Re: Double tap to wake optionality

[David Heidelberg <david@ixit.cz>]

On 14/09/2026 01:33, Dmitry Torokhov wrote:
> Hi David,
> 
> On Mon, Sep 07, 2026 at 12:02:12AM +0200, David Heidelberg wrote:
>> Hello!
>>
>> Most of touchscreens has ability to jump into low power mode and get woken
>> up by gesture (such as double tap).
>>
>> I wonder about suggestion what property should drivers use to implement this
>> policy where driver doesn't have to jump into low-power mode but completely
>> power-off (and save battery). My thinking was something such as
>>
>> /sys/class/input/inputX/gesture_to_wake
>> (while gesture sounds a bit weird, it seems that TS are capable to recognize
>> different patterns, not only double-tap).
>>
>>
>>                      userspace
>>                         │
>>                         │ gesture_to_wake = 1
>>                         ▼
>>                touchscreen driver
>>                         │
>>            ┌────────────┴────────────┐
>>            │                         │
>>         gesture ON               gesture OFF
>>            │                         │
>>            ▼                         ▼
>>     low-power TS mode          complete power-off
>>            │
>>            ▼
>>       IRQ configured
>>       as wake source
> 
> How is it different from the power/wakeup device attribute? Device's
> suspend  routines check device_may_wakeup() and then either completely
> power off controllers or configure them for wake up.

Hi Dmitry.

You're right. I tried to experiment with tap to wake and in general I it's as 
you say.

No need for extra option, so far I do something like:

    wakeup-source;

    event-tap-double {
            linux,code = <KEY_WAKEUP>;
    };

and adding another gesture_input device to the existing input. Then send all 
these events to the gesture_input when the main touchscreen is no longer active.

Some of the thoughts are here:

https://gitlab.gnome.org/World/Phosh/meta-phosh/-/work_items/43

Thanks
David

P.S. There was some discussion in the ML about letting panel blank and 
toucscreehn interact, but I cannot find it.

Having the handling of the panel off -> TS autosuspend workflow in the kernel 
would be pretty nice.

> 
> How exactly wakeup is handled - any touch, or double-tap, or something
> else - is up to the controller and its firmware.
> 
> Thanks.
>