From: Rafi Rubin <rafi@seas.upenn.edu>
To: linux-input@vger.kernel.org
Subject: Re: [PATCH] ntrig tool separation and pen usages
Date: Wed, 17 Jun 2009 18:52:41 -0400 [thread overview]
Message-ID: <4A3973B9.4080904@seas.upenn.edu> (raw)
In-Reply-To: <1245278886-11659-1-git-send-email-rafi@seas.upenn.edu>
This patch replaces the two I sent in last night.
Rafi
Rafi Rubin wrote:
> When both touch and pen are active send a tool announcement before
> sending any status changes so that event users may differentiate
> which tool is changing.
>
> Restored three usage codes used by the pen.
>
> Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu>
> ---
> drivers/hid/hid-ntrig.c | 31 ++++++++++++++++++++++++++++---
> 1 files changed, 28 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/hid/hid-ntrig.c b/drivers/hid/hid-ntrig.c
> index 75ed9d2..7765970 100644
> --- a/drivers/hid/hid-ntrig.c
> +++ b/drivers/hid/hid-ntrig.c
> @@ -27,6 +27,9 @@
> struct ntrig_data {
> __s32 x, y, id, w, h;
> char reading_a_point, found_contact_id;
> + char pen_active;
> + char finger_active;
> + char inverted;
> };
>
> /*
> @@ -63,10 +66,7 @@ static int ntrig_input_mapping(struct hid_device *hdev, struct hid_input *hi,
> case HID_UP_DIGITIZER:
> switch (usage->hid) {
> /* we do not want to map these for now */
> - case HID_DG_INVERT: /* value is always 0 */
> - case HID_DG_ERASER: /* value is always 0 */
> case HID_DG_CONTACTID: /* value is useless */
> - case HID_DG_BARRELSWITCH: /* doubtful */
> case HID_DG_INPUTMODE:
> case HID_DG_DEVICEINDEX:
> case HID_DG_CONTACTCOUNT:
> @@ -125,6 +125,18 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field,
>
> if (hid->claimed & HID_CLAIMED_INPUT) {
> switch (usage->hid) {
> +
> + case HID_DG_INRANGE:
> + if(field->application & 0x3)
> + nd->pen_active = value!=0;
> + else
> + nd->finger_active = value!=0;
> + return 0;
> +
> + case HID_DG_INVERT:
> + nd->inverted = value;
> + return 0;
> +
> case HID_GD_X:
> nd->x = value;
> nd->reading_a_point = 1;
> @@ -148,6 +160,10 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field,
> * to emit a normal (X, Y) position
> */
> if (! nd->found_contact_id) {
> + if(nd->pen_active && nd->finger_active) {
> + input_report_key(input, BTN_TOOL_DOUBLETAP, 0);
> + input_report_key(input, BTN_TOOL_DOUBLETAP, 1);
> + }
> input_event(input, EV_ABS, ABS_X, nd->x);
> input_event(input, EV_ABS, ABS_Y, nd->y);
> }
> @@ -159,6 +175,14 @@ static int ntrig_event (struct hid_device *hid, struct hid_field *field,
> * to emit a normal (X, Y) position
> */
> if (! nd->found_contact_id) {
> + if(nd->pen_active && nd->finger_active) {
> + input_report_key(input,
> + nd->inverted ? BTN_TOOL_RUBBER : BTN_TOOL_PEN
> + , 0);
> + input_report_key(input,
> + nd->inverted ? BTN_TOOL_RUBBER : BTN_TOOL_PEN
> + , 1);
> + }
> input_event(input, EV_ABS, ABS_X, nd->x);
> input_event(input, EV_ABS, ABS_Y, nd->y);
> input_event(input, EV_ABS, ABS_PRESSURE, value);
> @@ -233,6 +257,7 @@ static int ntrig_probe(struct hid_device *hdev, const struct hid_device_id *id)
>
> if (ret)
> kfree (nd);
> +
> return ret;
> }
>
next prev parent reply other threads:[~2009-06-17 22:52 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-17 22:48 [PATCH] ntrig tool separation and pen usages Rafi Rubin
2009-06-17 22:52 ` Rafi Rubin [this message]
2009-06-23 12:01 ` Jiri Kosina
2009-06-23 15:29 ` Stéphane Chatty
-- strict thread matches above, loose matches on Subject: below --
2009-06-23 18:09 Rafi Rubin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A3973B9.4080904@seas.upenn.edu \
--to=rafi@seas.upenn.edu \
--cc=linux-input@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).