linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hans de Goede <hansg@kernel.org>
To: Mario Limonciello <superm1@kernel.org>,
	Mika Westerberg <westeri@kernel.org>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <brgl@bgdev.pl>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: "open list:GPIO ACPI SUPPORT" <linux-gpio@vger.kernel.org>,
	"open list:GPIO ACPI SUPPORT" <linux-acpi@vger.kernel.org>,
	open list <linux-kernel@vger.kernel.org>,
	"open list:INPUT (KEYBOARD, MOUSE, JOYSTICK,
	TOUCHSCREEN)..." <linux-input@vger.kernel.org>,
	Mario Limonciello <mario.limonciello@amd.com>
Subject: Re: [PATCH v2 1/3] gpiolib: acpi: Add a helper for programming debounce
Date: Wed, 25 Jun 2025 20:58:05 +0200	[thread overview]
Message-ID: <3ec49306-a21b-4f2a-b224-994f323148ab@kernel.org> (raw)
In-Reply-To: <20250625181342.3175969-2-superm1@kernel.org>

Hi,

On 25-Jun-25 8:13 PM, Mario Limonciello wrote:
> From: Mario Limonciello <mario.limonciello@amd.com>
> 
> Debounce is programmed in two places and considered non-fatal in one of
> them. Introduce a helper for programming debounce and show a warning
> when failing to program.  This is a difference in behavior for the call
> in acpi_dev_gpio_irq_wake_get_by().
> 
> Cc: Hans de Goede <hansg@kernel.org>
> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>

Thanks, patch looks good to me:

Reviewed-by: Hans de Goede <hansg@kernel.org>

Regards,

Hans



> ---
>  drivers/gpio/gpiolib-acpi-core.c | 24 +++++++++++++-----------
>  1 file changed, 13 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/gpio/gpiolib-acpi-core.c b/drivers/gpio/gpiolib-acpi-core.c
> index 12b24a717e43f..1895e45bd9f16 100644
> --- a/drivers/gpio/gpiolib-acpi-core.c
> +++ b/drivers/gpio/gpiolib-acpi-core.c
> @@ -291,6 +291,17 @@ acpi_gpio_to_gpiod_flags(const struct acpi_resource_gpio *agpio, int polarity)
>  	return GPIOD_ASIS;
>  }
>  
> +static void acpi_set_debounce_timeout(struct gpio_desc *desc, unsigned int timeout)
> +{
> +	int ret;
> +
> +	/* ACPI uses hundredths of milliseconds units */
> +	ret = gpio_set_debounce_timeout(desc, timeout * 10);
> +	if (ret)
> +		dev_warn(&desc->gdev->dev,
> +			 "Failed to set debounce-timeout: %d\n", ret);
> +}
> +
>  static struct gpio_desc *acpi_request_own_gpiod(struct gpio_chip *chip,
>  						struct acpi_resource_gpio *agpio,
>  						unsigned int index,
> @@ -300,18 +311,12 @@ static struct gpio_desc *acpi_request_own_gpiod(struct gpio_chip *chip,
>  	enum gpiod_flags flags = acpi_gpio_to_gpiod_flags(agpio, polarity);
>  	unsigned int pin = agpio->pin_table[index];
>  	struct gpio_desc *desc;
> -	int ret;
>  
>  	desc = gpiochip_request_own_desc(chip, pin, label, polarity, flags);
>  	if (IS_ERR(desc))
>  		return desc;
>  
> -	/* ACPI uses hundredths of milliseconds units */
> -	ret = gpio_set_debounce_timeout(desc, agpio->debounce_timeout * 10);
> -	if (ret)
> -		dev_warn(chip->parent,
> -			 "Failed to set debounce-timeout for pin 0x%04X, err %d\n",
> -			 pin, ret);
> +	acpi_set_debounce_timeout(desc, agpio->debounce_timeout);
>  
>  	return desc;
>  }
> @@ -1025,10 +1030,7 @@ int acpi_dev_gpio_irq_wake_get_by(struct acpi_device *adev, const char *con_id,
>  			if (ret < 0)
>  				return ret;
>  
> -			/* ACPI uses hundredths of milliseconds units */
> -			ret = gpio_set_debounce_timeout(desc, info.debounce * 10);
> -			if (ret)
> -				return ret;
> +			acpi_set_debounce_timeout(desc, info.debounce);
>  
>  			irq_flags = acpi_dev_get_irq_type(info.triggering,
>  							  info.polarity);


  reply	other threads:[~2025-06-25 18:58 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-25 18:13 [PATCH v2 0/3] Fix soc-button-array debounce Mario Limonciello
2025-06-25 18:13 ` [PATCH v2 1/3] gpiolib: acpi: Add a helper for programming debounce Mario Limonciello
2025-06-25 18:58   ` Hans de Goede [this message]
2025-06-25 18:13 ` [PATCH v2 2/3] gpiolib: acpi: Program debounce when finding GPIO Mario Limonciello
2025-06-25 18:58   ` Hans de Goede
2025-06-25 18:13 ` [PATCH v2 3/3] Input: soc_button_array: Only debounce cherryview and baytrail systems Mario Limonciello
2025-06-25 19:03   ` Hans de Goede
2025-06-25 19:23     ` Mario Limonciello
2025-06-25 19:42       ` Hans de Goede
2025-06-25 20:34         ` Mario Limonciello
2025-06-26 18:27           ` Dmitry Torokhov
2025-06-26 18:30             ` Mario Limonciello
2025-06-26 18:53               ` Dmitry Torokhov
2025-06-26 18:58                 ` Mario Limonciello
2025-06-26 19:04                 ` Hans de Goede
2025-06-26 19:32                   ` Dmitry Torokhov
2025-06-26 19:37                     ` Mario Limonciello
2025-06-26 19:54                       ` Dmitry Torokhov
2025-06-26 21:39                         ` Mario Limonciello
2025-06-27  5:08                           ` Dmitry Torokhov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3ec49306-a21b-4f2a-b224-994f323148ab@kernel.org \
    --to=hansg@kernel.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=brgl@bgdev.pl \
    --cc=dmitry.torokhov@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mario.limonciello@amd.com \
    --cc=superm1@kernel.org \
    --cc=westeri@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).