[PATCH AUTOSEL 6.1 23/29] Input: silead - Always support 10 fingers

[PATCH AUTOSEL 6.1 23/29] Input: silead - Always support 10 fingers

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 38a38f5a36da9820680d413972cb733349400532 ]

When support for Silead touchscreens was orginal added some touchscreens
with older firmware versions only supported 5 fingers and this was made
the default requiring the setting of a "silead,max-fingers=10" uint32
device-property for all touchscreen models which do support 10 fingers.

There are very few models with the old 5 finger fw, so in practice the
setting of the "silead,max-fingers=10" is boilerplate which needs to
be copy and pasted to every touchscreen config.

Reporting that 10 fingers are supported on devices which only support
5 fingers doesn't cause any problems for userspace in practice, since
at max 4 finger gestures are supported anyways. Drop the max_fingers
configuration and simply always assume 10 fingers.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20240525193854.39130-2-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/touchscreen/silead.c | 19 +++++--------------
 1 file changed, 5 insertions(+), 14 deletions(-)

diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c
index 3eef8c01090fd..30e15b6a93574 100644
--- a/drivers/input/touchscreen/silead.c
+++ b/drivers/input/touchscreen/silead.c
@@ -71,7 +71,6 @@ struct silead_ts_data {
 	struct regulator_bulk_data regulators[2];
 	char fw_name[64];
 	struct touchscreen_properties prop;
-	u32 max_fingers;
 	u32 chip_id;
 	struct input_mt_pos pos[SILEAD_MAX_FINGERS];
 	int slots[SILEAD_MAX_FINGERS];
@@ -136,7 +135,7 @@ static int silead_ts_request_input_dev(struct silead_ts_data *data)
 	touchscreen_parse_properties(data->input, true, &data->prop);
 	silead_apply_efi_fw_min_max(data);
 
-	input_mt_init_slots(data->input, data->max_fingers,
+	input_mt_init_slots(data->input, SILEAD_MAX_FINGERS,
 			    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED |
 			    INPUT_MT_TRACK);
 
@@ -256,10 +255,10 @@ static void silead_ts_read_data(struct i2c_client *client)
 		return;
 	}
 
-	if (buf[0] > data->max_fingers) {
+	if (buf[0] > SILEAD_MAX_FINGERS) {
 		dev_warn(dev, "More touches reported then supported %d > %d\n",
-			 buf[0], data->max_fingers);
-		buf[0] = data->max_fingers;
+			 buf[0], SILEAD_MAX_FINGERS);
+		buf[0] = SILEAD_MAX_FINGERS;
 	}
 
 	if (silead_ts_handle_pen_data(data, buf))
@@ -315,7 +314,6 @@ static void silead_ts_read_data(struct i2c_client *client)
 
 static int silead_ts_init(struct i2c_client *client)
 {
-	struct silead_ts_data *data = i2c_get_clientdata(client);
 	int error;
 
 	error = i2c_smbus_write_byte_data(client, SILEAD_REG_RESET,
@@ -325,7 +323,7 @@ static int silead_ts_init(struct i2c_client *client)
 	usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX);
 
 	error = i2c_smbus_write_byte_data(client, SILEAD_REG_TOUCH_NR,
-					data->max_fingers);
+					  SILEAD_MAX_FINGERS);
 	if (error)
 		goto i2c_write_err;
 	usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX);
@@ -591,13 +589,6 @@ static void silead_ts_read_props(struct i2c_client *client)
 	const char *str;
 	int error;
 
-	error = device_property_read_u32(dev, "silead,max-fingers",
-					 &data->max_fingers);
-	if (error) {
-		dev_dbg(dev, "Max fingers read error %d\n", error);
-		data->max_fingers = 5; /* Most devices handle up-to 5 fingers */
-	}
-
 	error = device_property_read_string(dev, "firmware-name", &str);
 	if (!error)
 		snprintf(data->fw_name, sizeof(data->fw_name),
-- 
2.43.0

Re: [PATCH AUTOSEL 6.1 23/29] Input: silead - Always support 10 fingers

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1065 bytes --]

Hi!

> From: Hans de Goede <hdegoede@redhat.com>
> 
> [ Upstream commit 38a38f5a36da9820680d413972cb733349400532 ]
> 
> When support for Silead touchscreens was orginal added some touchscreens
> with older firmware versions only supported 5 fingers and this was made
> the default requiring the setting of a "silead,max-fingers=10" uint32
> device-property for all touchscreen models which do support 10 fingers.
> 
> There are very few models with the old 5 finger fw, so in practice the
> setting of the "silead,max-fingers=10" is boilerplate which needs to
> be copy and pasted to every touchscreen config.
> 
> Reporting that 10 fingers are supported on devices which only support
> 5 fingers doesn't cause any problems for userspace in practice, since
> at max 4 finger gestures are supported anyways. Drop the max_fingers
> configuration and simply always assume 10 fingers.

This does not fix a serious bug, should not be in stable.

Best regards,
								Pavel
-- 
People of Russia, stop Putin before his war on Ukraine escalates.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

Re: [PATCH AUTOSEL 6.1 23/29] Input: silead - Always support 10 fingers

[Hans de Goede]

Hi Pavel,

On 7/10/24 11:58 AM, Pavel Machek wrote:
> Hi!
> 
>> From: Hans de Goede <hdegoede@redhat.com>
>>
>> [ Upstream commit 38a38f5a36da9820680d413972cb733349400532 ]
>>
>> When support for Silead touchscreens was orginal added some touchscreens
>> with older firmware versions only supported 5 fingers and this was made
>> the default requiring the setting of a "silead,max-fingers=10" uint32
>> device-property for all touchscreen models which do support 10 fingers.
>>
>> There are very few models with the old 5 finger fw, so in practice the
>> setting of the "silead,max-fingers=10" is boilerplate which needs to
>> be copy and pasted to every touchscreen config.
>>
>> Reporting that 10 fingers are supported on devices which only support
>> 5 fingers doesn't cause any problems for userspace in practice, since
>> at max 4 finger gestures are supported anyways. Drop the max_fingers
>> configuration and simply always assume 10 fingers.
> 
> This does not fix a serious bug, should not be in stable.

This patch is necessary for clean backporting of new DMI quirks added
to drivers/platform/x86/touchscreen_dmi.c, so IMHO it does make sense
as a stable series patch.

Regards,

Hans

Re: [PATCH AUTOSEL 6.1 23/29] Input: silead - Always support 10 fingers

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1532 bytes --]

On Wed 2024-07-10 11:59:48, Hans de Goede wrote:
> Hi Pavel,
> 
> On 7/10/24 11:58 AM, Pavel Machek wrote:
> > Hi!
> > 
> >> From: Hans de Goede <hdegoede@redhat.com>
> >>
> >> [ Upstream commit 38a38f5a36da9820680d413972cb733349400532 ]
> >>
> >> When support for Silead touchscreens was orginal added some touchscreens
> >> with older firmware versions only supported 5 fingers and this was made
> >> the default requiring the setting of a "silead,max-fingers=10" uint32
> >> device-property for all touchscreen models which do support 10 fingers.
> >>
> >> There are very few models with the old 5 finger fw, so in practice the
> >> setting of the "silead,max-fingers=10" is boilerplate which needs to
> >> be copy and pasted to every touchscreen config.
> >>
> >> Reporting that 10 fingers are supported on devices which only support
> >> 5 fingers doesn't cause any problems for userspace in practice, since
> >> at max 4 finger gestures are supported anyways. Drop the max_fingers
> >> configuration and simply always assume 10 fingers.
> > 
> > This does not fix a serious bug, should not be in stable.
> 
> This patch is necessary for clean backporting of new DMI quirks added
> to drivers/platform/x86/touchscreen_dmi.c, so IMHO it does make sense
> as a stable series patch.

That's likely not reason it ended up it autosel, but why
not. "Stable-dep-of" tag would be nice in that case.

Best regards,
								Pavel
-- 
People of Russia, stop Putin before his war on Ukraine escalates.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]

[PATCH AUTOSEL 6.1 29/29] HID: Ignore battery for ELAN touchscreens 2F2C and 4116

[Sasha Levin]

From: Louis Dalibard <ontake@ontake.dev>

[ Upstream commit a3a5a37efba11b7cf1a86abe7bccfbcdb521764e ]

At least ASUS Zenbook 14 (2023) and ASUS Zenbook 14 Pro (2023) are affected.

The touchscreen reports a battery status of 0% and jumps to 1% when a
stylus is used.

The device ID was added and the battery ignore quirk was enabled for it.

[jkosina@suse.com: reformatted changelog a bit]
Signed-off-by: Louis Dalibard <ontake@ontake.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-ids.h   | 2 ++
 drivers/hid/hid-input.c | 4 ++++
 2 files changed, 6 insertions(+)

diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 405d88b08908d..4b8c1d18c21e0 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -417,6 +417,8 @@
 #define I2C_DEVICE_ID_HP_SPECTRE_X360_13_AW0020NG  0x29DF
 #define I2C_DEVICE_ID_ASUS_TP420IA_TOUCHSCREEN 0x2BC8
 #define I2C_DEVICE_ID_ASUS_GV301RA_TOUCHSCREEN 0x2C82
+#define I2C_DEVICE_ID_ASUS_UX3402_TOUCHSCREEN 0x2F2C
+#define I2C_DEVICE_ID_ASUS_UX6404_TOUCHSCREEN 0x4116
 #define USB_DEVICE_ID_ASUS_UX550VE_TOUCHSCREEN	0x2544
 #define USB_DEVICE_ID_ASUS_UX550_TOUCHSCREEN	0x2706
 #define I2C_DEVICE_ID_SURFACE_GO_TOUCHSCREEN	0x261A
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 4ba5df3c1e039..b0091819fd58a 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -374,6 +374,10 @@ static const struct hid_device_id hid_battery_quirks[] = {
 	  HID_BATTERY_QUIRK_IGNORE },
 	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_ASUS_GV301RA_TOUCHSCREEN),
 	  HID_BATTERY_QUIRK_IGNORE },
+	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_ASUS_UX3402_TOUCHSCREEN),
+	  HID_BATTERY_QUIRK_IGNORE },
+	{ HID_I2C_DEVICE(USB_VENDOR_ID_ELAN, I2C_DEVICE_ID_ASUS_UX6404_TOUCHSCREEN),
+	  HID_BATTERY_QUIRK_IGNORE },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ELAN, USB_DEVICE_ID_ASUS_UX550_TOUCHSCREEN),
 	  HID_BATTERY_QUIRK_IGNORE },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ELAN, USB_DEVICE_ID_ASUS_UX550VE_TOUCHSCREEN),
-- 
2.43.0

[PATCH AUTOSEL 6.1 23/29] Input: silead - Always support 10 fingers

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 38a38f5a36da9820680d413972cb733349400532 ]

When support for Silead touchscreens was orginal added some touchscreens
with older firmware versions only supported 5 fingers and this was made
the default requiring the setting of a "silead,max-fingers=10" uint32
device-property for all touchscreen models which do support 10 fingers.

There are very few models with the old 5 finger fw, so in practice the
setting of the "silead,max-fingers=10" is boilerplate which needs to
be copy and pasted to every touchscreen config.

Reporting that 10 fingers are supported on devices which only support
5 fingers doesn't cause any problems for userspace in practice, since
at max 4 finger gestures are supported anyways. Drop the max_fingers
configuration and simply always assume 10 fingers.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20240525193854.39130-2-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/touchscreen/silead.c | 19 +++++--------------
 1 file changed, 5 insertions(+), 14 deletions(-)

diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c
index 3eef8c01090fd..30e15b6a93574 100644
--- a/drivers/input/touchscreen/silead.c
+++ b/drivers/input/touchscreen/silead.c
@@ -71,7 +71,6 @@ struct silead_ts_data {
 	struct regulator_bulk_data regulators[2];
 	char fw_name[64];
 	struct touchscreen_properties prop;
-	u32 max_fingers;
 	u32 chip_id;
 	struct input_mt_pos pos[SILEAD_MAX_FINGERS];
 	int slots[SILEAD_MAX_FINGERS];
@@ -136,7 +135,7 @@ static int silead_ts_request_input_dev(struct silead_ts_data *data)
 	touchscreen_parse_properties(data->input, true, &data->prop);
 	silead_apply_efi_fw_min_max(data);
 
-	input_mt_init_slots(data->input, data->max_fingers,
+	input_mt_init_slots(data->input, SILEAD_MAX_FINGERS,
 			    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED |
 			    INPUT_MT_TRACK);
 
@@ -256,10 +255,10 @@ static void silead_ts_read_data(struct i2c_client *client)
 		return;
 	}
 
-	if (buf[0] > data->max_fingers) {
+	if (buf[0] > SILEAD_MAX_FINGERS) {
 		dev_warn(dev, "More touches reported then supported %d > %d\n",
-			 buf[0], data->max_fingers);
-		buf[0] = data->max_fingers;
+			 buf[0], SILEAD_MAX_FINGERS);
+		buf[0] = SILEAD_MAX_FINGERS;
 	}
 
 	if (silead_ts_handle_pen_data(data, buf))
@@ -315,7 +314,6 @@ static void silead_ts_read_data(struct i2c_client *client)
 
 static int silead_ts_init(struct i2c_client *client)
 {
-	struct silead_ts_data *data = i2c_get_clientdata(client);
 	int error;
 
 	error = i2c_smbus_write_byte_data(client, SILEAD_REG_RESET,
@@ -325,7 +323,7 @@ static int silead_ts_init(struct i2c_client *client)
 	usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX);
 
 	error = i2c_smbus_write_byte_data(client, SILEAD_REG_TOUCH_NR,
-					data->max_fingers);
+					  SILEAD_MAX_FINGERS);
 	if (error)
 		goto i2c_write_err;
 	usleep_range(SILEAD_CMD_SLEEP_MIN, SILEAD_CMD_SLEEP_MAX);
@@ -591,13 +589,6 @@ static void silead_ts_read_props(struct i2c_client *client)
 	const char *str;
 	int error;
 
-	error = device_property_read_u32(dev, "silead,max-fingers",
-					 &data->max_fingers);
-	if (error) {
-		dev_dbg(dev, "Max fingers read error %d\n", error);
-		data->max_fingers = 5; /* Most devices handle up-to 5 fingers */
-	}
-
 	error = device_property_read_string(dev, "firmware-name", &str);
 	if (!error)
 		snprintf(data->fw_name, sizeof(data->fw_name),
-- 
2.43.0