From: Alan Ott <alan-yzvJWuRpmD1zbRFIqnYvSA@public.gmane.org>
To: Amit Nagal <helloin.amit-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Jiri Kosina <jkosina-AlSwsSmVLrQ@public.gmane.org>,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Antonio Ospite
<ospite-aNJ+ML1ZbiP93QAQaVx+gl6hYfS7NtTn@public.gmane.org>,
Xiaofan Chen <xiaofanc-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: Re: Report ID problem with HID-RAW interface usage
Date: Fri, 02 Jul 2010 11:05:59 -0400 [thread overview]
Message-ID: <4C2E0057.30206@signal11.us> (raw)
In-Reply-To: <AANLkTilFyRjuP4VUmJolYhloDol5B7HsYV9d5SD8vZPo-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
On 07/02/2010 02:46 AM, Amit Nagal wrote:
>> 1. Your device has lots of reports, which all take the same type of data.
>>
> Yes . the device has lots of inputs and output reports .
> the report values are<command> < response> only .
>
>
>> 2. Each report differs _only_ in its length, but the data is the same. For
>> example:
>> 1. If you want to send 5 bytes to the device, you use report 1, which
>> is 5 bytes long
>> 2. If you want to send 10 bytes to the device, you use report 2,
>> which is 10 bytes long.
>> 3. if you want to send 20 bytes to the device, you use report 3,
>> which is 20 bytes long.
>> etc.
>>
> Yes. exactly . data payload len is the defining parameter to
> determine the report N to use .
>
I'm going to challenge this. I looked at the report descriptor you
attached, and I don't think it really works the way you think it does.
What it looks like to me is separate reports expecting separate data,
not a bunch of reports all expecting the same data but of different
lengths. What you describe would be fairly non-standard, IMO.
What I would suggest for the short-term is this:
With the device you have, send data based on the HID descriptor you
attached to the last email. I mean manually. In the case of your
descriptor: if the report length you want to send is <= 5, use report 1;
If it's <= 9, use report 2; if it's <= 13, use report 3; if it's <= 17,
use report 4; if it's <= 25, use report 5, etc.
This will allow you to say for sure that it works the way you think it
does. If it does, then you're right, (and I'm wrong :) ). I'm betting
though, that it won't, and that each report is expecting different types
of data than all the other reports.
Does this sound like a reasonable approach to the rest of you guys?
Alan.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2010-07-02 15:05 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-29 11:10 Report ID problem with HID-RAW interface usage Amit Nagal
[not found] ` <AANLkTinrmRsB39gj7Ie4xCr3fhP3jU1dfYuVrkiKv347-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2010-06-29 16:30 ` Alan Ott
2010-06-29 23:32 ` Xiaofan Chen
2010-06-30 7:39 ` Amit Nagal
2010-06-30 7:56 ` Amit Nagal
2010-06-30 7:57 ` Jiri Kosina
[not found] ` <4C2A1FA0.6020704-yzvJWuRpmD1zbRFIqnYvSA@public.gmane.org>
2010-06-30 9:26 ` Jiri Kosina
2010-06-30 10:30 ` Amit Nagal
[not found] ` <AANLkTilf1JU_GPlqE-FeaRon6IMqgA68WZ964PJfLpSP-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2010-06-30 10:55 ` Jiri Kosina
2010-06-30 11:14 ` Amit Nagal
2010-06-30 12:54 ` Alan Ott
2010-06-30 13:04 ` Xiaofan Chen
2010-06-30 13:06 ` Jiri Kosina
2010-06-30 14:09 ` Xiaofan Chen
[not found] ` <AANLkTil0S747k-MomthJW4dv2WwB-abjZmGmxf3fH59y-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2010-06-30 14:32 ` Alan Ott
2010-06-30 23:33 ` Xiaofan Chen
2010-06-30 13:13 ` Antonio Ospite
2010-06-30 14:02 ` Xiaofan Chen
2010-06-30 14:10 ` Alan Ott
2010-06-30 14:16 ` Antonio Ospite
2010-06-30 16:40 ` Amit Nagal
[not found] ` <AANLkTimb_xMYTZYAm51lmHEkYvrvegwbmkUyJldxYA-f-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2010-07-01 2:40 ` Xiaofan Chen
2010-07-01 13:16 ` Alan Ott
2010-07-02 6:46 ` Amit Nagal
[not found] ` <AANLkTilFyRjuP4VUmJolYhloDol5B7HsYV9d5SD8vZPo-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2010-07-02 15:05 ` Alan Ott [this message]
[not found] ` <4C2E0057.30206-yzvJWuRpmD1zbRFIqnYvSA@public.gmane.org>
2010-07-02 16:19 ` Amit Nagal
[not found] ` <alpine.LNX.2.00.1006301252380.13809-ztGlSCb7Y1iN3ZZ/Hiejyg@public.gmane.org>
2010-06-30 12:32 ` Alan Ott
[not found] ` <4C2B3956.6080107-yzvJWuRpmD1zbRFIqnYvSA@public.gmane.org>
2010-06-30 12:38 ` Jiri Kosina
2010-06-30 13:50 ` [PATCH 0/1] HID: Send Report ID when numbered reports are sent over the control endpoint Alan Ott
2010-06-30 13:50 ` [PATCH 1/1] " Alan Ott
[not found] ` <1277905836-3949-2-git-send-email-alan-yzvJWuRpmD1zbRFIqnYvSA@public.gmane.org>
2010-07-11 21:14 ` Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C2E0057.30206@signal11.us \
--to=alan-yzvjwurpmd1zbrfiqnyvsa@public.gmane.org \
--cc=helloin.amit-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=jkosina-AlSwsSmVLrQ@public.gmane.org \
--cc=linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=ospite-aNJ+ML1ZbiP93QAQaVx+gl6hYfS7NtTn@public.gmane.org \
--cc=xiaofanc-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).