linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Osipenko <digetx@gmail.com>
To: Jiada Wang <jiada_wang@mentor.com>,
	nick@shmanahar.org, dmitry.torokhov@gmail.com, jikos@kernel.org,
	benjamin.tissoires@redhat.com, bsz@semihalf.com
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
	erosca@de.adit-jv.com, Andrew_Gabbasov@mentor.com
Subject: Re: [PATCH v11 33/56] Input: atmel_mxt_ts - delay enabling IRQ when not using regulators
Date: Mon, 11 May 2020 04:05:00 +0300	[thread overview]
Message-ID: <3a942afa-c047-2c88-1c8e-a90fa018738e@gmail.com> (raw)
In-Reply-To: <20200508055656.96389-34-jiada_wang@mentor.com>

08.05.2020 08:56, Jiada Wang пишет:
> The path of enabling the IRQ in the probe function is not safe in level
> triggered operation, if it was already powered up and there is a message
> waiting on the device (eg finger down) because the object table has not yet
> been read. This forces the ISR into a hard loop.
> 
> Delay enabling the interrupt until it is first needed, by set flag
> IRQ_NOAUTOEN.
> 
> Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
> CC: Dmitry Osipenko <digetx@gmail.com>
> ---
>  drivers/input/touchscreen/atmel_mxt_ts.c | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
> index 7c9a738e633a..ab4eceac8fe7 100644
> --- a/drivers/input/touchscreen/atmel_mxt_ts.c
> +++ b/drivers/input/touchscreen/atmel_mxt_ts.c
> @@ -3822,6 +3822,7 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
>  		return error;
>  	}
>  
> +	irq_set_status_flags(client->irq, IRQ_NOAUTOEN);
>  	error = devm_request_threaded_irq(&client->dev, client->irq,
>  					  NULL, mxt_interrupt, IRQF_ONESHOT,
>  					  client->name, data);
> @@ -3831,17 +3832,19 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
>  	}
>  
>  	if (data->suspend_mode == MXT_SUSPEND_REGULATOR) {
> +		enable_irq(data->irq);

Hello Jiada,

This change contradicts to the commit's message since enabling IRQ until
hardware has been fully powered-on and reset is not allowed.

>  		error = mxt_probe_regulators(data);
>  		if (error)
>  			return error;
> +
> +		disable_irq(data->irq);
>  	} else if (data->reset_gpio) {
>  		msleep(MXT_RESET_GPIO_TIME);
>  		gpiod_set_value(data->reset_gpio, 1);
>  		msleep(MXT_RESET_INVALID_CHG);
>  	}
>  
> -	disable_irq(data->irq);
> -
>  	error = mxt_initialize(data);
>  	if (error)
>  		return error;
> 

Secondly, I gave a try to this version of the series and unfortunately
it doesn't work at all:

[  125.928709] INFO: task systemd-udevd:184 blocked for more than 61
seconds.
[  125.929130]       Not tainted
5.7.0-rc4-next-20200508-00189-g0fe7f91d4a66-dirty #2206
[  125.929474] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
disables this message.
[  125.929900] systemd-udevd   D    0   184    173 0x00000080
[  125.929921] [<c098b995>] (__schedule) from [<c098bdc1>]
(schedule+0x65/0xc0)
[  125.929965] [<c098bdc1>] (schedule) from [<c0166ce3>]
(synchronize_irq+0x5b/0x7c)
[  125.930001] [<c0166ce3>] (synchronize_irq) from [<c067e0f9>]
(mxt_stop+0x51/0xe0)
[  125.930016] [<c067e0f9>] (mxt_stop) from [<c067e1d3>]
(mxt_input_close+0x13/0x34)
[  125.930042] [<c067e1d3>] (mxt_input_close) from [<c0664b19>]
(input_close_device+0x3d/0x5c)
[  125.930063] [<c0664b19>] (input_close_device) from [<c066b9df>]
(evdev_release+0xa7/0xbc)
[  125.930088] [<c066b9df>] (evdev_release) from [<c025a871>]
(__fput+0x91/0x198)
[  125.930121] [<c025a871>] (__fput) from [<c0136efb>]
(task_work_run+0x73/0x90)
[  125.930138] [<c0136efb>] (task_work_run) from [<c0108fa9>]
(do_work_pending+0x381/0x430)
[  125.930149] [<c0108fa9>] (do_work_pending) from [<c01000d1>]
(slow_work_pending+0x9/0x18)
[  125.930153] Exception stack(0xedd0ffb0 to 0xedd0fff8)

Please test everything properly and fix it in the next version.

BTW, it won't hurt to apply a spell-checker to the commit messages to
fix small typos.

  reply	other threads:[~2020-05-11  1:05 UTC|newest]

Thread overview: 80+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-08  5:56 [PATCH v11 00/56] atmel_mxt_ts misc Jiada Wang
2020-05-08  5:56 ` [PATCH v11 01/56] Input: introduce input_mt_report_slot_inactive Jiada Wang
2020-05-08  5:56 ` [PATCH v11 02/56] Input: atmel_mxt_ts - rework sysfs init/remove Jiada Wang
2020-05-08  5:56 ` [PATCH v11 03/56] Input: atmel_mxt_ts - only read messages in mxt_acquire_irq() when necessary Jiada Wang
2020-05-08  5:56 ` [PATCH v11 04/56] Input: atmel_mxt_ts - split large i2c transfers into blocks Jiada Wang
2020-05-11 22:19   ` Dmitry Torokhov
2020-06-30 14:33     ` Wang, Jiada
2020-05-08  5:56 ` [PATCH v11 05/56] Input: atmel_mxt_ts - output status from T48 Noise Supression Jiada Wang
2020-05-11 22:23   ` Dmitry Torokhov
2020-06-30 14:34     ` Wang, Jiada
2020-05-08  5:56 ` [PATCH v11 06/56] Input: atmel_mxt_ts - output status from T42 Touch Suppression Jiada Wang
2020-05-08  5:56 ` [PATCH v11 07/56] Input: atmel_mxt_ts - implement T9 vector/orientation support Jiada Wang
2020-05-11 22:53   ` Dmitry Torokhov
2020-06-30 14:35     ` Wang, Jiada
2020-05-08  5:56 ` [PATCH v11 08/56] Input: atmel_mxt_ts - implement T15 Key Array support Jiada Wang
2020-05-12  2:35   ` Dmitry Torokhov
2020-05-08  5:56 ` [PATCH v11 09/56] Input: atmel_mxt_ts - handle reports from T47 Stylus object Jiada Wang
2020-05-08  5:56 ` [PATCH v11 10/56] Input: atmel_mxt_ts - implement support for T107 active stylus Jiada Wang
2020-05-08  5:56 ` [PATCH v11 11/56] Input: atmel_mxt_ts - add debug for T92 gesture and T93 touch seq msgs Jiada Wang
2020-05-08  5:56 ` [PATCH v11 12/56] Input: atmel_mxt_ts - release touch state during suspend Jiada Wang
2020-05-08  5:56 ` [PATCH v11 13/56] dt-bindings: input: atmel: add suspend mode support Jiada Wang
2020-05-08  5:56 ` [PATCH v11 14/56] Input: atmel_mxt_ts - add regulator control support Jiada Wang
2020-05-08  5:56 ` [PATCH v11 15/56] Input: atmel_mxt_ts - report failures in suspend/resume Jiada Wang
2020-05-08  5:56 ` [PATCH v11 16/56] Input: atmel_mxt_ts - allow specification of firmware file name Jiada Wang
2020-05-08  5:56 ` [PATCH v11 17/56] Input: atmel_mxt_ts: Rename mxt_fw_version_show to fw_version_show Jiada Wang
2020-05-08  5:56 ` [PATCH v11 18/56] Input: atmel_mxt_ts: Rename mxt_hw_version_show to hw_version_show Jiada Wang
2020-05-08  5:56 ` [PATCH v11 19/56] Input: atmel_mxt_ts: rename mxt_update_fw_store to update_fw_store Jiada Wang
2020-05-08  5:56 ` [PATCH v11 20/56] Input: atmel_mxt_ts - handle cfg filename via pdata/sysfs Jiada Wang
2020-05-08  5:56 ` [PATCH v11 21/56] Input: atmel_mxt_ts - check data->input_dev is not null in mxt_input_sync() Jiada Wang
2020-05-08  5:56 ` [PATCH v11 22/56] dt-bindings: input: atmel: provide name of configuration file Jiada Wang
2020-05-08  5:56 ` [PATCH v11 23/56] Input: atmel_mxt_ts - allow input name to be specified in platform data Jiada Wang
2020-05-08  5:56 ` [PATCH v11 24/56] dt-bindings: input: atmel: support to specify input name Jiada Wang
2020-05-08  5:56 ` [PATCH v11 25/56] Input: atmel_mxt_ts - add config checksum attribute to sysfs Jiada Wang
2020-05-08  5:56 ` [PATCH v11 26/56] Input: atmel_mxt_ts - rename mxt_object_show to object_show Jiada Wang
2020-05-08  5:56 ` [PATCH v11 27/56] Input: atmel_mxt_ts - refactor firmware flash to extract context into struct Jiada Wang
2020-05-08  5:56 ` [PATCH v11 28/56] Input: atmel_mxt_ts - refactor code to enter bootloader into separate func Jiada Wang
2020-05-08  5:56 ` [PATCH v11 29/56] Input: atmel_mxt_ts - combine bootloader version query with probe Jiada Wang
2020-05-08  5:56 ` [PATCH v11 30/56] Input: atmel_mxt_ts - improve bootloader state machine handling Jiada Wang
2020-05-08  5:56 ` [PATCH v11 31/56] Input: atmel_mxt_ts - rename bl_completion to chg_completion Jiada Wang
2020-05-08  5:56 ` [PATCH v11 32/56] Input: atmel_mxt_ts - make bootloader interrupt driven Jiada Wang
2020-05-08  5:56 ` [PATCH v11 33/56] Input: atmel_mxt_ts - delay enabling IRQ when not using regulators Jiada Wang
2020-05-11  1:05   ` Dmitry Osipenko [this message]
2020-05-11  2:05     ` Wang, Jiada
2020-05-11 23:13       ` Dmitry Osipenko
2020-05-13  5:07         ` Wang, Jiada
2020-05-14  4:53           ` Dmitry Osipenko
2020-05-17  3:32             ` Wang, Jiada
2020-05-17 13:08               ` Dmitry Osipenko
2020-05-17 13:26                 ` Dmitry Osipenko
2020-05-25 14:51                   ` Wang, Jiada
2020-05-26 17:36                     ` Dmitry Osipenko
2020-05-08  5:56 ` [PATCH v11 34/56] Input: atmel_mxt_ts - implement I2C retries Jiada Wang
2020-05-08  5:56 ` [PATCH v11 35/56] Input: atmel_mxt_ts - orientation is not present in hover Jiada Wang
2020-05-08  5:56 ` [PATCH v11 36/56] Input: atmel_mxt_ts - implement debug output for messages Jiada Wang
2020-05-08  5:56 ` [PATCH v11 37/56] Input: atmel_mxt_ts - implement improved debug message interface Jiada Wang
2020-05-08  5:56 ` [PATCH v11 38/56] Input: atmel_mxt_ts - eliminate data->raw_info_block Jiada Wang
2020-05-08  5:56 ` [PATCH v11 39/56] Input: atmel_mxt_ts - Change call-points of mxt_free_* functions Jiada Wang
2020-05-08  5:56 ` [PATCH v11 40/56] Input: atmel_mxt_ts - rely on calculated_crc rather than file config_crc Jiada Wang
2020-05-08  5:56 ` [PATCH v11 41/56] input: atmel_mxt_ts: export GPIO reset line via sysfs Jiada Wang
2020-05-08  5:56 ` [PATCH v11 42/56] input: atmel_mxt_ts: Add Missing Delay for reset handling of Atmel touch panel controller in detachable displays Jiada Wang
2020-05-08  5:56 ` [PATCH v11 43/56] Input: atmel_mxt_ts: Add support for run self-test routine Jiada Wang
2020-05-08  5:56 ` [PATCH v11 44/56] Input: atmel_mxt_ts: Limit the max bytes transferred in an i2c transaction Jiada Wang
2020-05-08  5:56 ` [PATCH v11 45/56] Input: atmel_mxt_ts: return error from mxt_process_messages_until_invalid() Jiada Wang
2020-05-08  5:56 ` [PATCH v11 46/56] Input: Atmel: improve error handling in mxt_start() Jiada Wang
2020-05-08  5:56 ` [PATCH v11 47/56] Input: Atmel: improve error handling in mxt_initialize() Jiada Wang
2020-05-08  5:56 ` [PATCH v11 48/56] Input: Atmel: improve error handling in mxt_update_cfg() Jiada Wang
2020-05-08  5:56 ` [PATCH v11 49/56] Input: Atmel: Improve error handling in mxt_initialize_input_device() Jiada Wang
2020-05-08  5:56 ` [PATCH v11 50/56] Input: Atmel: handle ReportID "0x00" while processing T5 messages Jiada Wang
2020-05-08  5:56 ` [PATCH v11 51/56] Input: Atmel: use T44 object to process " Jiada Wang
2020-05-08  5:56 ` [PATCH v11 52/56] Input: atmel_mxt_ts: use gpiod_set_value_cansleep for reset pin Jiada Wang
2020-05-08  5:56 ` [PATCH v11 53/56] input: touchscreen: atmel_mxt_ts: Added sysfs entry for touchscreen status Jiada Wang
2020-05-08  5:56 ` [PATCH v11 54/56] input: atmel_mxt_ts: added sysfs interface to update atmel T38 data Jiada Wang
2020-05-10 12:03   ` kbuild test robot
2020-05-08  5:56 ` [PATCH v11 55/56] input: atmel_mxt_ts: don't disable IRQ before remove of mxt_fw_attr_group Jiada Wang
2020-05-08  5:56 ` [PATCH v11 56/56] Input: atmel_mxt_ts - Fix compilation warning Jiada Wang
2020-05-24 21:28 ` [PATCH v11 00/56] atmel_mxt_ts misc Pavel Machek
2020-05-27  6:43 ` Dmitry Torokhov
2020-06-25 13:50   ` Wang, Jiada
2020-07-08 13:05     ` Wang, Jiada
2020-07-17  7:21       ` Wang, Jiada

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3a942afa-c047-2c88-1c8e-a90fa018738e@gmail.com \
    --to=digetx@gmail.com \
    --cc=Andrew_Gabbasov@mentor.com \
    --cc=benjamin.tissoires@redhat.com \
    --cc=bsz@semihalf.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=erosca@de.adit-jv.com \
    --cc=jiada_wang@mentor.com \
    --cc=jikos@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nick@shmanahar.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).