* [PATCH] input/imx_keypad: add pm suspend and resume functions
@ 2011-09-30 7:54 Hui Wang
2011-09-30 8:30 ` Wanlong Gao
0 siblings, 1 reply; 7+ messages in thread
From: Hui Wang @ 2011-09-30 7:54 UTC (permalink / raw)
To: dmitry.torokhov, s.hauer, maramaopercheseimorto; +Cc: linux-input
The imx_keypad driver is set wake capable in the imx_keypad_probe(),
but it doesn't implement suspend and reusme callback interface.
>From the i.MX series MCU Reference Manual, the kpp (keypad port) is
a major wake up source which can detect any key press even in low
power modes and even when there is no clock.
Now add suspend and resume callback functions for this driver.
Signed-off-by: Hui Wang <jason77.wang@gmail.com>
---
Validated this patch both on i.MX51 PDK and i.MX31 PDK
drivers/input/keyboard/imx_keypad.c | 42 +++++++++++++++++++++++++++++++++++
1 files changed, 42 insertions(+), 0 deletions(-)
diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c
index d92c15c..9992617 100644
--- a/drivers/input/keyboard/imx_keypad.c
+++ b/drivers/input/keyboard/imx_keypad.c
@@ -567,10 +567,52 @@ static int __devexit imx_keypad_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_PM
+static int imx_kbd_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct imx_keypad *kbd = platform_get_drvdata(pdev);
+
+ clk_disable(kbd->clk);
+
+ if (device_may_wakeup(&pdev->dev))
+ enable_irq_wake(kbd->irq);
+
+ return 0;
+}
+
+static int imx_kbd_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct imx_keypad *kbd = platform_get_drvdata(pdev);
+ struct input_dev *input_dev = kbd->input_dev;
+
+ mutex_lock(&input_dev->mutex);
+
+ if (device_may_wakeup(&pdev->dev))
+ disable_irq_wake(kbd->irq);
+
+ if (input_dev->users)
+ clk_enable(kbd->clk);
+
+ mutex_unlock(&input_dev->mutex);
+
+ return 0;
+}
+
+static const struct dev_pm_ops imx_kbd_pm_ops = {
+ .suspend = imx_kbd_suspend,
+ .resume = imx_kbd_resume,
+};
+#endif
+
static struct platform_driver imx_keypad_driver = {
.driver = {
.name = "imx-keypad",
.owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .pm = &imx_kbd_pm_ops,
+#endif
},
.probe = imx_keypad_probe,
.remove = __devexit_p(imx_keypad_remove),
--
1.7.6
^ permalink raw reply related [flat|nested] 7+ messages in thread* Re: [PATCH] input/imx_keypad: add pm suspend and resume functions
2011-09-30 7:54 [PATCH] input/imx_keypad: add pm suspend and resume functions Hui Wang
@ 2011-09-30 8:30 ` Wanlong Gao
2011-09-30 8:59 ` Hui Wang
0 siblings, 1 reply; 7+ messages in thread
From: Wanlong Gao @ 2011-09-30 8:30 UTC (permalink / raw)
To: Hui Wang; +Cc: dmitry.torokhov, s.hauer, maramaopercheseimorto, linux-input
On 09/30/2011 03:54 PM, Hui Wang wrote:
> The imx_keypad driver is set wake capable in the imx_keypad_probe(),
> but it doesn't implement suspend and reusme callback interface.
>
>>From the i.MX series MCU Reference Manual, the kpp (keypad port) is
> a major wake up source which can detect any key press even in low
> power modes and even when there is no clock.
>
> Now add suspend and resume callback functions for this driver.
>
> Signed-off-by: Hui Wang <jason77.wang@gmail.com>
> ---
> Validated this patch both on i.MX51 PDK and i.MX31 PDK
>
> drivers/input/keyboard/imx_keypad.c | 42 +++++++++++++++++++++++++++++++++++
> 1 files changed, 42 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c
> index d92c15c..9992617 100644
> --- a/drivers/input/keyboard/imx_keypad.c
> +++ b/drivers/input/keyboard/imx_keypad.c
> @@ -567,10 +567,52 @@ static int __devexit imx_keypad_remove(struct platform_device *pdev)
> return 0;
> }
>
> +#ifdef CONFIG_PM
> +static int imx_kbd_suspend(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct imx_keypad *kbd = platform_get_drvdata(pdev);
> +
> + clk_disable(kbd->clk);
> +
> + if (device_may_wakeup(&pdev->dev))
> + enable_irq_wake(kbd->irq);
> +
> + return 0;
> +}
struct input_dev *input_dev = kbd->input_dev;
if (device_may_wakeup(dev)) {
enable_irq_wake(kdb->irq);
} else {
mutex_lock(&input_dev->mutex);
if (input_dev->users)
clk_disable(kbd->clk);
mutex_unlock(&input_dev->mutex);
}
right?
> +
> +static int imx_kbd_resume(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct imx_keypad *kbd = platform_get_drvdata(pdev);
> + struct input_dev *input_dev = kbd->input_dev;
> +
> + mutex_lock(&input_dev->mutex);
> +
> + if (device_may_wakeup(&pdev->dev))
> + disable_irq_wake(kbd->irq);
> +
> + if (input_dev->users)
> + clk_enable(kbd->clk);
> +
> + mutex_unlock(&input_dev->mutex);
> +
> + return 0;
> +}
struct input_dev *input_dev = kbd->input_dev;
if (device_may_wakeup(dev)) {
disable_irq_wake(kdb->irq);
} else {
mutex_lock(&input_dev->mutex);
if (input_dev->users)
clk_enable(kbd->clk);
mutex_unlock(&input_dev->mutex);
}
> +
> +static const struct dev_pm_ops imx_kbd_pm_ops = {
SIMPLE_DEV_PM_OPS?
Thanks
-Wanlong Gao
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH] input/imx_keypad: add pm suspend and resume functions
2011-09-30 8:30 ` Wanlong Gao
@ 2011-09-30 8:59 ` Hui Wang
2011-09-30 9:05 ` Wanlong Gao
2011-09-30 9:12 ` Dmitry Torokhov
0 siblings, 2 replies; 7+ messages in thread
From: Hui Wang @ 2011-09-30 8:59 UTC (permalink / raw)
To: gaowanlong
Cc: Hui Wang, dmitry.torokhov, s.hauer, maramaopercheseimorto,
linux-input
Wanlong Gao wrote:
> On 09/30/2011 03:54 PM, Hui Wang wrote:
>
>
>> The imx_keypad driver is set wake capable in the imx_keypad_probe(),
>> but it doesn't implement suspend and reusme callback interface.
>>
>> >From the i.MX series MCU Reference Manual, the kpp (keypad port) is
>> a major wake up source which can detect any key press even in low
>> power modes and even when there is no clock.
>>
>> Now add suspend and resume callback functions for this driver.
>>
>> Signed-off-by: Hui Wang <jason77.wang@gmail.com>
>> ---
>> Validated this patch both on i.MX51 PDK and i.MX31 PDK
>>
>> drivers/input/keyboard/imx_keypad.c | 42 +++++++++++++++++++++++++++++++++++
>> 1 files changed, 42 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c
>> index d92c15c..9992617 100644
>> --- a/drivers/input/keyboard/imx_keypad.c
>> +++ b/drivers/input/keyboard/imx_keypad.c
>> @@ -567,10 +567,52 @@ static int __devexit imx_keypad_remove(struct platform_device *pdev)
>> return 0;
>> }
>>
>> +#ifdef CONFIG_PM
>> +static int imx_kbd_suspend(struct device *dev)
>> +{
>> + struct platform_device *pdev = to_platform_device(dev);
>> + struct imx_keypad *kbd = platform_get_drvdata(pdev);
>> +
>> + clk_disable(kbd->clk);
>> +
>> + if (device_may_wakeup(&pdev->dev))
>> + enable_irq_wake(kbd->irq);
>> +
>> + return 0;
>> +}
>>
>
> struct input_dev *input_dev = kbd->input_dev;
> if (device_may_wakeup(dev)) {
> enable_irq_wake(kdb->irq);
> } else {
> mutex_lock(&input_dev->mutex);
>
> if (input_dev->users)
> clk_disable(kbd->clk);
>
> mutex_unlock(&input_dev->mutex);
> }
>
> right?
>
>
The i.MX series kpp is not like other normal kpps on other platforms,
the kpp on the i.MX can detect key event and wake up system from low
power mode even we disable kpp clock. So i choose to unconditionally
disable its clock. I have explain it the commit header.
"From the i.MX series MCU Reference Manual, the kpp (keypad port) is
a major wake up source which can detect any key press even in low
power modes and even when there is no clock.
"
>> +
>> +static int imx_kbd_resume(struct device *dev)
>> +{
>> + struct platform_device *pdev = to_platform_device(dev);
>> + struct imx_keypad *kbd = platform_get_drvdata(pdev);
>> + struct input_dev *input_dev = kbd->input_dev;
>> +
>> + mutex_lock(&input_dev->mutex);
>> +
>> + if (device_may_wakeup(&pdev->dev))
>> + disable_irq_wake(kbd->irq);
>> +
>> + if (input_dev->users)
>> + clk_enable(kbd->clk);
>> +
>> + mutex_unlock(&input_dev->mutex);
>> +
>> + return 0;
>> +}
>>
>
> struct input_dev *input_dev = kbd->input_dev;
> if (device_may_wakeup(dev)) {
> disable_irq_wake(kdb->irq);
> } else {
> mutex_lock(&input_dev->mutex);
>
> if (input_dev->users)
> clk_enable(kbd->clk);
>
> mutex_unlock(&input_dev->mutex);
> }
>
>
So, if we unconditionally disable kpp clock in the suspend, we don't
need above logic as well in the resume.
>> +
>> +static const struct dev_pm_ops imx_kbd_pm_ops = {
>>
>
>
> SIMPLE_DEV_PM_OPS?
>
Correct, i will use SIMPLE_DEV_PM_OPS in V2.
>
> Thanks
> -Wanlong Gao
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH] input/imx_keypad: add pm suspend and resume functions
2011-09-30 8:59 ` Hui Wang
@ 2011-09-30 9:05 ` Wanlong Gao
2011-10-09 9:47 ` Hui Wang
2011-09-30 9:12 ` Dmitry Torokhov
1 sibling, 1 reply; 7+ messages in thread
From: Wanlong Gao @ 2011-09-30 9:05 UTC (permalink / raw)
To: Hui Wang; +Cc: dmitry.torokhov, s.hauer, maramaopercheseimorto, linux-input
On 09/30/2011 04:59 PM, Hui Wang wrote:
> Wanlong Gao wrote:
>> On 09/30/2011 03:54 PM, Hui Wang wrote:
>>
>>
>>> The imx_keypad driver is set wake capable in the imx_keypad_probe(),
>>> but it doesn't implement suspend and reusme callback interface.
>>>
>>> >From the i.MX series MCU Reference Manual, the kpp (keypad port) is
>>> a major wake up source which can detect any key press even in low
>>> power modes and even when there is no clock.
>>>
>>> Now add suspend and resume callback functions for this driver.
>>>
>>> Signed-off-by: Hui Wang <jason77.wang@gmail.com>
>>> ---
>>
> The i.MX series kpp is not like other normal kpps on other platforms,
> the kpp on the i.MX can detect key event and wake up system from low
> power mode even we disable kpp clock. So i choose to unconditionally
> disable its clock. I have explain it the commit header.
>
> "From the i.MX series MCU Reference Manual, the kpp (keypad port) is
>
> a major wake up source which can detect any key press even in low
> power modes and even when there is no clock.
> "
>
I see.
>>> +
>>> +static int imx_kbd_resume(struct device *dev)
>>> +{
>>> + struct platform_device *pdev = to_platform_device(dev);
>>> + struct imx_keypad *kbd = platform_get_drvdata(pdev);
>>> + struct input_dev *input_dev = kbd->input_dev;
>>> +
>>> + mutex_lock(&input_dev->mutex);
>>> +
>>> + if (device_may_wakeup(&pdev->dev))
>>> + disable_irq_wake(kbd->irq);
>>> +
>>> + if (input_dev->users)
>>> + clk_enable(kbd->clk);
>>> +
>>> + mutex_unlock(&input_dev->mutex);
>>> +
>>> + return 0;
>>> +}
But is it need to hold a mutex lock also when *disable_irq_wake()* here ?
Thanks
-Wanlong Gao
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH] input/imx_keypad: add pm suspend and resume functions
2011-09-30 9:05 ` Wanlong Gao
@ 2011-10-09 9:47 ` Hui Wang
0 siblings, 0 replies; 7+ messages in thread
From: Hui Wang @ 2011-10-09 9:47 UTC (permalink / raw)
To: gaowanlong
Cc: Hui Wang, dmitry.torokhov, s.hauer, maramaopercheseimorto,
linux-input
Wanlong Gao wrote:
> On 09/30/2011 04:59 PM, Hui Wang wrote:
>
>
>> Wanlong Gao wrote:
>>
>>> On 09/30/2011 03:54 PM, Hui Wang wrote:
>>>
>>>
>>>
>>>> The imx_keypad driver is set wake capable in the imx_keypad_probe(),
>>>> but it doesn't implement suspend and reusme callback interface.
>>>>
>>>> >From the i.MX series MCU Reference Manual, the kpp (keypad port) is
>>>> a major wake up source which can detect any key press even in low
>>>> power modes and even when there is no clock.
>>>>
>>>> Now add suspend and resume callback functions for this driver.
>>>>
>>>> Signed-off-by: Hui Wang <jason77.wang@gmail.com>
>>>> ---
>>>>
>
>
>>>
>>>
>> The i.MX series kpp is not like other normal kpps on other platforms,
>> the kpp on the i.MX can detect key event and wake up system from low
>> power mode even we disable kpp clock. So i choose to unconditionally
>> disable its clock. I have explain it the commit header.
>>
>> "From the i.MX series MCU Reference Manual, the kpp (keypad port) is
>>
>> a major wake up source which can detect any key press even in low
>> power modes and even when there is no clock.
>> "
>>
>>
>
>
> I see.
>
>
>>>> +
>>>> +static int imx_kbd_resume(struct device *dev)
>>>> +{
>>>> + struct platform_device *pdev = to_platform_device(dev);
>>>> + struct imx_keypad *kbd = platform_get_drvdata(pdev);
>>>> + struct input_dev *input_dev = kbd->input_dev;
>>>> +
>>>> + mutex_lock(&input_dev->mutex);
>>>> +
>>>> + if (device_may_wakeup(&pdev->dev))
>>>> + disable_irq_wake(kbd->irq);
>>>> +
>>>> + if (input_dev->users)
>>>> + clk_enable(kbd->clk);
>>>> +
>>>> + mutex_unlock(&input_dev->mutex);
>>>> +
>>>> + return 0;
>>>> +}
>>>>
>
>
> But is it need to hold a mutex lock also when *disable_irq_wake()* here ?
>
Yes, this is a problem, i will address it in the V2.
Thanks,
Hui.
> Thanks
> -Wanlong Gao
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH] input/imx_keypad: add pm suspend and resume functions
2011-09-30 8:59 ` Hui Wang
2011-09-30 9:05 ` Wanlong Gao
@ 2011-09-30 9:12 ` Dmitry Torokhov
2011-10-09 9:49 ` Hui Wang
1 sibling, 1 reply; 7+ messages in thread
From: Dmitry Torokhov @ 2011-09-30 9:12 UTC (permalink / raw)
To: Hui Wang; +Cc: gaowanlong, s.hauer, maramaopercheseimorto, linux-input
On Fri, Sep 30, 2011 at 04:59:53PM +0800, Hui Wang wrote:
> Wanlong Gao wrote:
> >On 09/30/2011 03:54 PM, Hui Wang wrote:
> >>+
> >>+static int imx_kbd_resume(struct device *dev)
> >>+{
> >>+ struct platform_device *pdev = to_platform_device(dev);
> >>+ struct imx_keypad *kbd = platform_get_drvdata(pdev);
> >>+ struct input_dev *input_dev = kbd->input_dev;
> >>+
> >>+ mutex_lock(&input_dev->mutex);
> >>+
> >>+ if (device_may_wakeup(&pdev->dev))
> >>+ disable_irq_wake(kbd->irq);
> >>+
> >>+ if (input_dev->users)
> >>+ clk_enable(kbd->clk);
> >>+
> >>+ mutex_unlock(&input_dev->mutex);
> >>+
> >>+ return 0;
> >>+}
> >
> > struct input_dev *input_dev = kbd->input_dev;
> > if (device_may_wakeup(dev)) {
> > disable_irq_wake(kdb->irq);
> > } else {
> > mutex_lock(&input_dev->mutex);
> >
> > if (input_dev->users)
> > clk_enable(kbd->clk);
> >
> > mutex_unlock(&input_dev->mutex);
> > }
> >
> So, if we unconditionally disable kpp clock in the suspend, we don't
> need above logic as well in the resume.
We should not unconditionally disable clock in suspend, you need to check
if there are any users (or drop check in resume), otherwise you'll get
unbalanced count in clk (suspend - decrement, resume - not enabling clk
if device is not being used).
Also locking is needed in suspend.
Thanks.
--
Dmitry
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [PATCH] input/imx_keypad: add pm suspend and resume functions
2011-09-30 9:12 ` Dmitry Torokhov
@ 2011-10-09 9:49 ` Hui Wang
0 siblings, 0 replies; 7+ messages in thread
From: Hui Wang @ 2011-10-09 9:49 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: Hui Wang, gaowanlong, s.hauer, maramaopercheseimorto, linux-input
Dmitry Torokhov wrote:
> On Fri, Sep 30, 2011 at 04:59:53PM +0800, Hui Wang wrote:
>
>> Wanlong Gao wrote:
>>
>>> On 09/30/2011 03:54 PM, Hui Wang wrote:
>>>
>>>> +
>>>> +static int imx_kbd_resume(struct device *dev)
>>>> +{
>>>> + struct platform_device *pdev = to_platform_device(dev);
>>>> + struct imx_keypad *kbd = platform_get_drvdata(pdev);
>>>> + struct input_dev *input_dev = kbd->input_dev;
>>>> +
>>>> + mutex_lock(&input_dev->mutex);
>>>> +
>>>> + if (device_may_wakeup(&pdev->dev))
>>>> + disable_irq_wake(kbd->irq);
>>>> +
>>>> + if (input_dev->users)
>>>> + clk_enable(kbd->clk);
>>>> +
>>>> + mutex_unlock(&input_dev->mutex);
>>>> +
>>>> + return 0;
>>>> +}
>>>>
>>> struct input_dev *input_dev = kbd->input_dev;
>>> if (device_may_wakeup(dev)) {
>>> disable_irq_wake(kdb->irq);
>>> } else {
>>> mutex_lock(&input_dev->mutex);
>>>
>>> if (input_dev->users)
>>> clk_enable(kbd->clk);
>>>
>>> mutex_unlock(&input_dev->mutex);
>>> }
>>>
>>>
>> So, if we unconditionally disable kpp clock in the suspend, we don't
>> need above logic as well in the resume.
>>
>
> We should not unconditionally disable clock in suspend, you need to check
> if there are any users (or drop check in resume), otherwise you'll get
> unbalanced count in clk (suspend - decrement, resume - not enabling clk
> if device is not being used).
>
> Also locking is needed in suspend.
>
>
Got it, will fix them in the V2.
Thanks,
Hui.
> Thanks.
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2011-10-09 9:50 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-09-30 7:54 [PATCH] input/imx_keypad: add pm suspend and resume functions Hui Wang
2011-09-30 8:30 ` Wanlong Gao
2011-09-30 8:59 ` Hui Wang
2011-09-30 9:05 ` Wanlong Gao
2011-10-09 9:47 ` Hui Wang
2011-09-30 9:12 ` Dmitry Torokhov
2011-10-09 9:49 ` Hui Wang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).