From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jiri Slaby Subject: Re: FF layer restrictions [Was: [PATCH 1/1] Input: add sensable phantom driver] Date: Wed, 14 Mar 2007 19:15:33 +0100 Message-ID: <45F83BC5.7020606@gmail.com> References: <2460126662758025813@fi.muni.cz> <45EEEAA3.50009@gmail.com> <4af2d03a0703130919nb4893b1ja9ec795dcf4bf53c@mail.gmail.com> <38b3b7c0703131450v2646e63fj2be4b9dda7f928c0@mail.gmail.com> <45F722CE.9000602@gmail.com> <45F82626.8000108@gmail.com> <45F83930.4060401@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <45F83930.4060401@gmail.com> Sender: owner-linux-input@atrey.karlin.mff.cuni.cz List-Help: List-Owner: List-Post: List-Unsubscribe: To: Anssi Hannula Cc: Dmitry Torokhov , johann deneux , Linux kernel mailing list , linux-input@atrey.karlin.mff.cuni.cz List-Id: linux-input@vger.kernel.org Anssi Hannula napsal(a): > Jiri Slaby wrote: >> Dmitry Torokhov napsal(a): >>> On 3/13/07, Jiri Slaby wrote: >>>> Why did you remove all Cced people? Anyway I filtered some of them out >>>> >>>> johann deneux napsal(a): >>>>> You are right, the direction in ff_effect is meant to be an angle. >>>>> A dirty solution would be to use the 16 bits as two 8-bits angles. Or >>>> That would be a problem as I need 3x 16bits. > > Interesting. What kind of device is that? i.e. what is the third > direction value? 6DOF sensable phantom: http://www.sensable.com/haptic-phantom-premium-6dof.htm X,Y,Z,RX,RY,RZ+BUT as inputs X,Y,Z motors as FF regards, -- http://www.fi.muni.cz/~xslaby/ Jiri Slaby faculty of informatics, masaryk university, brno, cz e-mail: jirislaby gmail com, gpg pubkey fingerprint: B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E