From: Werner Sembach <wse@tuxedocomputers.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 3/4] Input: i8042: Swap old quirk combination with new quirk for severl devices
Date: Fri, 14 Feb 2025 15:07:17 +0100 [thread overview]
Message-ID: <40020511-1bd6-476a-94a2-ac77a9972aaa@tuxedocomputers.com> (raw)
In-Reply-To: <20250213160832.74484-3-wse@tuxedocomputers.com>
Oops typo in the header line, should I resend it?
Am 13.02.25 um 16:47 schrieb Werner Sembach:
> Some older Clevo barebones have problems like no or laggy keyboard after
> resume or boot which can be fixed with the SERIO_QUIRK_FORCENORESTORE
> quirk.
>
> While the old quirk combination did not show negative effects on these
> devices specifically, the new quirk works just as well and seems more
> stable in general.
>
> Cc: <stable@vger.kernel.org>
> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
> ---
> drivers/input/serio/i8042-acpipnpio.h | 40 ++++++++++-----------------
> 1 file changed, 14 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h
> index a0a99f06c6685..d4ff34d36b42c 100644
> --- a/drivers/input/serio/i8042-acpipnpio.h
> +++ b/drivers/input/serio/i8042-acpipnpio.h
> @@ -1080,16 +1080,14 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
> DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
> DMI_MATCH(DMI_BOARD_NAME, "AURA1501"),
> },
> - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
> - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
> + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
> },
> {
> .matches = {
> DMI_MATCH(DMI_BOARD_VENDOR, "TUXEDO"),
> DMI_MATCH(DMI_BOARD_NAME, "EDUBOOK1502"),
> },
> - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
> - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
> + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
> },
> {
> /* Mivvy M310 */
> @@ -1171,8 +1169,7 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
> .matches = {
> DMI_MATCH(DMI_BOARD_NAME, "LAPQC71A"),
> },
> - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
> - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
> + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
> },
> {
> .matches = {
> @@ -1205,8 +1202,7 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
> .matches = {
> DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
> },
> - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
> - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
> + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
> },
> {
> /*
> @@ -1225,8 +1221,7 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
> .matches = {
> DMI_MATCH(DMI_BOARD_NAME, "NL5xRU"),
> },
> - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
> - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
> + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
> },
> /*
> * At least one modern Clevo barebone has the touchpad connected both
> @@ -1242,17 +1237,15 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
> .matches = {
> DMI_MATCH(DMI_BOARD_NAME, "NS50MU"),
> },
> - .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
> - SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
> - SERIO_QUIRK_NOPNP)
> + .driver_data = (void *)(SERIO_QUIRK_NOAUX |
> + SERIO_QUIRK_FORCENORESTORE)
> },
> {
> .matches = {
> DMI_MATCH(DMI_BOARD_NAME, "NS50_70MU"),
> },
> - .driver_data = (void *)(SERIO_QUIRK_NOAUX | SERIO_QUIRK_NOMUX |
> - SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP |
> - SERIO_QUIRK_NOPNP)
> + .driver_data = (void *)(SERIO_QUIRK_NOAUX |
> + SERIO_QUIRK_FORCENORESTORE)
> },
> {
> .matches = {
> @@ -1326,8 +1319,7 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
> .matches = {
> DMI_MATCH(DMI_PRODUCT_NAME, "P65_67RS"),
> },
> - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
> - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
> + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
> },
> {
> /*
> @@ -1345,8 +1337,7 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
> .matches = {
> DMI_MATCH(DMI_BOARD_NAME, "PB50_70DFx,DDx"),
> },
> - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
> - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
> + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
> },
> {
> .matches = {
> @@ -1370,8 +1361,7 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
> .matches = {
> DMI_MATCH(DMI_BOARD_NAME, "PCX0DX"),
> },
> - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
> - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
> + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
> },
> /* See comment on TUXEDO InfinityBook S17 Gen6 / Clevo NS70MU above */
> {
> @@ -1384,15 +1374,13 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
> .matches = {
> DMI_MATCH(DMI_BOARD_NAME, "X170SM"),
> },
> - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
> - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
> + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
> },
> {
> .matches = {
> DMI_MATCH(DMI_BOARD_NAME, "X170KM-G"),
> },
> - .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS |
> - SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP)
> + .driver_data = (void *)(SERIO_QUIRK_FORCENORESTORE)
> },
> {
> /*
next prev parent reply other threads:[~2025-02-14 14:07 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-13 15:47 [PATCH 1/4] Input: i8042: Swap old quirk combination with new quirk for NHxxRZQ Werner Sembach
2025-02-13 15:47 ` [PATCH 2/4] Input: i8042: Add required quirks for missing old boardnames Werner Sembach
2025-02-13 15:47 ` [PATCH 3/4] Input: i8042: Swap old quirk combination with new quirk for severl devices Werner Sembach
2025-02-14 14:07 ` Werner Sembach [this message]
2025-02-13 15:47 ` [PATCH 4/4] Input: i8042: Swap old quirk combination with new quirk for more devices Werner Sembach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40020511-1bd6-476a-94a2-ac77a9972aaa@tuxedocomputers.com \
--to=wse@tuxedocomputers.com \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).