From: Wan ZongShun <mcuos.com@gmail.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Trilok Soni <soni.trilok@gmail.com>,
linux-input@vger.kernel.org,
linux-arm-kernel <linux-arm-kernel@lists.arm.linux.org.uk>
Subject: Re: [PATCH] input:Add clk api support for w90p910 touchscreen
Date: Wed, 08 Jul 2009 15:10:21 +0800 [thread overview]
Message-ID: <4A54465D.1020105@gmail.com> (raw)
In-Reply-To: <20090708065130.GD3309@dtor-d630.eng.vmware.com>
Dear Dmitry,
Okay, this clocken should be removed here.
I fixed up my patch and re-submitted it.
thanks a lot for your help.
Add clk api support for w90p910 touchscreen.
Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
---
drivers/input/touchscreen/w90p910_ts.c | 25 ++++++++++++-------------
1 files changed, 12 insertions(+), 13 deletions(-)
diff --git a/drivers/input/touchscreen/w90p910_ts.c b/drivers/input/touchscreen/w90p910_ts.c
index 6071f58..7bef19e 100644
--- a/drivers/input/touchscreen/w90p910_ts.c
+++ b/drivers/input/touchscreen/w90p910_ts.c
@@ -13,6 +13,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/clk.h>
#include <linux/input.h>
#include <linux/interrupt.h>
@@ -47,8 +48,8 @@ enum ts_state {
struct w90p910_ts {
struct input_dev *input;
struct timer_list timer;
+ struct clk *clk;
int irq_num;
- void __iomem *clocken;
void __iomem *ts_reg;
spinlock_t lock;
enum ts_state state;
@@ -166,8 +167,7 @@ static int w90p910_open(struct input_dev *dev)
unsigned long val;
/* enable the ADC clock */
- val = __raw_readl(w90p910_ts->clocken);
- __raw_writel(val | ADC_CLK_EN, w90p910_ts->clocken);
+ clk_enable(w90p910_ts->clk);
__raw_writel(ADC_RST1, w90p910_ts->ts_reg);
msleep(1);
@@ -211,8 +211,8 @@ static void w90p910_close(struct input_dev *dev)
del_timer_sync(&w90p910_ts->timer);
/* stop the ADC clock */
- val = __raw_readl(w90p910_ts->clocken);
- __raw_writel(val & ~ADC_CLK_EN, w90p910_ts->clocken);
+ clk_disable(w90p910_ts->clk);
+ clk_put(w90p910_ts->clk);
}
static int __devinit w90x900ts_probe(struct platform_device *pdev)
@@ -253,14 +253,12 @@ static int __devinit w90x900ts_probe(struct platform_device *pdev)
goto fail2;
}
- res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (!res) {
- err = -ENXIO;
+ w90p910_ts->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(w90p910_ts->clk)) {
+ err = PTR_ERR(w90p910_ts->clk);
goto fail3;
}
- w90p910_ts->clocken = (void __iomem *)res->start;
-
input_dev->name = "W90P910 TouchScreen";
input_dev->phys = "w90p910ts/event0";
input_dev->id.bustype = BUS_HOST;
@@ -283,18 +281,19 @@ static int __devinit w90x900ts_probe(struct platform_device *pdev)
if (request_irq(w90p910_ts->irq_num, w90p910_ts_interrupt,
IRQF_DISABLED, "w90p910ts", w90p910_ts)) {
err = -EBUSY;
- goto fail3;
+ goto fail4;
}
err = input_register_device(w90p910_ts->input);
if (err)
- goto fail4;
+ goto fail5;
platform_set_drvdata(pdev, w90p910_ts);
return 0;
-fail4: free_irq(w90p910_ts->irq_num, w90p910_ts);
+fail5: free_irq(w90p910_ts->irq_num, w90p910_ts);
+fail4: clk_put(w90p910_ts->clk);
fail3: iounmap(w90p910_ts->ts_reg);
fail2: release_mem_region(res->start, res->end - res->start + 1);
fail1: input_free_device(input_dev);
--
1.5.6.3
next prev parent reply other threads:[~2009-07-08 7:10 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-07 14:28 [PATCH] input:Add clk api support for w90p910 touchscreen Wan ZongShun
2009-07-07 17:19 ` Trilok Soni
2009-07-08 5:22 ` Wan ZongShun
2009-07-08 6:51 ` Dmitry Torokhov
2009-07-08 7:10 ` Wan ZongShun [this message]
2009-07-08 10:34 ` Trilok Soni
2009-07-08 14:06 ` Wan ZongShun
2009-07-08 14:21 ` Trilok Soni
2009-07-08 14:31 ` Wan ZongShun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A54465D.1020105@gmail.com \
--to=mcuos.com@gmail.com \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-arm-kernel@lists.arm.linux.org.uk \
--cc=linux-input@vger.kernel.org \
--cc=soni.trilok@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).