From: Anssi Hannula <anssi.hannula@gmail.com>
To: Jiri Kosina <jkosina@suse.cz>
Cc: linux-input@vger.kernel.org
Subject: [patch] hid: force feedback support for Logitech Rumblepad 2
Date: Mon, 31 Mar 2008 22:42:46 +0300 [thread overview]
Message-ID: <47F13EB6.2090200@gmail.com> (raw)
Add force feedback support for Logitech Rumblepad 2.
Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Tested-By: Edgar Simo <bobbens@gmail.com>
---
Index: linux-2.6.24-hid-rumble/drivers/hid/usbhid/Kconfig
===================================================================
--- linux-2.6.24-hid-rumble/drivers/hid/usbhid/Kconfig
+++ linux-2.6.24-hid-rumble/drivers/hid/usbhid/Kconfig 2008-03-21 12:38:05.000000000 +0200
@@ -70,6 +70,14 @@
Note: if you say N here, this device will still be supported, but without
force feedback.
+config LOGIRUMBLEPAD2_FF
+ bool "Logitech Rumblepad 2 support"
+ depends on HID_FF
+ select INPUT_FF_MEMLESS if USB_HID
+ help
+ Say Y here if you want to enable force feedback support for Logitech
+ Rumblepad 2 devices.
+
config PANTHERLORD_FF
bool "PantherLord/GreenAsia based device support"
depends on HID_FF
Index: linux-2.6.24-hid-rumble/drivers/hid/usbhid/Makefile
===================================================================
--- linux-2.6.24-hid-rumble/drivers/hid/usbhid/Makefile
+++ linux-2.6.24-hid-rumble/drivers/hid/usbhid/Makefile 2008-03-21 12:47:21.000000000 +0200
@@ -16,6 +16,9 @@
ifeq ($(CONFIG_LOGITECH_FF),y)
usbhid-objs += hid-lgff.o
endif
+ifeq ($(CONFIG_LOGIRUMBLEPAD2_FF),y)
+ usbhid-objs += hid-lg2ff.o
+endif
ifeq ($(CONFIG_PANTHERLORD_FF),y)
usbhid-objs += hid-plff.o
endif
Index: linux-2.6.24-hid-rumble/drivers/hid/usbhid/hid-ff.c
===================================================================
--- linux-2.6.24-hid-rumble/drivers/hid/usbhid/hid-ff.c
+++ linux-2.6.24-hid-rumble/drivers/hid/usbhid/hid-ff.c 2008-03-21 12:24:40.000000000 +0200
@@ -59,6 +59,9 @@
{ 0x46d, 0xc295, hid_lgff_init }, /* Logitech MOMO force wheel */
{ 0x46d, 0xca03, hid_lgff_init }, /* Logitech MOMO force wheel */
#endif
+#ifdef CONFIG_LOGIRUMBLEPAD2_FF
+ { 0x46d, 0xc218, hid_lg2ff_init }, /* Logitech Rumblepad 2 */
+#endif
#ifdef CONFIG_PANTHERLORD_FF
{ 0x810, 0x0001, hid_plff_init }, /* "Twin USB Joystick" */
{ 0xe8f, 0x0003, hid_plff_init }, /* "GreenAsia Inc. USB Joystick " */
Index: linux-2.6.24-hid-rumble/drivers/hid/usbhid/hid-lg2ff.c
===================================================================
--- linux-2.6.24-hid-rumble/drivers/hid/usbhid/hid-lg2ff.c
+++ linux-2.6.24-hid-rumble/drivers/hid/usbhid/hid-lg2ff.c 2008-03-31 22:33:19.000000000 +0300
@@ -0,0 +1,114 @@
+/*
+ * Force feedback support for Logitech Rumblepad 2
+ *
+ * Copyright (c) 2008 Anssi Hannula <anssi.hannula@gmail.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/hid.h>
+#include "usbhid.h"
+
+struct lg2ff_device {
+ struct hid_report *report;
+};
+
+static int play_effect(struct input_dev *dev, void *data,
+ struct ff_effect *effect)
+{
+ struct hid_device *hid = input_get_drvdata(dev);
+ struct lg2ff_device *lg2ff = data;
+ int weak, strong;
+
+ strong = effect->u.rumble.strong_magnitude;
+ weak = effect->u.rumble.weak_magnitude;
+
+ if (weak || strong) {
+ weak = weak * 0xff / 0xffff;
+ strong = strong * 0xff / 0xffff;
+
+ lg2ff->report->field[0]->value[0] = 0x51;
+ lg2ff->report->field[0]->value[2] = weak;
+ lg2ff->report->field[0]->value[4] = strong;
+ } else {
+ lg2ff->report->field[0]->value[0] = 0xf3;
+ lg2ff->report->field[0]->value[2] = 0x00;
+ lg2ff->report->field[0]->value[4] = 0x00;
+ }
+
+ usbhid_submit_report(hid, lg2ff->report, USB_DIR_OUT);
+ return 0;
+}
+
+int hid_lg2ff_init(struct hid_device *hid)
+{
+ struct lg2ff_device *lg2ff;
+ struct hid_report *report;
+ struct hid_input *hidinput = list_entry(hid->inputs.next,
+ struct hid_input, list);
+ struct list_head *report_list =
+ &hid->report_enum[HID_OUTPUT_REPORT].report_list;
+ struct input_dev *dev = hidinput->input;
+ int error;
+
+ if (list_empty(report_list)) {
+ printk(KERN_ERR "hid-lg2ff: no output report found\n");
+ return -ENODEV;
+ }
+
+ report = list_entry(report_list->next, struct hid_report, list);
+
+ if (report->maxfield < 1) {
+ printk(KERN_ERR "hid-lg2ff: output report is empty\n");
+ return -ENODEV;
+ }
+ if (report->field[0]->report_count < 7) {
+ printk(KERN_ERR "hid-lg2ff: not enough values in the field\n");
+ return -ENODEV;
+ }
+
+ lg2ff = kmalloc(sizeof(struct lg2ff_device), GFP_KERNEL);
+ if (!lg2ff)
+ return -ENOMEM;
+
+ set_bit(FF_RUMBLE, dev->ffbit);
+
+ error = input_ff_create_memless(dev, lg2ff, play_effect);
+ if (error) {
+ kfree(lg2ff);
+ return error;
+ }
+
+ lg2ff->report = report;
+ report->field[0]->value[0] = 0xf3;
+ report->field[0]->value[1] = 0x00;
+ report->field[0]->value[2] = 0x00;
+ report->field[0]->value[3] = 0x00;
+ report->field[0]->value[4] = 0x00;
+ report->field[0]->value[5] = 0x00;
+ report->field[0]->value[6] = 0x00;
+
+ usbhid_submit_report(hid, report, USB_DIR_OUT);
+
+ printk(KERN_INFO "Force feedback for Logitech Rumblepad 2 by "
+ "Anssi Hannula <anssi.hannula@gmail.com>\n");
+
+ return 0;
+}
Index: linux-2.6.24-hid-rumble/include/linux/hid.h
===================================================================
--- linux-2.6.24-hid-rumble/include/linux/hid.h
+++ linux-2.6.24-hid-rumble/include/linux/hid.h 2008-03-21 12:32:32.000000000 +0200
@@ -536,6 +536,7 @@
int hid_ff_init(struct hid_device *hid);
int hid_lgff_init(struct hid_device *hid);
+int hid_lg2ff_init(struct hid_device *hid);
int hid_plff_init(struct hid_device *hid);
int hid_tmff_init(struct hid_device *hid);
int hid_zpff_init(struct hid_device *hid);
--
Anssi Hannula
reply other threads:[~2008-03-31 19:42 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47F13EB6.2090200@gmail.com \
--to=anssi.hannula@gmail.com \
--cc=jkosina@suse.cz \
--cc=linux-input@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).