From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Jory A. Pratt" Subject: Re: [PATCH] Asus G1S noloop exception V2 Date: Wed, 29 Jul 2009 22:17:33 -0500 Message-ID: <4A7110CD.9090405@gmail.com> References: <20090730031946.C7F1F526EC9@mailhub.coreip.homeip.net> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------030009020307040002000100" Return-path: Received: from mail-yx0-f188.google.com ([209.85.210.188]:41356 "EHLO mail-yx0-f188.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753862AbZG3DWv (ORCPT ); Wed, 29 Jul 2009 23:22:51 -0400 Received: by yxe26 with SMTP id 26so2133218yxe.4 for ; Wed, 29 Jul 2009 20:22:51 -0700 (PDT) In-Reply-To: <20090730031946.C7F1F526EC9@mailhub.coreip.homeip.net> Sender: linux-input-owner@vger.kernel.org List-Id: linux-input@vger.kernel.org To: Dmitry Torokhov Cc: "linux-input@vger.kernel.org" , "akpm@linux-foundation.org" This is a multi-part message in MIME format. --------------030009020307040002000100 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit As requested here is the dmesg of a failed connection between kernel and synaptics touchpad. Minute I added i8042.noloop=1 back to boot options so I can have my mouse back everything works as expected. On 07/29/09 21:45, Dmitry Torokhov wrote: > Hi Jory, > > On Tue, Jul 28, 2009 at 10:11:46PM -0500, Jory A. Pratt wrote: >> After further testing I realized there was a mistake in the patch. The >> DMI_BOARD_VENDOR should have been >> ASUSTeK Computer Inc. instead of ASUSTeK Computer INC. Patch has been >> fully tested with 20+ reboots and cold >> boots to ensure it is working properly. >> > > Since you are saying that AUX loop detection usually works on your > laptop simply disabling it is not the best solution. Could you please > provide me with dmesg of booting with i8042.debug=1 when touchpad > is not detected? > --------------030009020307040002000100 Content-Type: text/plain; name="dmesg-i8042.debug=1.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="dmesg-i8042.debug=1.txt" Linux version 2.6.30-gentoo-r4 (root@pepsi) (gcc version 4.4.1 (Gentoo 4.4.1 p1.0) ) #1 SMP Wed Jul 29 22:03:25 CDT 2009 Command line: root=/dev/sda3 vga=0x369 i8042.debug=1 KERNEL supported cpus: Intel GenuineIntel BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable) BIOS-e820: 00000000bffb0000 - 00000000bffbe000 (ACPI data) BIOS-e820: 00000000bffbe000 - 00000000bfff0000 (ACPI NVS) BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) DMI 2.4 present. AMI BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x140000 max_arch_pfn = 0x100000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-EFFFF write-through F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0C0000000 mask FC0000000 uncachable 1 base 000000000 mask F00000000 write-back 2 base 100000000 mask FC0000000 write-back 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xbffb0 max_arch_pfn = 0x100000000 Scanning 0 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000010000 (reserved) modified: 0000000000010000 - 000000000009fc00 (usable) modified: 000000000009fc00 - 00000000000a0000 (reserved) modified: 00000000000e4000 - 0000000000100000 (reserved) modified: 0000000000100000 - 00000000bffb0000 (usable) modified: 00000000bffb0000 - 00000000bffbe000 (ACPI data) modified: 00000000bffbe000 - 00000000bfff0000 (ACPI NVS) modified: 00000000bfff0000 - 00000000c0000000 (reserved) modified: 00000000fee00000 - 00000000fee01000 (reserved) modified: 00000000ffb00000 - 0000000100000000 (reserved) modified: 0000000100000000 - 0000000140000000 (usable) init_memory_mapping: 0000000000000000-00000000bffb0000 0000000000 - 00bfe00000 page 2M 00bfe00000 - 00bffb0000 page 4k kernel direct mapping tables up to bffb0000 @ 10000-15000 init_memory_mapping: 0000000100000000-0000000140000000 0100000000 - 0140000000 page 2M kernel direct mapping tables up to 140000000 @ 13000-19000 ACPI: RSDP 00000000000f81d0 00024 (v02 ACPIAM) ACPI: XSDT 00000000bffb0100 0007C (v01 _ASUS_ Notebook 12000725 MSFT 00000097) ACPI: FACP 00000000bffb0290 000F4 (v03 A_M_I_ OEMFACP 12000725 MSFT 00000097) ACPI: DSDT 00000000bffb0680 0ADF0 (v01 G1S00 G1S00000 00000000 INTL 20061109) ACPI: FACS 00000000bffbe000 00040 ACPI: APIC 00000000bffb0390 0005C (v01 A_M_I_ OEMAPIC 12000725 MSFT 00000097) ACPI: MCFG 00000000bffb0430 0003C (v01 A_M_I_ OEMMCFG 12000725 MSFT 00000097) ACPI: SLIC 00000000bffb0470 00176 (v01 _ASUS_ Notebook 12000725 MSFT 00000097) ACPI: DBGP 00000000bffb03f0 00034 (v01 A_M_I_ OEMDBGP 12000725 MSFT 00000097) ACPI: BOOT 00000000bffb05f0 00028 (v01 A_M_I_ OEMBOOT 12000725 MSFT 00000097) ACPI: ECDT 00000000bffb0620 00054 (v01 A_M_I_ OEMECDT 12000725 MSFT 00000097) ACPI: OEMB 00000000bffbe040 00060 (v01 A_M_I_ AMI_OEM 12000725 MSFT 00000097) ACPI: HPET 00000000bffbb490 00038 (v01 A_M_I_ OEMHPET 12000725 MSFT 00000097) ACPI: ATKG 00000000bffbe2a0 08024 (v01 A_M_I_ OEMATKG 05000702 MSFT 00000097) ACPI: SSDT 00000000bffc6de0 004E6 (v01 PmRef CpuPm 00003000 INTL 20051117) ACPI: Local APIC address 0xfee00000 (7 early reservations) ==> bootmem [0000000000 - 0140000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 0001830cd8] TEXT DATA BSS ==> [0001000000 - 0001830cd8] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #4 [0001831000 - 0001831240] BRK ==> [0001831000 - 0001831240] #5 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000] #6 [0000013000 - 0000014000] PGTABLE ==> [0000013000 - 0000014000] [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002c7fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00140000 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000bffb0 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1048383 DMA zone: 56 pages used for memmap DMA zone: 103 pages reserved DMA zone: 3824 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 767976 pages, LIFO batch:31 Normal zone: 3584 pages used for memmap Normal zone: 258560 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 PM: Registered nosave memory: 00000000bffb0000 - 00000000bffbe000 PM: Registered nosave memory: 00000000bffbe000 - 00000000bfff0000 PM: Registered nosave memory: 00000000bfff0000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000 PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000 Allocating PCI resources starting at c4000000 (gap: c0000000:3ee00000) NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 25 pages at ffff880028022000, static data 71840 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1030360 Kernel command line: root=/dev/sda3 vga=0x369 i8042.debug=1 Initializing CPU#0 Experimental hierarchical RCU implementation. Experimental hierarchical RCU init done. NR_IRQS:2304 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 2194.656 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 4039964k/5242880k available (4636k kernel code, 1049348k absent, 152588k reserved, 1861k data, 360k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.31 BogoMIPS (lpj=2194656) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring handled by SMI using mwait in idle threads. ACPI: Core revision 20090320 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4388.78 BogoMIPS (lpj=2194390) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (8778.09 BogoMIPS). net_namespace: 560 bytes NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base c0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: EC description table is found, configuring boot EC ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base c0000000 segment 0 buses 0 - 255 PCI: MCFG area at c0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at c0000000 - cfffffff ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in poll mode ACPI Warning (tbutils-0246): Incorrect checksum in table [ATKG] - 2A, should be 59 [20090320] ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0xe080-0xe09f] pci 0000:00:1a.1: reg 20 io port: [0xe000-0xe01f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfebff400-0xfebff7ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfebf8000-0xfebfbfff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xdc00-0xdc1f] pci 0000:00:1d.1: reg 20 io port: [0xd880-0xd89f] pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebff000-0xfebff3ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0250 (mask 000f) pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] pci 0000:00:1f.2: reg 10 io port: [0xec00-0xec07] pci 0000:00:1f.2: reg 14 io port: [0xe880-0xe883] pci 0000:00:1f.2: reg 18 io port: [0xe800-0xe807] pci 0000:00:1f.2: reg 1c io port: [0xe480-0xe483] pci 0000:00:1f.2: reg 20 io port: [0xe400-0xe41f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfebff800-0xfebfffff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:01:00.0: reg 10 32bit mmio: [0xfc000000-0xfcffffff] pci 0000:01:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff] pci 0000:01:00.0: reg 24 io port: [0x9c00-0x9c7f] pci 0000:01:00.0: reg 30 32bit mmio: [0xfdee0000-0xfdefffff] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff] pci 0000:00:01.0: bridge 32bit mmio: [0xf7e00000-0xfdefffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd5d00000-0xf5cfffff] pci 0000:02:00.0: reg 10 io port: [0xa800-0xa8ff] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdfff000-0xfdffffff] pci 0000:02:00.0: reg 30 32bit mmio: [0xfdfc0000-0xfdfdffff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.0: bridge io port: [0xa000-0xafff] pci 0000:00:1c.0: bridge 32bit mmio: [0xfdf00000-0xfdffffff] pci 0000:03:00.0: reg 10 64bit mmio: [0xfe0fe000-0xfe0fffff] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.1: bridge 32bit mmio: [0xfe000000-0xfe0fffff] pci 0000:00:1c.2: bridge io port: [0xb000-0xbfff] pci 0000:00:1c.2: bridge 32bit mmio: [0xfe100000-0xfe8fffff] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf5d00000-0xf7cfffff] pci 0000:07:00.0: reg 10 io port: [0xcc00-0xcc07] pci 0000:07:00.0: reg 14 io port: [0xc880-0xc883] pci 0000:07:00.0: reg 18 io port: [0xc800-0xc807] pci 0000:07:00.0: reg 1c io port: [0xc480-0xc483] pci 0000:07:00.0: reg 20 io port: [0xc400-0xc40f] pci 0000:07:00.0: reg 24 32bit mmio: [0xfe9fe000-0xfe9fffff] pci 0000:07:00.0: PME# supported from D3hot pci 0000:07:00.0: PME# disabled pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff] pci 0000:00:1c.4: bridge 32bit mmio: [0xfe900000-0xfe9fffff] pci 0000:08:01.0: reg 10 32bit mmio: [0xfeaff800-0xfeafffff] pci 0000:08:01.0: PME# supported from D0 D3hot D3cold pci 0000:08:01.0: PME# disabled pci 0000:08:01.1: reg 10 32bit mmio: [0xfeaff400-0xfeaff4ff] pci 0000:08:01.1: supports D1 D2 pci 0000:08:01.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:01.1: PME# disabled pci 0000:08:01.2: reg 10 32bit mmio: [0xfeaff000-0xfeaff0ff] pci 0000:08:01.2: supports D1 D2 pci 0000:08:01.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:01.2: PME# disabled pci 0000:08:01.3: reg 10 32bit mmio: [0xfeafec00-0xfeafecff] pci 0000:08:01.3: supports D1 D2 pci 0000:08:01.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:01.3: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xfea00000-0xfeafffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12) ACPI: PCI Interrupt Link [LNKC] (IRQs *3) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *7 10 12) ACPI: PCI Interrupt Link [LNKE] (IRQs *6) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 12) SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: WMI: Mapper loaded PCI: Using ACPI for IRQ routing Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized cfg80211: Calling CRDA to update world regulatory domain hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved system 00:08: ioport range 0x4d0-0x4d1 has been reserved system 00:08: ioport range 0x800-0x87f has been reserved system 00:08: ioport range 0x400-0x41f has been reserved system 00:08: ioport range 0x500-0x53f has been reserved system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:08: iomem range 0xfed45000-0xfed89fff has been reserved system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved system 00:08: iomem range 0xfff00000-0xffffffff has been reserved system 00:0a: ioport range 0x250-0x253 has been reserved system 00:0a: ioport range 0x256-0x25f has been reserved system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0b: iomem range 0xc0000000-0xcfffffff has been reserved system 00:0c: iomem range 0x0-0x9ffff could not be reserved system 00:0c: iomem range 0xc0000-0xcffff has been reserved system 00:0c: iomem range 0xe0000-0xfffff could not be reserved system 00:0c: iomem range 0x100000-0xbfffffff could not be reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x9000-0x9fff pci 0000:00:01.0: MEM window: 0xf7e00000-0xfdefffff pci 0000:00:01.0: PREFETCH window: 0x000000d5d00000-0x000000f5cfffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0xa000-0xafff pci 0000:00:1c.0: MEM window: 0xfdf00000-0xfdffffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: 0xfe000000-0xfe0fffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.2: IO window: 0xb000-0xbfff pci 0000:00:1c.2: MEM window: 0xfe100000-0xfe8fffff pci 0000:00:1c.2: PREFETCH window: 0x000000f5d00000-0x000000f7cfffff pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06 pci 0000:00:1c.3: IO window: disabled pci 0000:00:1c.3: MEM window: disabled pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07 pci 0000:00:1c.4: IO window: 0xc000-0xcfff pci 0000:00:1c.4: MEM window: 0xfe900000-0xfe9fffff pci 0000:00:1c.4: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: 0xfea00000-0xfeafffff pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff] pci_bus 0000:01: resource 1 mem: [0xf7e00000-0xfdefffff] pci_bus 0000:01: resource 2 pref mem [0xd5d00000-0xf5cfffff] pci_bus 0000:02: resource 0 io: [0xa000-0xafff] pci_bus 0000:02: resource 1 mem: [0xfdf00000-0xfdffffff] pci_bus 0000:03: resource 1 mem: [0xfe000000-0xfe0fffff] pci_bus 0000:04: resource 0 io: [0xb000-0xbfff] pci_bus 0000:04: resource 1 mem: [0xfe100000-0xfe8fffff] pci_bus 0000:04: resource 2 pref mem [0xf5d00000-0xf7cfffff] pci_bus 0000:07: resource 0 io: [0xc000-0xcfff] pci_bus 0000:07: resource 1 mem: [0xfe900000-0xfe9fffff] pci_bus 0000:08: resource 1 mem: [0xfea00000-0xfeafffff] pci_bus 0000:08: resource 3 io: [0x00-0xffff] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Simple Boot Flag at 0x52 set to 0x1 Microcode Update Driver: v2.00 , Peter Oruba Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1248905526.323:1): initialized SGI XFS with security attributes, large block/inode numbers, no debug enabled msgmni has been set to 7892 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X pcieport-driver 0000:00:1c.2: setting latency timer to 64 pcieport-driver 0000:00:1c.3: irq 28 for MSI/MSI-X pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.4: irq 29 for MSI/MSI-X pcieport-driver 0000:00:1c.4: setting latency timer to 64 Non-volatile memory driver v1.3 Linux agpgart interface v0.103 vesafb: framebuffer at 0xfb000000, mapped to 0xffffc20010100000, using 13781k, total 14336k vesafb: mode is 1680x1050x32, linelength=6720, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 Console: switching to colour frame buffer device 210x65 fb0: VESA VGA frame buffer device ACPI: AC Adapter [AC0] (on-line) input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Lid Switch [LID] acpi device:07: registered as cooling_device0 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/device:03/input/input3 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) ACPI: SSDT 00000000bffc63a0 00286 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) ACPI: SSDT 00000000bffc66c0 00712 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Marking TSC unstable due to TSC halts in idle ACPI: CPU0 (power states: C1[C1] C2[C2]) processor ACPI_CPU:00: registered as cooling_device1 ACPI: Processor [P001] (supports 8 throttling states) ACPI: SSDT 00000000bffc62d0 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20051117) ACPI: SSDT 00000000bffc6630 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117) ACPI: CPU1 (power states: C1[C1] C2[C2]) processor ACPI_CPU:01: registered as cooling_device2 ACPI: Processor [P002] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (76 C) ACPI: Battery Slot [BAT0] (battery present) floppy0: no floppy controllers found loop: module loaded Uniform Multi-Platform E-IDE driver piix 0000:00:1f.1: IDE controller (0x8086:0x2850 rev 0x03) PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 piix 0000:00:1f.1: IDE port disabled piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7 Probing IDE interface ide0... hda: HL-DT-ST DVDRAM GSA-T20L, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide-cd driver 5.00 ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20 ahci 0000:00:1f.2: irq 30 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff900 irq 30 ata2: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebff980 irq 30 ata3: SATA max UDMA/133 abar m2048@0xfebff800 port 0xfebffa00 irq 30 ahci 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ahci 0000:07:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode ahci 0000:07:00.0: flags: 64bit ncq pm led clo pmp pio slum part ahci 0000:07:00.0: setting latency timer to 64 scsi3 : ahci ata4: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe100 irq 16 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 r8169 0000:02:00.0: setting latency timer to 64 r8169 0000:02:00.0: irq 31 for MSI/MSI-X eth0: RTL8168b/8111b at 0xffffc2000004e000, 00:1d:60:6b:6a:5e, XID 38000000 IRQ 31 iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:03:00.0: setting latency timer to 64 iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4 ata2: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) iwlagn 0000:03:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels iwlagn 0000:03:00.0: irq 32 for MSI/MSI-X phy0: Selected rate control algorithm 'iwl-agn-rs' firewire_ohci 0000:08:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) firewire_ohci: Added fw-ohci device 0000:08:01.0, OHCI version 1.0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebff400 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.30-gentoo-r4 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.30-gentoo-r4 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e080 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.30-gentoo-r4 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.30-gentoo-r4 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000dc00 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.30-gentoo-r4 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.30-gentoo-r4 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.1 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.30-gentoo-r4 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.2 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver libusual usbcore: registered new interface driver berry_charge PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 drivers/input/serio/i8042.c: 20 -> i8042 (command) [1] drivers/input/serio/i8042.c: 45 <- i8042 (return) [1] drivers/input/serio/i8042.c: 60 -> i8042 (command) [1] drivers/input/serio/i8042.c: 54 -> i8042 (parameter) [1] drivers/input/serio/i8042.c: d3 -> i8042 (command) [1] drivers/input/serio/i8042.c: 5a -> i8042 (parameter) [1] drivers/input/serio/i8042.c: 5a <- i8042 (return) [1] drivers/input/serio/i8042.c: a7 -> i8042 (command) [1] drivers/input/serio/i8042.c: 20 -> i8042 (command) [1] drivers/input/serio/i8042.c: 74 <- i8042 (return) [1] drivers/input/serio/i8042.c: a8 -> i8042 (command) [2] drivers/input/serio/i8042.c: 20 -> i8042 (command) [2] drivers/input/serio/i8042.c: 54 <- i8042 (return) [2] drivers/input/serio/i8042.c: 60 -> i8042 (command) [2] drivers/input/serio/i8042.c: 56 -> i8042 (parameter) [2] drivers/input/serio/i8042.c: d3 -> i8042 (command) [2] drivers/input/serio/i8042.c: a5 -> i8042 (parameter) [2] drivers/input/serio/i8042.c: a5 <- i8042 (flush, aux) [252] drivers/input/serio/i8042.c: 60 -> i8042 (command) [252] drivers/input/serio/i8042.c: 74 -> i8042 (parameter) [252] drivers/input/serio/i8042.c: 60 -> i8042 (command) [252] drivers/input/serio/i8042.c: 65 -> i8042 (parameter) [252] serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice drivers/input/serio/i8042.c: f2 -> i8042 (kbd-data) [253] rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs Linux video capture interface: v2.00 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [255] drivers/input/serio/i8042.c: ab <- i8042 (interrupt, 0, 1) [2194] usb 1-1: new high speed USB device using ehci_hcd and address 2 ata4: SATA link down (SStatus 0 SControl 300) ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out drivers/input/serio/i8042.c: 41 <- i8042 (interrupt, 0, 1) [2194] drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [2194] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [2257] drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [2257] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out Bluetooth: Generic Bluetooth USB driver ver 0.5 usbcore: registered new interface driver btusb cpuidle: using governor ladder sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pci 0000:08:01.1: SDHCI controller found [1180:0822] (rev 22) sdhci-pci 0000:08:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [2260] Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:08:01.1] using PIO ricoh-mmc: Ricoh MMC Controller disabling driver ricoh-mmc: Copyright(c) Philip Langdale usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver usbcore: registered new interface driver asus-oled asus-laptop: Asus Laptop Support version 0.42 asus-laptop: G1S model detected asus-laptop: Brightness ignored, must be controlled by ACPI video driver input: Asus Laptop extra buttons as /devices/virtual/input/input4 Registered led device: asus::mail Registered led device: asus::touchpad Registered led device: asus::gaming Advanced Linux Sound Architecture Driver Version 1.0.20. HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 drivers/input/serio/i8042.c: f3 -> i8042 (kbd-data) [2762] firewire_core: created device fw0: GUID 00e0180003a482f6, S400 drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [2764] drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [2764] drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [2765] drivers/input/serio/i8042.c: f4 -> i8042 (kbd-data) [2784] ata1.00: ATA-8: Hitachi HTS722016K9SA00, DCDOC54P, max UDMA/133 drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [2806] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 ata1.00: ACPI cmd ef/10:06:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72201 DCDO PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<5>sd 0:0:0:0: Attached scsi generic sg0 type 0 sda1 sda2 sda3 sda4 <<6>ALSA device list: usb 1-1: New USB device found, idVendor=04f2, idProduct=b012 usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=3 usb 1-1: Product: USB2.0 1.3M UVC WebCam usb 1-1: Manufacturer: Chicony Electronics Co., Ltd. usb 1-1: SerialNumber: SN0001 usb 1-1: configuration #1 chosen from 1 choice #0: HDA Intel at 0xfebf8000 irq 22 uvcvideo: Found UVC 1.00 device USB2.0 1.3M UVC WebCam (04f2:b012) TCP cubic registered NET: Registered protocol family 17 Bluetooth: L2CAP ver 2.13 Bluetooth: L2CAP socket layer initialized input: USB2.0 1.3M UVC WebCam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input6 sda5<6>Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.11 lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' usb 1-2: new high speed USB device using ehci_hcd and address 3 rtc_cmos 00:03: setting system clock to 2009-07-29 22:12:17 UTC (1248905537) mmc0: new SD card at address b368 sda6<6>mmcblk0: mmc0:b368 SD01G 958 MiB mmcblk0: p1 sda7 > sd 0:0:0:0: [sda] Attached SCSI disk usb 1-2: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 9 usb 1-2: config 1 interface 0 altsetting 0 endpoint 0x2 has an invalid bInterval 0, changing to 9 usb 1-2: New USB device found, idVendor=0b05, idProduct=1726 usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-2: Product: LCM usb 1-2: Manufacturer: ASUS usb 1-2: configuration #1 chosen from 1 choice asus-oled 1-2:1.0: Attached Asus OLED device: G1/G2 [width 128, pack_mode 0] UDF-fs: No partition found (1) XFS mounting filesystem sda3 usb 2-3: new high speed USB device using ehci_hcd and address 2 Ending clean XFS mount for filesystem: sda3 VFS: Mounted root (xfs filesystem) readonly on device 8:3. Freeing unused kernel memory: 360k freed usb 2-3: New USB device found, idVendor=0781, idProduct=5406 usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-3: Product: U3 Cruzer Micro usb 2-3: Manufacturer: SanDisk usb 2-3: SerialNumber: 173870168F82862A usb 2-3: configuration #1 chosen from 1 choice scsi4 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usb 7-2: new full speed USB device using uhci_hcd and address 2 Clocksource tsc unstable (delta = -169025684 ns) usb 7-2: New USB device found, idVendor=0b05, idProduct=1712 usb 7-2: New USB device strings: Mfr=0, Product=0, SerialNumber=3 usb 7-2: SerialNumber: 0194E8-5B-0002 usb 7-2: configuration #1 chosen from 1 choice udev: starting version 141 udev: renamed network interface eth0 to lan0 nvidia: module license 'NVIDIA' taints kernel. Disabling lock debugging due to kernel taint nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nvidia 0000:01:00.0: setting latency timer to 64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 185.18.29 Wed Jul 22 23:04:30 PDT 2009 scsi 4:0:0:0: Direct-Access SanDisk Cruzer 7.01 PQ: 0 ANSI: 0 CCS sd 4:0:0:0: Attached scsi generic sg1 type 0 usb-storage: device scan complete sd 4:0:0:0: [sdb] 31306239 512-byte hardware sectors: (16.0 GB/14.9 GiB) sd 4:0:0:0: [sdb] Write Protect is off sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 08 sd 4:0:0:0: [sdb] Assuming drive cache: write through sd 4:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 4:0:0:0: [sdb] Attached SCSI removable disk XFS mounting filesystem sda5 Ending clean XFS mount for filesystem: sda5 XFS mounting filesystem sda6 Ending clean XFS mount for filesystem: sda6 EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended microcode: CPU0 updated from revision 0xb3 to 0xb6, date = 2007-07-13 microcode: CPU1 updated from revision 0xb3 to 0xb6, date = 2007-07-13 Adding 1959920k swap on /dev/sda2. Priority:-1 extents:1 across:1959920k r8169: lan0: link down iwlagn 0000:03:00.0: firmware: requesting iwlwifi-4965-2.ucode iwlagn 0000:03:00.0: loaded firmware version 228.57.2.23 Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX drivers/input/serio/i8042.c: 1d <- i8042 (interrupt, 0, 1) [27034] drivers/input/serio/i8042.c: 38 <- i8042 (interrupt, 0, 1) [27162] drivers/input/serio/i8042.c: 38 <- i8042 (interrupt, 0, 1) [27403] drivers/input/serio/i8042.c: 38 <- i8042 (interrupt, 0, 1) [27437] drivers/input/serio/i8042.c: 3b <- i8042 (interrupt, 0, 1) [27456] drivers/input/serio/i8042.c: bb <- i8042 (interrupt, 0, 1) [27599] drivers/input/serio/i8042.c: 9d <- i8042 (interrupt, 0, 1) [27682] drivers/input/serio/i8042.c: b8 <- i8042 (interrupt, 0, 1) [27716] wlan0: authenticate with AP 00:1d:7e:f8:d9:8a wlan0: authenticated wlan0: associate with AP 00:1d:7e:f8:d9:8a wlan0: RX AssocResp from 00:1d:7e:f8:d9:8a (capab=0x411 status=0 aid=2) wlan0: associated drivers/input/serio/i8042.c: 1e <- i8042 (interrupt, 0, 1) [29563] drivers/input/serio/i8042.c: 9e <- i8042 (interrupt, 0, 1) [29686] drivers/input/serio/i8042.c: 31 <- i8042 (interrupt, 0, 1) [29738] drivers/input/serio/i8042.c: 1e <- i8042 (interrupt, 0, 1) [29817] drivers/input/serio/i8042.c: b1 <- i8042 (interrupt, 0, 1) [29861] drivers/input/serio/i8042.c: 13 <- i8042 (interrupt, 0, 1) [29944] drivers/input/serio/i8042.c: 9e <- i8042 (interrupt, 0, 1) [30013] drivers/input/serio/i8042.c: 93 <- i8042 (interrupt, 0, 1) [30062] drivers/input/serio/i8042.c: 2e <- i8042 (interrupt, 0, 1) [30183] drivers/input/serio/i8042.c: 23 <- i8042 (interrupt, 0, 1) [30275] drivers/input/serio/i8042.c: ae <- i8042 (interrupt, 0, 1) [30349] drivers/input/serio/i8042.c: a3 <- i8042 (interrupt, 0, 1) [30384] drivers/input/serio/i8042.c: 15 <- i8042 (interrupt, 0, 1) [30441] drivers/input/serio/i8042.c: 95 <- i8042 (interrupt, 0, 1) [30534] drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, 0, 1) [30657] drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, 0, 1) [30794] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, 0, 1) [30826] drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, 0, 1) [31066] drivers/input/serio/i8042.c: 21 <- i8042 (interrupt, 0, 1) [31071] drivers/input/serio/i8042.c: aa <- i8042 (interrupt, 0, 1) [31203] drivers/input/serio/i8042.c: a1 <- i8042 (interrupt, 0, 1) [31213] drivers/input/serio/i8042.c: 16 <- i8042 (interrupt, 0, 1) [31228] drivers/input/serio/i8042.c: 96 <- i8042 (interrupt, 0, 1) [31340] drivers/input/serio/i8042.c: 2e <- i8042 (interrupt, 0, 1) [31346] drivers/input/serio/i8042.c: ae <- i8042 (interrupt, 0, 1) [31468] drivers/input/serio/i8042.c: 25 <- i8042 (interrupt, 0, 1) [31514] drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, 0, 1) [31631] drivers/input/serio/i8042.c: a5 <- i8042 (interrupt, 0, 1) [31656] drivers/input/serio/i8042.c: 13 <- i8042 (interrupt, 0, 1) [31685] drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, 0, 1) [31768] drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, 0, 1) [31828] drivers/input/serio/i8042.c: 93 <- i8042 (interrupt, 0, 1) [31862] drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, 0, 1) [31974] drivers/input/serio/i8042.c: 2e <- i8042 (interrupt, 0, 1) [32271] drivers/input/serio/i8042.c: ae <- i8042 (interrupt, 0, 1) [32422] drivers/input/serio/i8042.c: 26 <- i8042 (interrupt, 0, 1) [32448] drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, 0, 1) [32576] drivers/input/serio/i8042.c: a6 <- i8042 (interrupt, 0, 1) [32580] drivers/input/serio/i8042.c: 1e <- i8042 (interrupt, 0, 1) [32659] drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, 0, 1) [32698] drivers/input/serio/i8042.c: 13 <- i8042 (interrupt, 0, 1) [32757] drivers/input/serio/i8042.c: 9e <- i8042 (interrupt, 0, 1) [32845] drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, 0, 1) [32884] drivers/input/serio/i8042.c: 93 <- i8042 (interrupt, 0, 1) [32889] drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, 0, 1) [33017] drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, 0, 1) [33289] drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, 0, 1) [33446] drivers/input/serio/i8042.c: 32 <- i8042 (interrupt, 0, 1) [33456] drivers/input/serio/i8042.c: b2 <- i8042 (interrupt, 0, 1) [33583] drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, 0, 1) [33934] drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, 0, 1) [34032] drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, 0, 1) [34062] drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, 0, 1) [34164] drivers/input/serio/i8042.c: 22 <- i8042 (interrupt, 0, 1) [34236] drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [34345] drivers/input/serio/i8042.c: a2 <- i8042 (interrupt, 0, 1) [34369] drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [34467] drivers/input/serio/i8042.c: 36 <- i8042 (interrupt, 0, 1) [35248] drivers/input/serio/i8042.c: 36 <- i8042 (interrupt, 0, 1) [35488] drivers/input/serio/i8042.c: 36 <- i8042 (interrupt, 0, 1) [35522] drivers/input/serio/i8042.c: 36 <- i8042 (interrupt, 0, 1) [35556] drivers/input/serio/i8042.c: 34 <- i8042 (interrupt, 0, 1) [35562] drivers/input/serio/i8042.c: b4 <- i8042 (interrupt, 0, 1) [35660] drivers/input/serio/i8042.c: 34 <- i8042 (interrupt, 0, 1) [35718] drivers/input/serio/i8042.c: b4 <- i8042 (interrupt, 0, 1) [35846] drivers/input/serio/i8042.c: b6 <- i8042 (interrupt, 0, 1) [35870] drivers/input/serio/i8042.c: 39 <- i8042 (interrupt, 0, 1) [36062] drivers/input/serio/i8042.c: b9 <- i8042 (interrupt, 0, 1) [36204] drivers/input/serio/i8042.c: 20 <- i8042 (interrupt, 0, 1) [36230] drivers/input/serio/i8042.c: 32 <- i8042 (interrupt, 0, 1) [36352] drivers/input/serio/i8042.c: a0 <- i8042 (interrupt, 0, 1) [36362] drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, 0, 1) [36465] drivers/input/serio/i8042.c: b2 <- i8042 (interrupt, 0, 1) [36495] drivers/input/serio/i8042.c: 1f <- i8042 (interrupt, 0, 1) [36534] drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, 0, 1) [36608] drivers/input/serio/i8042.c: 9f <- i8042 (interrupt, 0, 1) [36686] drivers/input/serio/i8042.c: 22 <- i8042 (interrupt, 0, 1) [36761] drivers/input/serio/i8042.c: 34 <- i8042 (interrupt, 0, 1) [36874] drivers/input/serio/i8042.c: a2 <- i8042 (interrupt, 0, 1) [36893] drivers/input/serio/i8042.c: b4 <- i8042 (interrupt, 0, 1) [37021] drivers/input/serio/i8042.c: 14 <- i8042 (interrupt, 0, 1) [37104] drivers/input/serio/i8042.c: 94 <- i8042 (interrupt, 0, 1) [37226] drivers/input/serio/i8042.c: 2d <- i8042 (interrupt, 0, 1) [37374] drivers/input/serio/i8042.c: ad <- i8042 (interrupt, 0, 1) [37497] drivers/input/serio/i8042.c: 14 <- i8042 (interrupt, 0, 1) [37605] drivers/input/serio/i8042.c: 94 <- i8042 (interrupt, 0, 1) [37718] drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, 0, 1) [37739] --------------030009020307040002000100--