator/serial_hub.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/surface_aggregator/serial_hub.h b/include/linux/surface_aggregator/serial_hub.h
index c3de43edcffa..26b95ec12733 100644
--- a/include/linux/surface_aggregator/serial_hub.h
+++ b/include/linux/surface_aggregator/serial_hub.h
@@ -306,7 +306,7 @@ enum ssam_ssh_tc {
 	SSAM_SSH_TC_LPC = 0x0b,
 	SSAM_SSH_TC_TCL = 0x0c,
 	SSAM_SSH_TC_SFL = 0x0d,
-	SSAM_SSH_TC_KIP = 0x0e,
+	SSAM_SSH_TC_KIP = 0x0e,	/* Manages detachable peripherals (Pro X/8 keyboard cover) */
 	SSAM_SSH_TC_EXT = 0x0f,
 	SSAM_SSH_TC_BLD = 0x10,
 	SSAM_SSH_TC_BAS = 0x11,	/* Detachment system (Surface Book 2/3). */
-- 
2.36.1

[PATCH v2 09/12] platform/surface: aggregator_registry: Generify subsystem hub functionality

[Maximilian Luz]

The Surface System Aggregator Module (SSAM) has multiple subsystems that
can manage detachable devices. At the moment, we only support the "base"
(BAS/0x11) subsystem, which is used on the Surface Book 3 to manage
devices (including keyboard, touchpad, and secondary battery) connected
to the base of the device.

The Surface Pro 8 has a new type-cover with keyboard and touchpad, which
is managed via the KIP/0x0e subsystem. The general procedure is the
same, but with slightly different events and setup. To make
implementation of the KIP hub easier and prevent duplication, generify
the parts of the base hub that we can use for the KIP hub (or any
potential future subsystem hubs).

This also switches over to use the newly introduced "hot-remove"
functionality, which should prevent communication issues when devices
have been detached.

Lastly, also drop the undocumented and unused sysfs "state" attribute of
the base hub. It has at best been useful for debugging.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
---

Changes in v2:
  - none

---
 .../surface/surface_aggregator_registry.c     | 269 ++++++++++--------
 1 file changed, 153 insertions(+), 116 deletions(-)

diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c
index 9f630e890ff7..09cbeee2428b 100644
--- a/drivers/platform/surface/surface_aggregator_registry.c
+++ b/drivers/platform/surface/surface_aggregator_registry.c
@@ -308,30 +308,159 @@ static int ssam_hub_register_clients(struct device *parent, struct ssam_controll
 }
 
 
-/* -- SSAM base-hub driver. ------------------------------------------------- */
+/* -- SSAM generic subsystem hub driver framework. -------------------------- */
 
-/*
- * Some devices (especially battery) may need a bit of time to be fully usable
- * after being (re-)connected. This delay has been determined via
- * experimentation.
- */
-#define SSAM_BASE_UPDATE_CONNECT_DELAY		msecs_to_jiffies(2500)
+enum ssam_hub_state {
+	SSAM_HUB_UNINITIALIZED,		/* Only set during initialization. */
+	SSAM_HUB_CONNECTED,
+	SSAM_HUB_DISCONNECTED,
+};
 
-enum ssam_base_hub_state {
-	SSAM_BASE_HUB_UNINITIALIZED,
-	SSAM_BASE_HUB_CONNECTED,
-	SSAM_BASE_HUB_DISCONNECTED,
+enum ssam_hub_flags {
+	SSAM_HUB_HOT_REMOVED,
 };
 
-struct ssam_base_hub {
+struct ssam_hub {
 	struct ssam_device *sdev;
 
-	enum ssam_base_hub_state state;
+	enum ssam_hub_state state;
+	unsigned long flags;
+
 	struct delayed_work update_work;
+	unsigned long connect_delay;
 
 	struct ssam_event_notifier notif;
+
+	int (*get_state)(struct ssam_hub *hub, enum ssam_hub_state *state);
 };
 
+static void ssam_hub_update_workfn(struct work_struct *work)
+{
+	struct ssam_hub *hub = container_of(work, struct ssam_hub, update_work.work);
+	struct fwnode_handle *node = dev_fwnode(&hub->sdev->dev);
+	enum ssam_hub_state state;
+	int status = 0;
+
+	status = hub->get_state(hub, &state);
+	if (status)
+		return;
+
+	/*
+	 * There is a small possibility that hub devices were hot-removed and
+	 * re-added before we were able to remove them here. In that case, both
+	 * the state returned by get_state() and the state of the hub will
+	 * equal SSAM_HUB_CONNECTED and we would bail early below, which would
+	 * leave child devices without proper (re-)initialization and the
+	 * hot-remove flag set.
+	 *
+	 * Therefore, we check whether devices have been hot-removed via an
+	 * additional flag on the hub and, in this case, override the returned
+	 * hub state. In case of a missed disconnect (i.e. get_state returned
+	 * "connected"), we further need to re-schedule this work (with the
+	 * appropriate delay) as the actual connect work submission might have
+	 * been merged with this one.
+	 *
+	 * This then leads to one of two cases: Either we submit an unnecessary
+	 * work item (which will get ignored via either the queue or the state
+	 * checks) or, in the unlikely case that the work is actually required,
+	 * double the normal connect delay.
+	 */
+	if (test_and_clear_bit(SSAM_HUB_HOT_REMOVED, &hub->flags)) {
+		if (state == SSAM_HUB_CONNECTED)
+			schedule_delayed_work(&hub->update_work, hub->connect_delay);
+
+		state = SSAM_HUB_DISCONNECTED;
+	}
+
+	if (hub->state == state)
+		return;
+	hub->state = state;
+
+	if (hub->state == SSAM_HUB_CONNECTED)
+		status = ssam_hub_register_clients(&hub->sdev->dev, hub->sdev->ctrl, node);
+	else
+		ssam_remove_clients(&hub->sdev->dev);
+
+	if (status)
+		dev_err(&hub->sdev->dev, "failed to update hub child devices: %d\n", status);
+}
+
+static int ssam_hub_mark_hot_removed(struct device *dev, void *_data)
+{
+	struct ssam_device *sdev = to_ssam_device(dev);
+
+	if (is_ssam_device(dev))
+		ssam_device_mark_hot_removed(sdev);
+
+	return 0;
+}
+
+static void ssam_hub_update(struct ssam_hub *hub, bool connected)
+{
+	unsigned long delay;
+
+	/* Mark devices as hot-removed before we remove any. */
+	if (!connected) {
+		set_bit(SSAM_HUB_HOT_REMOVED, &hub->flags);
+		device_for_each_child_reverse(&hub->sdev->dev, NULL, ssam_hub_mark_hot_removed);
+	}
+
+	/*
+	 * Delay update when the base/keyboard cover is being connected to give
+	 * devices/EC some time to set up.
+	 */
+	delay = connected ? hub->connect_delay : 0;
+
+	schedule_delayed_work(&hub->update_work, delay);
+}
+
+static int __maybe_unused ssam_hub_resume(struct device *dev)
+{
+	struct ssam_hub *hub = dev_get_drvdata(dev);
+
+	schedule_delayed_work(&hub->update_work, 0);
+	return 0;
+}
+static SIMPLE_DEV_PM_OPS(ssam_hub_pm_ops, NULL, ssam_hub_resume);
+
+static int ssam_hub_setup(struct ssam_device *sdev, struct ssam_hub *hub)
+{
+	int status;
+
+	hub->sdev = sdev;
+	hub->state = SSAM_HUB_UNINITIALIZED;
+
+	INIT_DELAYED_WORK(&hub->update_work, ssam_hub_update_workfn);
+
+	ssam_device_set_drvdata(sdev, hub);
+
+	status = ssam_device_notifier_register(sdev, &hub->notif);
+	if (status)
+		return status;
+
+	schedule_delayed_work(&hub->update_work, 0);
+	return 0;
+}
+
+static void ssam_hub_remove(struct ssam_device *sdev)
+{
+	struct ssam_hub *hub = ssam_device_get_drvdata(sdev);
+
+	ssam_device_notifier_unregister(sdev, &hub->notif);
+	cancel_delayed_work_sync(&hub->update_work);
+	ssam_remove_clients(&sdev->dev);
+}
+
+
+/* -- SSAM base-hub driver. ------------------------------------------------- */
+
+/*
+ * Some devices (especially battery) may need a bit of time to be fully usable
+ * after being (re-)connected. This delay has been determined via
+ * experimentation.
+ */
+#define SSAM_BASE_UPDATE_CONNECT_DELAY		msecs_to_jiffies(2500)
+
 SSAM_DEFINE_SYNC_REQUEST_R(ssam_bas_query_opmode, u8, {
 	.target_category = SSAM_SSH_TC_BAS,
 	.target_id       = 0x01,
@@ -342,7 +471,7 @@ SSAM_DEFINE_SYNC_REQUEST_R(ssam_bas_query_opmode, u8, {
 #define SSAM_BAS_OPMODE_TABLET		0x00
 #define SSAM_EVENT_BAS_CID_CONNECTION	0x0c
 
-static int ssam_base_hub_query_state(struct ssam_base_hub *hub, enum ssam_base_hub_state *state)
+static int ssam_base_hub_query_state(struct ssam_hub *hub, enum ssam_hub_state *state)
 {
 	u8 opmode;
 	int status;
@@ -354,62 +483,16 @@ static int ssam_base_hub_query_state(struct ssam_base_hub *hub, enum ssam_base_h
 	}
 
 	if (opmode != SSAM_BAS_OPMODE_TABLET)
-		*state = SSAM_BASE_HUB_CONNECTED;
+		*state = SSAM_HUB_CONNECTED;
 	else
-		*state = SSAM_BASE_HUB_DISCONNECTED;
+		*state = SSAM_HUB_DISCONNECTED;
 
 	return 0;
 }
 
-static ssize_t ssam_base_hub_state_show(struct device *dev, struct device_attribute *attr,
-					char *buf)
-{
-	struct ssam_base_hub *hub = dev_get_drvdata(dev);
-	bool connected = hub->state == SSAM_BASE_HUB_CONNECTED;
-
-	return sysfs_emit(buf, "%d\n", connected);
-}
-
-static struct device_attribute ssam_base_hub_attr_state =
-	__ATTR(state, 0444, ssam_base_hub_state_show, NULL);
-
-static struct attribute *ssam_base_hub_attrs[] = {
-	&ssam_base_hub_attr_state.attr,
-	NULL,
-};
-
-static const struct attribute_group ssam_base_hub_group = {
-	.attrs = ssam_base_hub_attrs,
-};
-
-static void ssam_base_hub_update_workfn(struct work_struct *work)
-{
-	struct ssam_base_hub *hub = container_of(work, struct ssam_base_hub, update_work.work);
-	struct fwnode_handle *node = dev_fwnode(&hub->sdev->dev);
-	enum ssam_base_hub_state state;
-	int status = 0;
-
-	status = ssam_base_hub_query_state(hub, &state);
-	if (status)
-		return;
-
-	if (hub->state == state)
-		return;
-	hub->state = state;
-
-	if (hub->state == SSAM_BASE_HUB_CONNECTED)
-		status = ssam_hub_register_clients(&hub->sdev->dev, hub->sdev->ctrl, node);
-	else
-		ssam_remove_clients(&hub->sdev->dev);
-
-	if (status)
-		dev_err(&hub->sdev->dev, "failed to update base-hub devices: %d\n", status);
-}
-
 static u32 ssam_base_hub_notif(struct ssam_event_notifier *nf, const struct ssam_event *event)
 {
-	struct ssam_base_hub *hub = container_of(nf, struct ssam_base_hub, notif);
-	unsigned long delay;
+	struct ssam_hub *hub = container_of(nf, struct ssam_hub, notif);
 
 	if (event->command_id != SSAM_EVENT_BAS_CID_CONNECTION)
 		return 0;
@@ -419,13 +502,7 @@ static u32 ssam_base_hub_notif(struct ssam_event_notifier *nf, const struct ssam
 		return 0;
 	}
 
-	/*
-	 * Delay update when the base is being connected to give devices/EC
-	 * some time to set up.
-	 */
-	delay = event->data[0] ? SSAM_BASE_UPDATE_CONNECT_DELAY : 0;
-
-	schedule_delayed_work(&hub->update_work, delay);
+	ssam_hub_update(hub, event->data[0]);
 
 	/*
 	 * Do not return SSAM_NOTIF_HANDLED: The event should be picked up and
@@ -435,27 +512,14 @@ static u32 ssam_base_hub_notif(struct ssam_event_notifier *nf, const struct ssam
 	return 0;
 }
 
-static int __maybe_unused ssam_base_hub_resume(struct device *dev)
-{
-	struct ssam_base_hub *hub = dev_get_drvdata(dev);
-
-	schedule_delayed_work(&hub->update_work, 0);
-	return 0;
-}
-static SIMPLE_DEV_PM_OPS(ssam_base_hub_pm_ops, NULL, ssam_base_hub_resume);
-
 static int ssam_base_hub_probe(struct ssam_device *sdev)
 {
-	struct ssam_base_hub *hub;
-	int status;
+	struct ssam_hub *hub;
 
 	hub = devm_kzalloc(&sdev->dev, sizeof(*hub), GFP_KERNEL);
 	if (!hub)
 		return -ENOMEM;
 
-	hub->sdev = sdev;
-	hub->state = SSAM_BASE_HUB_UNINITIALIZED;
-
 	hub->notif.base.priority = INT_MAX;  /* This notifier should run first. */
 	hub->notif.base.fn = ssam_base_hub_notif;
 	hub->notif.event.reg = SSAM_EVENT_REGISTRY_SAM;
@@ -464,37 +528,10 @@ static int ssam_base_hub_probe(struct ssam_device *sdev)
 	hub->notif.event.mask = SSAM_EVENT_MASK_NONE;
 	hub->notif.event.flags = SSAM_EVENT_SEQUENCED;
 
-	INIT_DELAYED_WORK(&hub->update_work, ssam_base_hub_update_workfn);
-
-	ssam_device_set_drvdata(sdev, hub);
-
-	status = ssam_device_notifier_register(sdev, &hub->notif);
-	if (status)
-		return status;
-
-	status = sysfs_create_group(&sdev->dev.kobj, &ssam_base_hub_group);
-	if (status)
-		goto err;
-
-	schedule_delayed_work(&hub->update_work, 0);
-	return 0;
+	hub->connect_delay = SSAM_BASE_UPDATE_CONNECT_DELAY;
+	hub->get_state = ssam_base_hub_query_state;
 
-err:
-	ssam_device_notifier_unregister(sdev, &hub->notif);
-	cancel_delayed_work_sync(&hub->update_work);
-	ssam_remove_clients(&sdev->dev);
-	return status;
-}
-
-static void ssam_base_hub_remove(struct ssam_device *sdev)
-{
-	struct ssam_base_hub *hub = ssam_device_get_drvdata(sdev);
-
-	sysfs_remove_group(&sdev->dev.kobj, &ssam_base_hub_group);
-
-	ssam_device_notifier_unregister(sdev, &hub->notif);
-	cancel_delayed_work_sync(&hub->update_work);
-	ssam_remove_clients(&sdev->dev);
+	return ssam_hub_setup(sdev, hub);
 }
 
 static const struct ssam_device_id ssam_base_hub_match[] = {
@@ -504,12 +541,12 @@ static const struct ssam_device_id ssam_base_hub_match[] = {
 
 static struct ssam_device_driver ssam_base_hub_driver = {
 	.probe = ssam_base_hub_probe,
-	.remove = ssam_base_hub_remove,
+	.remove = ssam_hub_remove,
 	.match_table = ssam_base_hub_match,
 	.driver = {
 		.name = "surface_aggregator_base_hub",
 		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
-		.pm = &ssam_base_hub_pm_ops,
+		.pm = &ssam_hub_pm_ops,
 	},
 };
 
-- 
2.36.1

[PATCH v2 10/12] platform/surface: aggregator_registry: Change device ID for base hub

[Maximilian Luz]

Use the target category of the (base) hub as instance id in the
(virtual) hub device UID. This makes association of the hub with the
respective subsystem easier.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
---

Changes in v2:
  - Introduce this patch to improve hub device UID consistency.

---
 drivers/platform/surface/surface_aggregator_registry.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c
index 09cbeee2428b..b11ce87c7184 100644
--- a/drivers/platform/surface/surface_aggregator_registry.c
+++ b/drivers/platform/surface/surface_aggregator_registry.c
@@ -43,7 +43,7 @@ static const struct software_node ssam_node_root = {
 
 /* Base device hub (devices attached to Surface Book 3 base). */
 static const struct software_node ssam_node_hub_base = {
-	.name = "ssam:00:00:02:00:00",
+	.name = "ssam:00:00:02:11:00",
 	.parent = &ssam_node_root,
 };
 
@@ -535,7 +535,7 @@ static int ssam_base_hub_probe(struct ssam_device *sdev)
 }
 
 static const struct ssam_device_id ssam_base_hub_match[] = {
-	{ SSAM_VDEV(HUB, 0x02, SSAM_ANY_IID, 0x00) },
+	{ SSAM_VDEV(HUB, 0x02, SSAM_SSH_TC_BAS, 0x00) },
 	{ },
 };
 
-- 
2.36.1

[PATCH v2 11/12] platform/surface: aggregator_registry: Add KIP device hub

[Maximilian Luz]

Add a Surface System Aggregator Module (SSAM) client device hub for
hot-removable devices managed via the KIP subsystem.

The KIP subsystem (full name unknown, abbreviation has been obtained
through reverse engineering) is a subsystem that manages hot-removable
SSAM client devices. Specifically, it manages HID input devices
contained in the detachable keyboard cover of the Surface Pro 8 and
Surface Pro X.

The KIP subsystem handles a single group of devices (e.g. all devices
contained in the keyboard cover) and cannot handle devices individually.
Thus we model it as a client device hub, which (hot-)removes all devices
contained under it once removal of the hub (e.g. keyboard cover) has
been detected and (re-)adds all devices once the physical hub device has
been (re-)attached. To do this, use the previously generified SSAM
subsystem hub framework.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
---

Changes in v2:
  - Change KIP hub device UID to improve consistency.

---
 .../surface/surface_aggregator_registry.c     | 103 +++++++++++++++++-
 1 file changed, 101 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c
index b11ce87c7184..f15cef60630f 100644
--- a/drivers/platform/surface/surface_aggregator_registry.c
+++ b/drivers/platform/surface/surface_aggregator_registry.c
@@ -551,6 +551,93 @@ static struct ssam_device_driver ssam_base_hub_driver = {
 };
 
 
+/* -- SSAM KIP-subsystem hub driver. ---------------------------------------- */
+
+/*
+ * Some devices may need a bit of time to be fully usable after being
+ * (re-)connected. This delay has been determined via experimentation.
+ */
+#define SSAM_KIP_UPDATE_CONNECT_DELAY		msecs_to_jiffies(250)
+
+#define SSAM_EVENT_KIP_CID_CONNECTION		0x2c
+
+SSAM_DEFINE_SYNC_REQUEST_R(__ssam_kip_get_connection_state, u8, {
+	.target_category = SSAM_SSH_TC_KIP,
+	.target_id       = 0x01,
+	.command_id      = 0x2c,
+	.instance_id     = 0x00,
+});
+
+static int ssam_kip_get_connection_state(struct ssam_hub *hub, enum ssam_hub_state *state)
+{
+	int status;
+	u8 connected;
+
+	status = ssam_retry(__ssam_kip_get_connection_state, hub->sdev->ctrl, &connected);
+	if (status < 0) {
+		dev_err(&hub->sdev->dev, "failed to query KIP connection state: %d\n", status);
+		return status;
+	}
+
+	*state = connected ? SSAM_HUB_CONNECTED : SSAM_HUB_DISCONNECTED;
+	return 0;
+}
+
+static u32 ssam_kip_hub_notif(struct ssam_event_notifier *nf, const struct ssam_event *event)
+{
+	struct ssam_hub *hub = container_of(nf, struct ssam_hub, notif);
+
+	if (event->command_id != SSAM_EVENT_KIP_CID_CONNECTION)
+		return 0;	/* Return "unhandled". */
+
+	if (event->length < 1) {
+		dev_err(&hub->sdev->dev, "unexpected payload size: %u\n", event->length);
+		return 0;
+	}
+
+	ssam_hub_update(hub, event->data[0]);
+	return SSAM_NOTIF_HANDLED;
+}
+
+static int ssam_kip_hub_probe(struct ssam_device *sdev)
+{
+	struct ssam_hub *hub;
+
+	hub = devm_kzalloc(&sdev->dev, sizeof(*hub), GFP_KERNEL);
+	if (!hub)
+		return -ENOMEM;
+
+	hub->notif.base.priority = INT_MAX;  /* This notifier should run first. */
+	hub->notif.base.fn = ssam_kip_hub_notif;
+	hub->notif.event.reg = SSAM_EVENT_REGISTRY_SAM;
+	hub->notif.event.id.target_category = SSAM_SSH_TC_KIP,
+	hub->notif.event.id.instance = 0,
+	hub->notif.event.mask = SSAM_EVENT_MASK_TARGET;
+	hub->notif.event.flags = SSAM_EVENT_SEQUENCED;
+
+	hub->connect_delay = SSAM_KIP_UPDATE_CONNECT_DELAY;
+	hub->get_state = ssam_kip_get_connection_state;
+
+	return ssam_hub_setup(sdev, hub);
+}
+
+static const struct ssam_device_id ssam_kip_hub_match[] = {
+	{ SSAM_VDEV(HUB, 0x01, SSAM_SSH_TC_KIP, 0x00) },
+	{ },
+};
+
+static struct ssam_device_driver ssam_kip_hub_driver = {
+	.probe = ssam_kip_hub_probe,
+	.remove = ssam_hub_remove,
+	.match_table = ssam_kip_hub_match,
+	.driver = {
+		.name = "surface_kip_hub",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+		.pm = &ssam_hub_pm_ops,
+	},
+};
+
+
 /* -- SSAM platform/meta-hub driver. ---------------------------------------- */
 
 static const struct acpi_device_id ssam_platform_hub_match[] = {
@@ -673,18 +760,30 @@ static int __init ssam_device_hub_init(void)
 
 	status = platform_driver_register(&ssam_platform_hub_driver);
 	if (status)
-		return status;
+		goto err_platform;
 
 	status = ssam_device_driver_register(&ssam_base_hub_driver);
 	if (status)
-		platform_driver_unregister(&ssam_platform_hub_driver);
+		goto err_base;
+
+	status = ssam_device_driver_register(&ssam_kip_hub_driver);
+	if (status)
+		goto err_kip;
 
+	return 0;
+
+err_kip:
+	ssam_device_driver_unregister(&ssam_base_hub_driver);
+err_base:
+	platform_driver_unregister(&ssam_platform_hub_driver);
+err_platform:
 	return status;
 }
 module_init(ssam_device_hub_init);
 
 static void __exit ssam_device_hub_exit(void)
 {
+	ssam_device_driver_unregister(&ssam_kip_hub_driver);
 	ssam_device_driver_unregister(&ssam_base_hub_driver);
 	platform_driver_unregister(&ssam_platform_hub_driver);
 }
-- 
2.36.1

[PATCH v2 12/12] platform/surface: aggregator_registry: Add support for keyboard cover on Surface Pro 8

[Maximilian Luz]

Add support for the detachable keyboard cover on the Surface Pro 8.

The keyboard cover on the Surface Pro 8 is, unlike the keyboard covers
of earlier Surface Pro generations, handled via the Surface System
Aggregator Module (SSAM). The keyboard and touchpad (as well as other
HID input devices) of this cover are standard SSAM HID client devices
(just like keyboard and touchpad on e.g. the Surface Laptop 3 and 4),
however, some care needs to be taken as they can be physically detached
(similarly to the Surface Book 3). Specifically, the respective SSAM
client devices need to be removed when the keyboard cover has been
detached and (re-)initialized when the keyboard cover has been
(re-)attached.

On the Surface Pro 8, detachment of the keyboard cover (and by extension
its devices) is managed via the KIP subsystem. Therefore, said devices
need to be registered under the KIP device hub, which in turn will
remove and re-create/re-initialize those devices as needed.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
---

Changes in v2:
  - Change order of KIP and BAS hub definitions to reflect IDs.

---
 .../surface/surface_aggregator_registry.c     | 37 ++++++++++++++++++-
 1 file changed, 36 insertions(+), 1 deletion(-)

diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c
index f15cef60630f..bf3303f1aa71 100644
--- a/drivers/platform/surface/surface_aggregator_registry.c
+++ b/drivers/platform/surface/surface_aggregator_registry.c
@@ -41,6 +41,12 @@ static const struct software_node ssam_node_root = {
 	.name = "ssam_platform_hub",
 };
 
+/* KIP device hub (connects keyboard cover devices on Surface Pro 8). */
+static const struct software_node ssam_node_hub_kip = {
+	.name = "ssam:00:00:01:0e:00",
+	.parent = &ssam_node_root,
+};
+
 /* Base device hub (devices attached to Surface Book 3 base). */
 static const struct software_node ssam_node_hub_base = {
 	.name = "ssam:00:00:02:11:00",
@@ -155,6 +161,30 @@ static const struct software_node ssam_node_hid_base_iid6 = {
 	.parent = &ssam_node_hub_base,
 };
 
+/* HID keyboard (KIP hub). */
+static const struct software_node ssam_node_hid_kip_keyboard = {
+	.name = "ssam:01:15:02:01:00",
+	.parent = &ssam_node_hub_kip,
+};
+
+/* HID pen stash (KIP hub; pen taken / stashed away evens). */
+static const struct software_node ssam_node_hid_kip_penstash = {
+	.name = "ssam:01:15:02:02:00",
+	.parent = &ssam_node_hub_kip,
+};
+
+/* HID touchpad (KIP hub). */
+static const struct software_node ssam_node_hid_kip_touchpad = {
+	.name = "ssam:01:15:02:03:00",
+	.parent = &ssam_node_hub_kip,
+};
+
+/* HID device instance 5 (KIP hub, unknown HID device). */
+static const struct software_node ssam_node_hid_kip_iid5 = {
+	.name = "ssam:01:15:02:05:00",
+	.parent = &ssam_node_hub_kip,
+};
+
 /*
  * Devices for 5th- and 6th-generations models:
  * - Surface Book 2,
@@ -230,10 +260,15 @@ static const struct software_node *ssam_node_group_sp7[] = {
 
 static const struct software_node *ssam_node_group_sp8[] = {
 	&ssam_node_root,
+	&ssam_node_hub_kip,
 	&ssam_node_bat_ac,
 	&ssam_node_bat_main,
 	&ssam_node_tmp_pprof,
-	/* TODO: Add support for keyboard cover. */
+	&ssam_node_hid_kip_keyboard,
+	&ssam_node_hid_kip_penstash,
+	&ssam_node_hid_kip_touchpad,
+	&ssam_node_hid_kip_iid5,
+	/* TODO: Add support for tablet mode switch. */
 	NULL,
 };
 
-- 
2.36.1

Re: [PATCH v2 00/12] platform/surface: aggregator: Add support for client hot-removal

[Hans de Goede]

Hi,

On 5/27/22 04:34, Maximilian Luz wrote:
> Summary:
> 
>   Add support for the HID type cover input devices on the Pro 8 and all
>   requirements for that.
> 
> 
> Blurb from v1:
> 
>   This series adds support for the type cover of the Surface Pro 8. On
>   the Pro 8, the type cover is (unlike on previous generations) handled
>   via the Surface System Aggregator Module (SSAM). As the type cover is
>   detachable, care needs to be taken and the respective SSAM (HID)
>   client devices need to be properly removed when detached and
>   re-initialized when attached.
>   
>   Therefore, this series does three things:
>   
>    1. Improve hot-removal support for SSAM client devices. When
>       hot-removing clients, subsequent communication may time out.
>   
>       In the worst case, this can lead to problems when devices are
>       detached and re-attached quickly, before we can remove their
>       respective kernel representations. This can then lead to devices
>       being in an uninitialized state, preventing, for example, touchpad
>       gestures from working properly as the required HID feature report
>       has not been sent.
>   
>       Therefore, handle hot-removal of devices more gracefully by
>       avoiding communication once it has been detected and ensure that
>       devices are actually removed.
>    
>    2. Generify SSAM subsystem hubs and add a KIP hub. On the Surface Pro
>       8, the KIP subsystem (only that abbreviation is known) is
>       responsible for managing type-cover devices. This hub acts as the
>       controller for device removal similar to the BAS (detachable base)
>       subsystem hub on the Surface Book 3 (therefore we can share most
>       of the code between them).
>   
>    3. Add the (HID) type-cover clients of the Surface Pro 8 to the
>       aggregator registry.
> 
> 
> Changes in v2:
> 
>  - Introduce "platform/surface: aggregator: Allow is_ssam_device() to be
>    used when CONFIG_SURFACE_AGGREGATOR_BUS is disabled" to fix an
>    undefined reference  build issue when CONFIG_SURFACE_AGGREGATOR_BUS
>    is disabled.
> 
>  - Make SSAM hub device UIDs consistent.
>     - Introduce "platform/surface: aggregator_registry: Change device ID
>       for base hub" to make association between hub and subsystem target
>       category more obvious.
>     - Change hub device ID for KIP subsystem hub to be consistent with
>       the id of the already existing BAS hub.

Thank you for your patch-series, I've applied the series to my
review-hans branch:
https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans

Once I've run some tests on this branch the patches there will be
added to the platform-drivers-x86/for-next branch and eventually
will be included in the pdx86 pull-request to Linus for the next
merge-window.

Jiri, Benjamin, note I've also taken the one small(ish) HID patch
which is a part of this series, despite it lacking an Ack from
either of you. I hope this is ok, if not let me know.

Regards,

Hans




> Maximilian Luz (12):
>   platform/surface: aggregator: Allow is_ssam_device() to be used when
>     CONFIG_SURFACE_AGGREGATOR_BUS is disabled
>   platform/surface: aggregator: Allow devices to be marked as
>     hot-removed
>   platform/surface: aggregator: Allow notifiers to avoid communication
>     on unregistering
>   platform/surface: aggregator_registry: Use client device wrappers for
>     notifier registration
>   power/supply: surface_charger: Use client device wrappers for notifier
>     registration
>   power/supply: surface_battery: Use client device wrappers for notifier
>     registration
>   HID: surface-hid: Add support for hot-removal
>   platform/surface: aggregator: Add comment for KIP subsystem category
>   platform/surface: aggregator_registry: Generify subsystem hub
>     functionality
>   platform/surface: aggregator_registry: Change device ID for base hub
>   platform/surface: aggregator_registry: Add KIP device hub
>   platform/surface: aggregator_registry: Add support for keyboard cover
>     on Surface Pro 8
> 
>  .../driver-api/surface_aggregator/client.rst  |   6 +-
>  drivers/hid/surface-hid/surface_hid_core.c    |  38 +-
>  .../platform/surface/aggregator/controller.c  |  53 ++-
>  .../surface/surface_aggregator_registry.c     | 403 +++++++++++++-----
>  drivers/power/supply/surface_battery.c        |   4 +-
>  drivers/power/supply/surface_charger.c        |   4 +-
>  include/linux/surface_aggregator/controller.h |  24 +-
>  include/linux/surface_aggregator/device.h     | 125 +++++-
>  include/linux/surface_aggregator/serial_hub.h |   2 +-
>  9 files changed, 513 insertions(+), 146 deletions(-)
> 

Re: [PATCH v2 00/12] platform/surface: aggregator: Add support for client hot-removal

[Benjamin Tissoires]

On 6/13/22 17:27, Hans de Goede wrote:
> Hi,
> 
> On 5/27/22 04:34, Maximilian Luz wrote:
>> Summary:
>>
>>    Add support for the HID type cover input devices on the Pro 8 and all
>>    requirements for that.
>>
>>
>> Blurb from v1:
>>
>>    This series adds support for the type cover of the Surface Pro 8. On
>>    the Pro 8, the type cover is (unlike on previous generations) handled
>>    via the Surface System Aggregator Module (SSAM). As the type cover is
>>    detachable, care needs to be taken and the respective SSAM (HID)
>>    client devices need to be properly removed when detached and
>>    re-initialized when attached.
>>    
>>    Therefore, this series does three things:
>>    
>>     1. Improve hot-removal support for SSAM client devices. When
>>        hot-removing clients, subsequent communication may time out.
>>    
>>        In the worst case, this can lead to problems when devices are
>>        detached and re-attached quickly, before we can remove their
>>        respective kernel representations. This can then lead to devices
>>        being in an uninitialized state, preventing, for example, touchpad
>>        gestures from working properly as the required HID feature report
>>        has not been sent.
>>    
>>        Therefore, handle hot-removal of devices more gracefully by
>>        avoiding communication once it has been detected and ensure that
>>        devices are actually removed.
>>     
>>     2. Generify SSAM subsystem hubs and add a KIP hub. On the Surface Pro
>>        8, the KIP subsystem (only that abbreviation is known) is
>>        responsible for managing type-cover devices. This hub acts as the
>>        controller for device removal similar to the BAS (detachable base)
>>        subsystem hub on the Surface Book 3 (therefore we can share most
>>        of the code between them).
>>    
>>     3. Add the (HID) type-cover clients of the Surface Pro 8 to the
>>        aggregator registry.
>>
>>
>> Changes in v2:
>>
>>   - Introduce "platform/surface: aggregator: Allow is_ssam_device() to be
>>     used when CONFIG_SURFACE_AGGREGATOR_BUS is disabled" to fix an
>>     undefined reference  build issue when CONFIG_SURFACE_AGGREGATOR_BUS
>>     is disabled.
>>
>>   - Make SSAM hub device UIDs consistent.
>>      - Introduce "platform/surface: aggregator_registry: Change device ID
>>        for base hub" to make association between hub and subsystem target
>>        category more obvious.
>>      - Change hub device ID for KIP subsystem hub to be consistent with
>>        the id of the already existing BAS hub.
> 
> Thank you for your patch-series, I've applied the series to my
> review-hans branch:
> https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans
> 
> Once I've run some tests on this branch the patches there will be
> added to the platform-drivers-x86/for-next branch and eventually
> will be included in the pdx86 pull-request to Linus for the next
> merge-window.
> 
> Jiri, Benjamin, note I've also taken the one small(ish) HID patch
> which is a part of this series, despite it lacking an Ack from
> either of you. I hope this is ok, if not let me know.

Sorry I am well behind on my patch processing.

The patch is simple enough and if you reviewed the rest, that is fine by me.

Just for the archives:
For the HID part
Acked-by: Benjamin Tissoires <benjamin.tisssoires@redhat.com>

(no need to force push your branch unless you think it's really 
important to have my ack).

Cheers,
Benjamin

> 
> Regards,
> 
> Hans
> 
> 
> 
> 
>> Maximilian Luz (12):
>>    platform/surface: aggregator: Allow is_ssam_device() to be used when
>>      CONFIG_SURFACE_AGGREGATOR_BUS is disabled
>>    platform/surface: aggregator: Allow devices to be marked as
>>      hot-removed
>>    platform/surface: aggregator: Allow notifiers to avoid communication
>>      on unregistering
>>    platform/surface: aggregator_registry: Use client device wrappers for
>>      notifier registration
>>    power/supply: surface_charger: Use client device wrappers for notifier
>>      registration
>>    power/supply: surface_battery: Use client device wrappers for notifier
>>      registration
>>    HID: surface-hid: Add support for hot-removal
>>    platform/surface: aggregator: Add comment for KIP subsystem category
>>    platform/surface: aggregator_registry: Generify subsystem hub
>>      functionality
>>    platform/surface: aggregator_registry: Change device ID for base hub
>>    platform/surface: aggregator_registry: Add KIP device hub
>>    platform/surface: aggregator_registry: Add support for keyboard cover
>>      on Surface Pro 8
>>
>>   .../driver-api/surface_aggregator/client.rst  |   6 +-
>>   drivers/hid/surface-hid/surface_hid_core.c    |  38 +-
>>   .../platform/surface/aggregator/controller.c  |  53 ++-
>>   .../surface/surface_aggregator_registry.c     | 403 +++++++++++++-----
>>   drivers/power/supply/surface_battery.c        |   4 +-
>>   drivers/power/supply/surface_charger.c        |   4 +-
>>   include/linux/surface_aggregator/controller.h |  24 +-
>>   include/linux/surface_aggregator/device.h     | 125 +++++-
>>   include/linux/surface_aggregator/serial_hub.h |   2 +-
>>   9 files changed, 513 insertions(+), 146 deletions(-)
>>
>