From: Anssi Hannula <anssi.hannula@gmail.com>
To: Jiri Kosina <jikos@jikos.cz>
Cc: linux-input@atrey.karlin.mff.cuni.cz
Subject: [patch] HID: use hid-plff driver for GreenAsia 0e8f:0003 devices
Date: Tue, 18 Sep 2007 21:23:01 +0300 [thread overview]
Message-ID: <46F01785.6060501@gmail.com> (raw)
Add 0e8f:0003 into the list of devices supported by the hid-plff
force feedback driver. These devices identify themselves as
"GreenAsia Inc. USB Joystick " and can be either adapters or
actual game controllers. The testing was done with a Köng Gaming
gamepad.
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
---
Index: linux-2.6.23-rc6/drivers/hid/usbhid/Kconfig
===================================================================
--- linux-2.6.23-rc6/drivers/hid/usbhid/Kconfig
+++ linux-2.6.23-rc6/drivers/hid/usbhid/Kconfig 2007-09-18 20:54:53.000000000 +0300
@@ -71,12 +71,12 @@
force feedback.
config PANTHERLORD_FF
- bool "PantherLord USB/PS2 2in1 Adapter support"
+ bool "PantherLord/GreenAsia based device support"
depends on HID_FF
select INPUT_FF_MEMLESS if USB_HID
help
- Say Y here if you have a PantherLord USB/PS2 2in1 Adapter and want
- to enable force feedback support for it.
+ Say Y here if you have a PantherLord/GreenAsia based game controller
+ or adapter and want to enable force feedback support for it.
config THRUSTMASTER_FF
bool "ThrustMaster FireStorm Dual Power 2 support (EXPERIMENTAL)"
Index: linux-2.6.23-rc6/drivers/hid/usbhid/hid-ff.c
===================================================================
--- linux-2.6.23-rc6/drivers/hid/usbhid/hid-ff.c
+++ linux-2.6.23-rc6/drivers/hid/usbhid/hid-ff.c 2007-09-18 20:45:51.000000000 +0300
@@ -62,7 +62,8 @@
{ 0x46d, 0xca03, hid_lgff_init }, /* Logitech MOMO force wheel */
#endif
#ifdef CONFIG_PANTHERLORD_FF
- { 0x810, 0x0001, hid_plff_init },
+ { 0x810, 0x0001, hid_plff_init }, /* "Twin USB Joystick" */
+ { 0xe8f, 0x0003, hid_plff_init }, /* "GreenAsia Inc. USB Joystick " */
#endif
#ifdef CONFIG_THRUSTMASTER_FF
{ 0x44f, 0xb300, hid_tmff_init },
Index: linux-2.6.23-rc6/drivers/hid/usbhid/hid-plff.c
===================================================================
--- linux-2.6.23-rc6/drivers/hid/usbhid/hid-plff.c
+++ linux-2.6.23-rc6/drivers/hid/usbhid/hid-plff.c 2007-09-18 21:02:26.000000000 +0300
@@ -1,5 +1,15 @@
/*
- * Force feedback support for PantherLord USB/PS2 2in1 Adapter devices
+ * Force feedback support for PantherLord/GreenAsia based devices
+ *
+ * The devices are distributed under various names and the same USB device ID
+ * can be used in both adapters and actual game controllers.
+ *
+ * 0810:0001 "Twin USB Joystick"
+ * - tested with PantherLord USB/PS2 2in1 Adapter
+ * - contains two reports, one for each port (HID_QUIRK_MULTI_INPUT)
+ *
+ * 0e8f:0003 "GreenAsia Inc. USB Joystick "
+ * - tested with Köng Gaming gamepad
*
* Copyright (c) 2007 Anssi Hannula <anssi.hannula@gmail.com>
*/
@@ -67,11 +77,11 @@
struct input_dev *dev;
int error;
- /* The device contains 2 output reports (one for each
- HID_QUIRK_MULTI_INPUT device), both containing 1 field, which
- contains 4 ff00.0002 usages and 4 16bit absolute values.
+ /* The device contains one output report per physical device, all
+ containing 1 field, which contains 4 ff00.0002 usages and 4 16bit
+ absolute values.
- The 2 input reports also contain a field which contains
+ The input reports also contain a field which contains
8 ff00.0001 usages and 8 boolean values. Their meaning is
currently unknown. */
@@ -122,8 +132,8 @@
usbhid_submit_report(hid, plff->report, USB_DIR_OUT);
}
- printk(KERN_INFO "hid-plff: Force feedback for PantherLord USB/PS2 "
- "2in1 Adapters by Anssi Hannula <anssi.hannula@gmail.com>\n");
+ printk(KERN_INFO "hid-plff: Force feedback for PantherLord/GreenAsia "
+ "devices by Anssi Hannula <anssi.hannula@gmail.com>\n");
return 0;
}
--
Anssi Hannula
next reply other threads:[~2007-09-18 18:23 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-18 18:23 Anssi Hannula [this message]
2007-09-19 9:57 ` [patch] HID: use hid-plff driver for GreenAsia 0e8f:0003 devices Jiri Kosina
2007-09-19 13:36 ` Anssi Hannula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46F01785.6060501@gmail.com \
--to=anssi.hannula@gmail.com \
--cc=jikos@jikos.cz \
--cc=linux-input@atrey.karlin.mff.cuni.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).