[PATCH v4] input: add driver support for Sharp gp2ap002a00f proximity sensor

[PATCH v4] input: add driver support for Sharp gp2ap002a00f proximity sensor

[oskar.andero]

From: Courtney Cavin <courtney.cavin@sonyericsson.com>

Signed-off-by: Courtney Cavin <courtney.cavin@sonyericsson.com>
Signed-off-by: Oskar Andero <oskar.andero@sonyericsson.com>
---
 drivers/input/misc/Kconfig         |   10 ++
 drivers/input/misc/Makefile        |    1 +
 drivers/input/misc/gp2ap002a00f.c  |  295 ++++++++++++++++++++++++++++++++++++
 include/linux/input/gp2ap002a00f.h |   22 +++
 4 files changed, 328 insertions(+), 0 deletions(-)
 create mode 100644 drivers/input/misc/gp2ap002a00f.c
 create mode 100644 include/linux/input/gp2ap002a00f.h

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index c9104bb..3c15c52 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -527,4 +527,14 @@ config INPUT_XEN_KBDDEV_FRONTEND
 	  To compile this driver as a module, choose M here: the
 	  module will be called xen-kbdfront.
 
+config INPUT_GP2A
+	tristate "Sharp GP2AP002A00F I2C Proximity/Opto sensor driver"
+	depends on I2C
+	help
+	  Say Y here if you have a Sharp GP2AP002A00F proximity/als combo-chip
+	  hooked to an I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gp2ap002a00f.
+
 endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 299ad5e..361cf49 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_INPUT_CMA3000)		+= cma3000_d0x.o
 obj-$(CONFIG_INPUT_CMA3000_I2C)		+= cma3000_d0x_i2c.o
 obj-$(CONFIG_INPUT_COBALT_BTNS)		+= cobalt_btns.o
 obj-$(CONFIG_INPUT_DM355EVM)		+= dm355evm_keys.o
+obj-$(CONFIG_INPUT_GP2A)		+= gp2ap002a00f.o
 obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
 obj-$(CONFIG_INPUT_IXP4XX_BEEPER)	+= ixp4xx-beeper.o
 obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
diff --git a/drivers/input/misc/gp2ap002a00f.c b/drivers/input/misc/gp2ap002a00f.c
new file mode 100644
index 0000000..5be5f05
--- /dev/null
+++ b/drivers/input/misc/gp2ap002a00f.c
@@ -0,0 +1,295 @@
+/*
+ * Copyright (C) 2011 Sony Ericsson Mobile Communications Inc.
+ *
+ * Author: Courtney Cavin <courtney.cavin@sonyericsson.com>
+ * Prepared for up-stream by: Oskar Andero <oskar.andero@sonyericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/input/gp2ap002a00f.h>
+
+struct gp2a_data {
+	struct input_dev *device;
+	const struct gp2a_platform_data *pdata;
+	struct i2c_client *i2c_client;
+};
+
+enum gp2a_addr {
+	GP2A_ADDR_PROX	= 0x0,
+	GP2A_ADDR_GAIN	= 0x1,
+	GP2A_ADDR_HYS	= 0x2,
+	GP2A_ADDR_CYCLE	= 0x3,
+	GP2A_ADDR_OPMOD	= 0x4,
+	GP2A_ADDR_CON	= 0x6
+};
+
+enum gp2a_controls {
+	/* Software Shutdown control: 0 = shutdown, 1 = normal operation */
+	GP2A_CTRL_SSD	= 0x01
+};
+
+static int gp2a_enable(struct gp2a_data *dt)
+{
+	return i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_OPMOD,
+					 GP2A_CTRL_SSD);
+}
+
+static int gp2a_disable(struct gp2a_data *dt)
+{
+	return i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_OPMOD,
+					 0x00);
+}
+
+static int __devinit gp2a_initialize(struct gp2a_data *dt)
+{
+	int error;
+
+	error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_GAIN,
+					  0x08);
+	if (error < 0)
+		return error;
+
+	error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_HYS,
+					  0xc2);
+	if (error < 0)
+		return error;
+
+	error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_CYCLE,
+					  0x04);
+	if (error < 0)
+		return error;
+
+	error = gp2a_disable(dt);
+
+	return error;
+}
+
+static int gp2a_report(struct gp2a_data *dt)
+{
+	int vo = gpio_get_value(dt->pdata->vout_gpio);
+
+	input_report_switch(dt->device, SW_FRONT_PROXIMITY, !vo);
+	input_sync(dt->device);
+
+	return 0;
+}
+
+static irqreturn_t gp2a_irq(int irq, void *handle)
+{
+	struct gp2a_data *dt = handle;
+
+	gp2a_report(dt);
+
+	return IRQ_HANDLED;
+}
+
+static int gp2a_device_open(struct input_dev *dev)
+{
+	struct gp2a_data *dt = input_get_drvdata(dev);
+	int error;
+
+	error = gp2a_enable(dt);
+	if (error < 0) {
+		dev_err(&dev->dev, "unable to activate, err %d\n", error);
+		return error;
+	}
+
+	gp2a_report(dt);
+
+	return 0;
+}
+
+static void gp2a_device_close(struct input_dev *dev)
+{
+	struct gp2a_data *dt = input_get_drvdata(dev);
+	int error;
+
+	error = gp2a_disable(dt);
+	if (error < 0)
+		dev_err(&dev->dev, "unable to deactivate, err %d\n", error);
+}
+
+static int __devinit gp2a_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	const struct gp2a_platform_data *pdata;
+	struct gp2a_data *dt;
+	int error;
+
+	pdata = client->dev.platform_data;
+	if (!pdata)
+		return -EINVAL;
+
+	if (pdata->hw_setup) {
+		error = pdata->hw_setup(client);
+		if (error < 0)
+			return error;
+	}
+
+	error = gpio_direction_input(pdata->vout_gpio);
+	if (error < 0)
+		goto err_hw_shutdown;
+
+	dt = kzalloc(sizeof(struct gp2a_data), GFP_KERNEL);
+	if (!dt) {
+		error = -ENOMEM;
+		goto err_hw_shutdown;
+	}
+
+	dt->pdata = pdata;
+	dt->i2c_client = client;
+	i2c_set_clientdata(client, dt);
+
+	error = gp2a_initialize(dt);
+	if (error < 0)
+		goto err_free_mem;
+
+	dt->device = input_allocate_device();
+	if (!dt->device) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+	input_set_drvdata(dt->device, dt);
+
+	dt->device->open = gp2a_device_open;
+	dt->device->close = gp2a_device_close;
+	dt->device->name = GP2A_I2C_NAME;
+	dt->device->id.bustype = BUS_I2C;
+
+	input_set_capability(dt->device, EV_SW, SW_FRONT_PROXIMITY);
+
+	error = request_threaded_irq(client->irq, NULL,
+			gp2a_irq, IRQF_TRIGGER_RISING |
+			IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+			GP2A_I2C_NAME, dt);
+	if (error) {
+		dev_err(&dt->device->dev, "irq request failed\n");
+		goto err_free_input_dev;
+	}
+
+	error = input_register_device(dt->device);
+	if (error) {
+		dev_err(&dt->device->dev, "device registration failed\n");
+		goto err_free_irq;
+	}
+
+	device_init_wakeup(&client->dev, pdata->wakeup);
+
+	return 0;
+
+err_free_irq:
+	free_irq(client->irq, dt);
+err_free_input_dev:
+	input_free_device(dt->device);
+err_free_mem:
+	kfree(dt);
+err_hw_shutdown:
+	if (pdata->hw_shutdown)
+		pdata->hw_shutdown(client);
+	return error;
+}
+
+static int __devexit gp2a_remove(struct i2c_client *client)
+{
+	struct gp2a_data *dt = i2c_get_clientdata(client);
+
+	device_init_wakeup(&client->dev, false);
+
+	free_irq(client->irq, dt);
+	input_unregister_device(dt->device);
+	if (dt->pdata->hw_shutdown)
+		dt->pdata->hw_shutdown(client);
+	kfree(dt);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int gp2a_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct gp2a_data *dt = i2c_get_clientdata(client);
+	int error;
+
+	mutex_lock(&dt->device->mutex);
+
+	if (device_may_wakeup(&client->dev)) {
+		enable_irq_wake(client->irq);
+	} else if (dt->device->users) {
+		error = gp2a_disable(dt);
+		if (error < 0)
+			return error;
+	}
+
+	mutex_unlock(&dt->device->mutex);
+
+	return 0;
+}
+
+static int gp2a_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct gp2a_data *dt = i2c_get_clientdata(client);
+	int error;
+
+	mutex_lock(&dt->device->mutex);
+
+	if (device_may_wakeup(&client->dev)) {
+		disable_irq_wake(client->irq);
+	} else if (dt->device->users) {
+		error = gp2a_enable(dt);
+		if (error < 0)
+			return error;
+	}
+
+	mutex_unlock(&dt->device->mutex);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(gp2a_pm, gp2a_suspend, gp2a_resume);
+
+static const struct i2c_device_id gp2a_i2c_id[] = {
+	{ GP2A_I2C_NAME, 0 },
+	{ }
+};
+
+static struct i2c_driver gp2a_i2c_driver = {
+	.driver = {
+		.name	= GP2A_I2C_NAME,
+		.owner	= THIS_MODULE,
+		.pm	= &gp2a_pm
+	},
+	.probe		= gp2a_probe,
+	.remove		= __devexit_p(gp2a_remove),
+	.id_table	= gp2a_i2c_id
+};
+
+static int __init gp2a_init(void)
+{
+	return i2c_add_driver(&gp2a_i2c_driver);
+}
+
+static void __exit gp2a_exit(void)
+{
+	i2c_del_driver(&gp2a_i2c_driver);
+}
+
+module_init(gp2a_init);
+module_exit(gp2a_exit);
+
+MODULE_AUTHOR("Courtney Cavin <courtney.cavin@sonyericsson.com>");
+MODULE_DESCRIPTION("Sharp GP2AP002A00F I2C Proximity/Opto sensor driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/input/gp2ap002a00f.h b/include/linux/input/gp2ap002a00f.h
new file mode 100644
index 0000000..aad2fd4
--- /dev/null
+++ b/include/linux/input/gp2ap002a00f.h
@@ -0,0 +1,22 @@
+#ifndef _GP2AP002A00F_H_
+#define _GP2AP002A00F_H_
+
+#include <linux/i2c.h>
+
+#define GP2A_I2C_NAME "gp2ap002a00f"
+
+/**
+ * struct gp2a_platform_data - Sharp gp2ap002a00f proximity platform data
+ * @vout_gpio: The gpio connected to the object detected pin (VOUT)
+ * @wakeup: Set to true if the proximity can wake the device from suspend
+ * @hw_setup: Callback for setting up hardware such as gpios and vregs
+ * @hw_shutdown: Callback for properly shutting down hardware
+ */
+struct gp2a_platform_data {
+	int vout_gpio;
+	bool wakeup;
+	int (*hw_setup)(struct i2c_client *client);
+	int (*hw_shutdown)(struct i2c_client *client);
+};
+
+#endif
-- 
1.7.7.GIT

Re: [PATCH v4] input: add driver support for Sharp gp2ap002a00f proximity sensor

[Shubhrajyoti]

Hi  Oskar,



On Wednesday 23 November 2011 01:54 PM, oskar.andero@sonyericsson.com
wrote:
> From: Courtney Cavin <courtney.cavin@sonyericsson.com>
You may want to add some more description.

> Signed-off-by: Courtney Cavin <courtney.cavin@sonyericsson.com>
> Signed-off-by: Oskar Andero <oskar.andero@sonyericsson.com>
> ---
>  drivers/input/misc/Kconfig         |   10 ++
>  drivers/input/misc/Makefile        |    1 +
>  drivers/input/misc/gp2ap002a00f.c  |  295 ++++++++++++++++++++++++++++++++++++
>  include/linux/input/gp2ap002a00f.h |   22 +++
>  4 files changed, 328 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/input/misc/gp2ap002a00f.c
>  create mode 100644 include/linux/input/gp2ap002a00f.h
>
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index c9104bb..3c15c52 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -527,4 +527,14 @@ config INPUT_XEN_KBDDEV_FRONTEND
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called xen-kbdfront.
>  
> +config INPUT_GP2A
> +	tristate "Sharp GP2AP002A00F I2C Proximity/Opto sensor driver"
> +	depends on I2C
> +	help
> +	  Say Y here if you have a Sharp GP2AP002A00F proximity/als combo-chip
> +	  hooked to an I2C bus.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called gp2ap002a00f.
> +
>  endif
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index 299ad5e..361cf49 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -22,6 +22,7 @@ obj-$(CONFIG_INPUT_CMA3000)		+= cma3000_d0x.o
>  obj-$(CONFIG_INPUT_CMA3000_I2C)		+= cma3000_d0x_i2c.o
>  obj-$(CONFIG_INPUT_COBALT_BTNS)		+= cobalt_btns.o
>  obj-$(CONFIG_INPUT_DM355EVM)		+= dm355evm_keys.o
> +obj-$(CONFIG_INPUT_GP2A)		+= gp2ap002a00f.o
>  obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
>  obj-$(CONFIG_INPUT_IXP4XX_BEEPER)	+= ixp4xx-beeper.o
>  obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
> diff --git a/drivers/input/misc/gp2ap002a00f.c b/drivers/input/misc/gp2ap002a00f.c
> new file mode 100644
> index 0000000..5be5f05
> --- /dev/null
> +++ b/drivers/input/misc/gp2ap002a00f.c
> @@ -0,0 +1,295 @@
> +/*
> + * Copyright (C) 2011 Sony Ericsson Mobile Communications Inc.
> + *
> + * Author: Courtney Cavin <courtney.cavin@sonyericsson.com>
> + * Prepared for up-stream by: Oskar Andero <oskar.andero@sonyericsson.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2, as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/irq.h>
> +#include <linux/slab.h>
> +#include <linux/input.h>
> +#include <linux/module.h>
> +#include <linux/interrupt.h>
> +#include <linux/gpio.h>
> +#include <linux/delay.h>
> +#include <linux/input/gp2ap002a00f.h>
> +
> +struct gp2a_data {
> +	struct input_dev *device;
> +	const struct gp2a_platform_data *pdata;
> +	struct i2c_client *i2c_client;
> +};
> +
> +enum gp2a_addr {
> +	GP2A_ADDR_PROX	= 0x0,
> +	GP2A_ADDR_GAIN	= 0x1,
> +	GP2A_ADDR_HYS	= 0x2,
> +	GP2A_ADDR_CYCLE	= 0x3,
> +	GP2A_ADDR_OPMOD	= 0x4,
> +	GP2A_ADDR_CON	= 0x6
> +};
> +
> +enum gp2a_controls {
> +	/* Software Shutdown control: 0 = shutdown, 1 = normal operation */
> +	GP2A_CTRL_SSD	= 0x01
> +};
> +
> +static int gp2a_enable(struct gp2a_data *dt)
> +{
> +	return i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_OPMOD,
> +					 GP2A_CTRL_SSD);
> +}
> +
> +static int gp2a_disable(struct gp2a_data *dt)
> +{
> +	return i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_OPMOD,
> +					 0x00);
> +}
> +
> +static int __devinit gp2a_initialize(struct gp2a_data *dt)
> +{
> +	int error;
> +
> +	error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_GAIN,
> +					  0x08);
> +	if (error < 0)
> +		return error;
> +
> +	error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_HYS,
> +					  0xc2);
> +	if (error < 0)
> +		return error;
> +
> +	error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_CYCLE,
> +					  0x04);
> +	if (error < 0)
> +		return error;
> +
> +	error = gp2a_disable(dt);
> +
> +	return error;
> +}
> +
> +static int gp2a_report(struct gp2a_data *dt)
> +{
> +	int vo = gpio_get_value(dt->pdata->vout_gpio);
> +
> +	input_report_switch(dt->device, SW_FRONT_PROXIMITY, !vo);
> +	input_sync(dt->device);
> +
> +	return 0;
> +}
> +
> +static irqreturn_t gp2a_irq(int irq, void *handle)
> +{
> +	struct gp2a_data *dt = handle;
> +
> +	gp2a_report(dt);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int gp2a_device_open(struct input_dev *dev)
> +{
> +	struct gp2a_data *dt = input_get_drvdata(dev);
> +	int error;
> +
> +	error = gp2a_enable(dt);
> +	if (error < 0) {
> +		dev_err(&dev->dev, "unable to activate, err %d\n", error);
> +		return error;
> +	}
> +
> +	gp2a_report(dt);
> +
> +	return 0;
> +}
> +
> +static void gp2a_device_close(struct input_dev *dev)
> +{
> +	struct gp2a_data *dt = input_get_drvdata(dev);
> +	int error;
> +
> +	error = gp2a_disable(dt);
> +	if (error < 0)
> +		dev_err(&dev->dev, "unable to deactivate, err %d\n", error);
> +}
> +
> +static int __devinit gp2a_probe(struct i2c_client *client,
> +				const struct i2c_device_id *id)
> +{
> +	const struct gp2a_platform_data *pdata;
> +	struct gp2a_data *dt;
> +	int error;
> +
> +	pdata = client->dev.platform_data;
> +	if (!pdata)
> +		return -EINVAL;
> +
> +	if (pdata->hw_setup) {
> +		error = pdata->hw_setup(client);
> +		if (error < 0)
> +			return error;
> +	}
> +
> +	error = gpio_direction_input(pdata->vout_gpio);
> +	if (error < 0)
> +		goto err_hw_shutdown;
> +
> +	dt = kzalloc(sizeof(struct gp2a_data), GFP_KERNEL);
> +	if (!dt) {
> +		error = -ENOMEM;
> +		goto err_hw_shutdown;
> +	}
> +
> +	dt->pdata = pdata;
> +	dt->i2c_client = client;
> +	i2c_set_clientdata(client, dt);
> +
> +	error = gp2a_initialize(dt);
> +	if (error < 0)
> +		goto err_free_mem;
> +
> +	dt->device = input_allocate_device();
> +	if (!dt->device) {
> +		error = -ENOMEM;
> +		goto err_free_mem;
> +	}
> +	input_set_drvdata(dt->device, dt);
> +
> +	dt->device->open = gp2a_device_open;
> +	dt->device->close = gp2a_device_close;
> +	dt->device->name = GP2A_I2C_NAME;
> +	dt->device->id.bustype = BUS_I2C;
> +
> +	input_set_capability(dt->device, EV_SW, SW_FRONT_PROXIMITY);
> +
> +	error = request_threaded_irq(client->irq, NULL,
> +			gp2a_irq, IRQF_TRIGGER_RISING |
> +			IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> +			GP2A_I2C_NAME, dt);
> +	if (error) {
> +		dev_err(&dt->device->dev, "irq request failed\n");
> +		goto err_free_input_dev;
> +	}
> +
> +	error = input_register_device(dt->device);
> +	if (error) {
> +		dev_err(&dt->device->dev, "device registration failed\n");
> +		goto err_free_irq;
> +	}
> +
> +	device_init_wakeup(&client->dev, pdata->wakeup);
> +
> +	return 0;
> +
> +err_free_irq:
> +	free_irq(client->irq, dt);
> +err_free_input_dev:
> +	input_free_device(dt->device);
> +err_free_mem:
> +	kfree(dt);
> +err_hw_shutdown:
> +	if (pdata->hw_shutdown)
> +		pdata->hw_shutdown(client);
> +	return error;
> +}
> +
> +static int __devexit gp2a_remove(struct i2c_client *client)
> +{
> +	struct gp2a_data *dt = i2c_get_clientdata(client);
> +
> +	device_init_wakeup(&client->dev, false);
> +
> +	free_irq(client->irq, dt);
> +	input_unregister_device(dt->device);
> +	if (dt->pdata->hw_shutdown)
> +		dt->pdata->hw_shutdown(client);
> +	kfree(dt);
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int gp2a_suspend(struct device *dev)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct gp2a_data *dt = i2c_get_clientdata(client);
> +	int error;
> +
> +	mutex_lock(&dt->device->mutex);
> +
> +	if (device_may_wakeup(&client->dev)) {
> +		enable_irq_wake(client->irq);
> +	} else if (dt->device->users) {
> +		error = gp2a_disable(dt);
> +		if (error < 0)
> +			return error;
> +	}
> +
> +	mutex_unlock(&dt->device->mutex);
> +
> +	return 0;
> +}
> +
> +static int gp2a_resume(struct device *dev)
> +{
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct gp2a_data *dt = i2c_get_clientdata(client);
> +	int error;
> +
> +	mutex_lock(&dt->device->mutex);
> +
> +	if (device_may_wakeup(&client->dev)) {
> +		disable_irq_wake(client->irq);
> +	} else if (dt->device->users) {
> +		error = gp2a_enable(dt);
> +		if (error < 0)
> +			return error;
> +	}
> +
> +	mutex_unlock(&dt->device->mutex);
> +
> +	return 0;
> +}
> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(gp2a_pm, gp2a_suspend, gp2a_resume);
> +
> +static const struct i2c_device_id gp2a_i2c_id[] = {
> +	{ GP2A_I2C_NAME, 0 },
> +	{ }
> +};
> +
> +static struct i2c_driver gp2a_i2c_driver = {
> +	.driver = {
> +		.name	= GP2A_I2C_NAME,
> +		.owner	= THIS_MODULE,
> +		.pm	= &gp2a_pm

This might give a compilation break 
fixing which feel free to add a
Reviewed-by: Datta Shubhrajyoti <shubhrajyoti@ti.com>
> +	},
> +	.probe		= gp2a_probe,
> +	.remove		= __devexit_p(gp2a_remove),
> +	.id_table	= gp2a_i2c_id
> +};
> +
> +static int __init gp2a_init(void)
> +{
> +	return i2c_add_driver(&gp2a_i2c_driver);
> +}
> +
> +static void __exit gp2a_exit(void)
> +{
> +	i2c_del_driver(&gp2a_i2c_driver);
> +}
> +
> +module_init(gp2a_init);
> +module_exit(gp2a_exit);
> +
> +MODULE_AUTHOR("Courtney Cavin <courtney.cavin@sonyericsson.com>");
> +MODULE_DESCRIPTION("Sharp GP2AP002A00F I2C Proximity/Opto sensor driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/input/gp2ap002a00f.h b/include/linux/input/gp2ap002a00f.h
> new file mode 100644
> index 0000000..aad2fd4
> --- /dev/null
> +++ b/include/linux/input/gp2ap002a00f.h
> @@ -0,0 +1,22 @@
> +#ifndef _GP2AP002A00F_H_
> +#define _GP2AP002A00F_H_
> +
> +#include <linux/i2c.h>
> +
> +#define GP2A_I2C_NAME "gp2ap002a00f"
> +
> +/**
> + * struct gp2a_platform_data - Sharp gp2ap002a00f proximity platform data
> + * @vout_gpio: The gpio connected to the object detected pin (VOUT)
> + * @wakeup: Set to true if the proximity can wake the device from suspend
> + * @hw_setup: Callback for setting up hardware such as gpios and vregs
> + * @hw_shutdown: Callback for properly shutting down hardware
> + */
> +struct gp2a_platform_data {
> +	int vout_gpio;
> +	bool wakeup;
> +	int (*hw_setup)(struct i2c_client *client);
> +	int (*hw_shutdown)(struct i2c_client *client);
> +};
> +
> +#endif

Re: [PATCH v4] input: add driver support for Sharp gp2ap002a00f proximity sensor

[oskar.andero]

Hi Shubhrajyoti,

Thanks for reviewing!

On 12:24 Wed 23 Nov     , Shubhrajyoti wrote:
> 
> Hi  Oskar,
> 
> 
> 
> On Wednesday 23 November 2011 01:54 PM, oskar.andero@sonyericsson.com
> wrote:
> > From: Courtney Cavin <courtney.cavin@sonyericsson.com>
> You may want to add some more description.
>
> > Signed-off-by: Courtney Cavin <courtney.cavin@sonyericsson.com>
> > Signed-off-by: Oskar Andero <oskar.andero@sonyericsson.com>
> > ---
> >  drivers/input/misc/Kconfig         |   10 ++
> >  drivers/input/misc/Makefile        |    1 +
> >  drivers/input/misc/gp2ap002a00f.c  |  295 ++++++++++++++++++++++++++++++++++++
> >  include/linux/input/gp2ap002a00f.h |   22 +++
> >  4 files changed, 328 insertions(+), 0 deletions(-)
> >  create mode 100644 drivers/input/misc/gp2ap002a00f.c
> >  create mode 100644 include/linux/input/gp2ap002a00f.h
> >
> > diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> > index c9104bb..3c15c52 100644
> > --- a/drivers/input/misc/Kconfig
> > +++ b/drivers/input/misc/Kconfig
> > @@ -527,4 +527,14 @@ config INPUT_XEN_KBDDEV_FRONTEND
> >  	  To compile this driver as a module, choose M here: the
> >  	  module will be called xen-kbdfront.
> >  
> > +config INPUT_GP2A
> > +	tristate "Sharp GP2AP002A00F I2C Proximity/Opto sensor driver"
> > +	depends on I2C
> > +	help
> > +	  Say Y here if you have a Sharp GP2AP002A00F proximity/als combo-chip
> > +	  hooked to an I2C bus.
> > +
> > +	  To compile this driver as a module, choose M here: the
> > +	  module will be called gp2ap002a00f.
> > +
> >  endif
> > diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> > index 299ad5e..361cf49 100644
> > --- a/drivers/input/misc/Makefile
> > +++ b/drivers/input/misc/Makefile
> > @@ -22,6 +22,7 @@ obj-$(CONFIG_INPUT_CMA3000)		+= cma3000_d0x.o
> >  obj-$(CONFIG_INPUT_CMA3000_I2C)		+= cma3000_d0x_i2c.o
> >  obj-$(CONFIG_INPUT_COBALT_BTNS)		+= cobalt_btns.o
> >  obj-$(CONFIG_INPUT_DM355EVM)		+= dm355evm_keys.o
> > +obj-$(CONFIG_INPUT_GP2A)		+= gp2ap002a00f.o
> >  obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
> >  obj-$(CONFIG_INPUT_IXP4XX_BEEPER)	+= ixp4xx-beeper.o
> >  obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
> > diff --git a/drivers/input/misc/gp2ap002a00f.c b/drivers/input/misc/gp2ap002a00f.c
> > new file mode 100644
> > index 0000000..5be5f05
> > --- /dev/null
> > +++ b/drivers/input/misc/gp2ap002a00f.c
> > @@ -0,0 +1,295 @@
> > +/*
> > + * Copyright (C) 2011 Sony Ericsson Mobile Communications Inc.
> > + *
> > + * Author: Courtney Cavin <courtney.cavin@sonyericsson.com>
> > + * Prepared for up-stream by: Oskar Andero <oskar.andero@sonyericsson.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2, as
> > + * published by the Free Software Foundation.
> > + */
> > +
> > +#include <linux/i2c.h>
> > +#include <linux/irq.h>
> > +#include <linux/slab.h>
> > +#include <linux/input.h>
> > +#include <linux/module.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/gpio.h>
> > +#include <linux/delay.h>
> > +#include <linux/input/gp2ap002a00f.h>
> > +
> > +struct gp2a_data {
> > +	struct input_dev *device;
> > +	const struct gp2a_platform_data *pdata;
> > +	struct i2c_client *i2c_client;
> > +};
> > +
> > +enum gp2a_addr {
> > +	GP2A_ADDR_PROX	= 0x0,
> > +	GP2A_ADDR_GAIN	= 0x1,
> > +	GP2A_ADDR_HYS	= 0x2,
> > +	GP2A_ADDR_CYCLE	= 0x3,
> > +	GP2A_ADDR_OPMOD	= 0x4,
> > +	GP2A_ADDR_CON	= 0x6
> > +};
> > +
> > +enum gp2a_controls {
> > +	/* Software Shutdown control: 0 = shutdown, 1 = normal operation */
> > +	GP2A_CTRL_SSD	= 0x01
> > +};
> > +
> > +static int gp2a_enable(struct gp2a_data *dt)
> > +{
> > +	return i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_OPMOD,
> > +					 GP2A_CTRL_SSD);
> > +}
> > +
> > +static int gp2a_disable(struct gp2a_data *dt)
> > +{
> > +	return i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_OPMOD,
> > +					 0x00);
> > +}
> > +
> > +static int __devinit gp2a_initialize(struct gp2a_data *dt)
> > +{
> > +	int error;
> > +
> > +	error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_GAIN,
> > +					  0x08);
> > +	if (error < 0)
> > +		return error;
> > +
> > +	error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_HYS,
> > +					  0xc2);
> > +	if (error < 0)
> > +		return error;
> > +
> > +	error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_CYCLE,
> > +					  0x04);
> > +	if (error < 0)
> > +		return error;
> > +
> > +	error = gp2a_disable(dt);
> > +
> > +	return error;
> > +}
> > +
> > +static int gp2a_report(struct gp2a_data *dt)
> > +{
> > +	int vo = gpio_get_value(dt->pdata->vout_gpio);
> > +
> > +	input_report_switch(dt->device, SW_FRONT_PROXIMITY, !vo);
> > +	input_sync(dt->device);
> > +
> > +	return 0;
> > +}
> > +
> > +static irqreturn_t gp2a_irq(int irq, void *handle)
> > +{
> > +	struct gp2a_data *dt = handle;
> > +
> > +	gp2a_report(dt);
> > +
> > +	return IRQ_HANDLED;
> > +}
> > +
> > +static int gp2a_device_open(struct input_dev *dev)
> > +{
> > +	struct gp2a_data *dt = input_get_drvdata(dev);
> > +	int error;
> > +
> > +	error = gp2a_enable(dt);
> > +	if (error < 0) {
> > +		dev_err(&dev->dev, "unable to activate, err %d\n", error);
> > +		return error;
> > +	}
> > +
> > +	gp2a_report(dt);
> > +
> > +	return 0;
> > +}
> > +
> > +static void gp2a_device_close(struct input_dev *dev)
> > +{
> > +	struct gp2a_data *dt = input_get_drvdata(dev);
> > +	int error;
> > +
> > +	error = gp2a_disable(dt);
> > +	if (error < 0)
> > +		dev_err(&dev->dev, "unable to deactivate, err %d\n", error);
> > +}
> > +
> > +static int __devinit gp2a_probe(struct i2c_client *client,
> > +				const struct i2c_device_id *id)
> > +{
> > +	const struct gp2a_platform_data *pdata;
> > +	struct gp2a_data *dt;
> > +	int error;
> > +
> > +	pdata = client->dev.platform_data;
> > +	if (!pdata)
> > +		return -EINVAL;
> > +
> > +	if (pdata->hw_setup) {
> > +		error = pdata->hw_setup(client);
> > +		if (error < 0)
> > +			return error;
> > +	}
> > +
> > +	error = gpio_direction_input(pdata->vout_gpio);
> > +	if (error < 0)
> > +		goto err_hw_shutdown;
> > +
> > +	dt = kzalloc(sizeof(struct gp2a_data), GFP_KERNEL);
> > +	if (!dt) {
> > +		error = -ENOMEM;
> > +		goto err_hw_shutdown;
> > +	}
> > +
> > +	dt->pdata = pdata;
> > +	dt->i2c_client = client;
> > +	i2c_set_clientdata(client, dt);
> > +
> > +	error = gp2a_initialize(dt);
> > +	if (error < 0)
> > +		goto err_free_mem;
> > +
> > +	dt->device = input_allocate_device();
> > +	if (!dt->device) {
> > +		error = -ENOMEM;
> > +		goto err_free_mem;
> > +	}
> > +	input_set_drvdata(dt->device, dt);
> > +
> > +	dt->device->open = gp2a_device_open;
> > +	dt->device->close = gp2a_device_close;
> > +	dt->device->name = GP2A_I2C_NAME;
> > +	dt->device->id.bustype = BUS_I2C;
> > +
> > +	input_set_capability(dt->device, EV_SW, SW_FRONT_PROXIMITY);
> > +
> > +	error = request_threaded_irq(client->irq, NULL,
> > +			gp2a_irq, IRQF_TRIGGER_RISING |
> > +			IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
> > +			GP2A_I2C_NAME, dt);
> > +	if (error) {
> > +		dev_err(&dt->device->dev, "irq request failed\n");
> > +		goto err_free_input_dev;
> > +	}
> > +
> > +	error = input_register_device(dt->device);
> > +	if (error) {
> > +		dev_err(&dt->device->dev, "device registration failed\n");
> > +		goto err_free_irq;
> > +	}
> > +
> > +	device_init_wakeup(&client->dev, pdata->wakeup);
> > +
> > +	return 0;
> > +
> > +err_free_irq:
> > +	free_irq(client->irq, dt);
> > +err_free_input_dev:
> > +	input_free_device(dt->device);
> > +err_free_mem:
> > +	kfree(dt);
> > +err_hw_shutdown:
> > +	if (pdata->hw_shutdown)
> > +		pdata->hw_shutdown(client);
> > +	return error;
> > +}
> > +
> > +static int __devexit gp2a_remove(struct i2c_client *client)
> > +{
> > +	struct gp2a_data *dt = i2c_get_clientdata(client);
> > +
> > +	device_init_wakeup(&client->dev, false);
> > +
> > +	free_irq(client->irq, dt);
> > +	input_unregister_device(dt->device);
> > +	if (dt->pdata->hw_shutdown)
> > +		dt->pdata->hw_shutdown(client);
> > +	kfree(dt);
> > +
> > +	return 0;
> > +}
> > +
> > +#ifdef CONFIG_PM_SLEEP
> > +static int gp2a_suspend(struct device *dev)
> > +{
> > +	struct i2c_client *client = to_i2c_client(dev);
> > +	struct gp2a_data *dt = i2c_get_clientdata(client);
> > +	int error;
> > +
> > +	mutex_lock(&dt->device->mutex);
> > +
> > +	if (device_may_wakeup(&client->dev)) {
> > +		enable_irq_wake(client->irq);
> > +	} else if (dt->device->users) {
> > +		error = gp2a_disable(dt);
> > +		if (error < 0)
> > +			return error;
> > +	}
> > +
> > +	mutex_unlock(&dt->device->mutex);
> > +
> > +	return 0;
> > +}
> > +
> > +static int gp2a_resume(struct device *dev)
> > +{
> > +	struct i2c_client *client = to_i2c_client(dev);
> > +	struct gp2a_data *dt = i2c_get_clientdata(client);
> > +	int error;
> > +
> > +	mutex_lock(&dt->device->mutex);
> > +
> > +	if (device_may_wakeup(&client->dev)) {
> > +		disable_irq_wake(client->irq);
> > +	} else if (dt->device->users) {
> > +		error = gp2a_enable(dt);
> > +		if (error < 0)
> > +			return error;
> > +	}
> > +
> > +	mutex_unlock(&dt->device->mutex);
> > +
> > +	return 0;
> > +}
> > +#endif
> > +
> > +static SIMPLE_DEV_PM_OPS(gp2a_pm, gp2a_suspend, gp2a_resume);
> > +
> > +static const struct i2c_device_id gp2a_i2c_id[] = {
> > +	{ GP2A_I2C_NAME, 0 },
> > +	{ }
> > +};
> > +
> > +static struct i2c_driver gp2a_i2c_driver = {
> > +	.driver = {
> > +		.name	= GP2A_I2C_NAME,
> > +		.owner	= THIS_MODULE,
> > +		.pm	= &gp2a_pm
> 
> This might give a compilation break 
> fixing which feel free to add a
> Reviewed-by: Datta Shubhrajyoti <shubhrajyoti@ti.com>

Why would this cause compilation break? If you are thinking of when
CONFIG_PM_SLEEP is not defined, please bare in mind that
the SIMPLE_DEV_PM_OPS-macro will give you an empty gp2a_pm-struct and
hence no build error.

> > +	},
> > +	.probe		= gp2a_probe,
> > +	.remove		= __devexit_p(gp2a_remove),
> > +	.id_table	= gp2a_i2c_id
> > +};
> > +
> > +static int __init gp2a_init(void)
> > +{
> > +	return i2c_add_driver(&gp2a_i2c_driver);
> > +}
> > +
> > +static void __exit gp2a_exit(void)
> > +{
> > +	i2c_del_driver(&gp2a_i2c_driver);
> > +}
> > +
> > +module_init(gp2a_init);
> > +module_exit(gp2a_exit);
> > +
> > +MODULE_AUTHOR("Courtney Cavin <courtney.cavin@sonyericsson.com>");
> > +MODULE_DESCRIPTION("Sharp GP2AP002A00F I2C Proximity/Opto sensor driver");
> > +MODULE_LICENSE("GPL v2");
> > diff --git a/include/linux/input/gp2ap002a00f.h b/include/linux/input/gp2ap002a00f.h
> > new file mode 100644
> > index 0000000..aad2fd4
> > --- /dev/null
> > +++ b/include/linux/input/gp2ap002a00f.h
> > @@ -0,0 +1,22 @@
> > +#ifndef _GP2AP002A00F_H_
> > +#define _GP2AP002A00F_H_
> > +
> > +#include <linux/i2c.h>
> > +
> > +#define GP2A_I2C_NAME "gp2ap002a00f"
> > +
> > +/**
> > + * struct gp2a_platform_data - Sharp gp2ap002a00f proximity platform data
> > + * @vout_gpio: The gpio connected to the object detected pin (VOUT)
> > + * @wakeup: Set to true if the proximity can wake the device from suspend
> > + * @hw_setup: Callback for setting up hardware such as gpios and vregs
> > + * @hw_shutdown: Callback for properly shutting down hardware
> > + */
> > +struct gp2a_platform_data {
> > +	int vout_gpio;
> > +	bool wakeup;
> > +	int (*hw_setup)(struct i2c_client *client);
> > +	int (*hw_shutdown)(struct i2c_client *client);
> > +};
> > +
> > +#endif
> 

-Oskar

Re: [PATCH v4] input: add driver support for Sharp gp2ap002a00f proximity sensor

[Shubhrajyoti]

On Wednesday 23 November 2011 06:00 PM, oskar.andero@sonyericsson.com
wrote:
> Hi Shubhrajyoti,
>
> Thanks for reviewing!
>
> On 12:24 Wed 23 Nov     , Shubhrajyoti wrote:
>> Hi  Oskar,
>>
>>
>>
>> On Wednesday 23 November 2011 01:54 PM, oskar.andero@sonyericsson.com
>> wrote:
>>> From: Courtney Cavin <courtney.cavin@sonyericsson.com>
>> You may want to add some more description.
>>
>>> Signed-off-by: Courtney Cavin <courtney.cavin@sonyericsson.com>
>>> Signed-off-by: Oskar Andero <oskar.andero@sonyericsson.com>
>>> ---
>>>  drivers/input/misc/Kconfig         |   10 ++
>>>  drivers/input/misc/Makefile        |    1 +
>>>  drivers/input/misc/gp2ap002a00f.c  |  295 ++++++++++++++++++++++++++++++++++++
>>>  include/linux/input/gp2ap002a00f.h |   22 +++
>>>  4 files changed, 328 insertions(+), 0 deletions(-)
>>>  create mode 100644 drivers/input/misc/gp2ap002a00f.c
>>>  create mode 100644 include/linux/input/gp2ap002a00f.h
>>>
>>> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
>>> index c9104bb..3c15c52 100644
>>> --- a/drivers/input/misc/Kconfig
>>> +++ b/drivers/input/misc/Kconfig
>>> @@ -527,4 +527,14 @@ config INPUT_XEN_KBDDEV_FRONTEND
>>>  	  To compile this driver as a module, choose M here: the
>>>  	  module will be called xen-kbdfront.
>>>  
>>> +config INPUT_GP2A
>>> +	tristate "Sharp GP2AP002A00F I2C Proximity/Opto sensor driver"
>>> +	depends on I2C
>>> +	help
>>> +	  Say Y here if you have a Sharp GP2AP002A00F proximity/als combo-chip
>>> +	  hooked to an I2C bus.
>>> +
>>> +	  To compile this driver as a module, choose M here: the
>>> +	  module will be called gp2ap002a00f.
>>> +
>>>  endif
>>> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
>>> index 299ad5e..361cf49 100644
>>> --- a/drivers/input/misc/Makefile
>>> +++ b/drivers/input/misc/Makefile
>>> @@ -22,6 +22,7 @@ obj-$(CONFIG_INPUT_CMA3000)		+= cma3000_d0x.o
>>>  obj-$(CONFIG_INPUT_CMA3000_I2C)		+= cma3000_d0x_i2c.o
>>>  obj-$(CONFIG_INPUT_COBALT_BTNS)		+= cobalt_btns.o
>>>  obj-$(CONFIG_INPUT_DM355EVM)		+= dm355evm_keys.o
>>> +obj-$(CONFIG_INPUT_GP2A)		+= gp2ap002a00f.o
>>>  obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
>>>  obj-$(CONFIG_INPUT_IXP4XX_BEEPER)	+= ixp4xx-beeper.o
>>>  obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
>>> diff --git a/drivers/input/misc/gp2ap002a00f.c b/drivers/input/misc/gp2ap002a00f.c
>>> new file mode 100644
>>> index 0000000..5be5f05
>>> --- /dev/null
>>> +++ b/drivers/input/misc/gp2ap002a00f.c
>>> @@ -0,0 +1,295 @@
>>> +/*
>>> + * Copyright (C) 2011 Sony Ericsson Mobile Communications Inc.
>>> + *
>>> + * Author: Courtney Cavin <courtney.cavin@sonyericsson.com>
>>> + * Prepared for up-stream by: Oskar Andero <oskar.andero@sonyericsson.com>
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License version 2, as
>>> + * published by the Free Software Foundation.
>>> + */
>>> +
>>> +#include <linux/i2c.h>
>>> +#include <linux/irq.h>
>>> +#include <linux/slab.h>
>>> +#include <linux/input.h>
>>> +#include <linux/module.h>
>>> +#include <linux/interrupt.h>
>>> +#include <linux/gpio.h>
>>> +#include <linux/delay.h>
>>> +#include <linux/input/gp2ap002a00f.h>
>>> +
>>> +struct gp2a_data {
>>> +	struct input_dev *device;
>>> +	const struct gp2a_platform_data *pdata;
>>> +	struct i2c_client *i2c_client;
>>> +};
>>> +
>>> +enum gp2a_addr {
>>> +	GP2A_ADDR_PROX	= 0x0,
>>> +	GP2A_ADDR_GAIN	= 0x1,
>>> +	GP2A_ADDR_HYS	= 0x2,
>>> +	GP2A_ADDR_CYCLE	= 0x3,
>>> +	GP2A_ADDR_OPMOD	= 0x4,
>>> +	GP2A_ADDR_CON	= 0x6
>>> +};
>>> +
>>> +enum gp2a_controls {
>>> +	/* Software Shutdown control: 0 = shutdown, 1 = normal operation */
>>> +	GP2A_CTRL_SSD	= 0x01
>>> +};
>>> +
>>> +static int gp2a_enable(struct gp2a_data *dt)
>>> +{
>>> +	return i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_OPMOD,
>>> +					 GP2A_CTRL_SSD);
>>> +}
>>> +
>>> +static int gp2a_disable(struct gp2a_data *dt)
>>> +{
>>> +	return i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_OPMOD,
>>> +					 0x00);
>>> +}
>>> +
>>> +static int __devinit gp2a_initialize(struct gp2a_data *dt)
>>> +{
>>> +	int error;
>>> +
>>> +	error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_GAIN,
>>> +					  0x08);
>>> +	if (error < 0)
>>> +		return error;
>>> +
>>> +	error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_HYS,
>>> +					  0xc2);
>>> +	if (error < 0)
>>> +		return error;
>>> +
>>> +	error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_CYCLE,
>>> +					  0x04);
>>> +	if (error < 0)
>>> +		return error;
>>> +
>>> +	error = gp2a_disable(dt);
>>> +
>>> +	return error;
>>> +}
>>> +
>>> +static int gp2a_report(struct gp2a_data *dt)
>>> +{
>>> +	int vo = gpio_get_value(dt->pdata->vout_gpio);
>>> +
>>> +	input_report_switch(dt->device, SW_FRONT_PROXIMITY, !vo);
>>> +	input_sync(dt->device);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static irqreturn_t gp2a_irq(int irq, void *handle)
>>> +{
>>> +	struct gp2a_data *dt = handle;
>>> +
>>> +	gp2a_report(dt);
>>> +
>>> +	return IRQ_HANDLED;
>>> +}
>>> +
>>> +static int gp2a_device_open(struct input_dev *dev)
>>> +{
>>> +	struct gp2a_data *dt = input_get_drvdata(dev);
>>> +	int error;
>>> +
>>> +	error = gp2a_enable(dt);
>>> +	if (error < 0) {
>>> +		dev_err(&dev->dev, "unable to activate, err %d\n", error);
>>> +		return error;
>>> +	}
>>> +
>>> +	gp2a_report(dt);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static void gp2a_device_close(struct input_dev *dev)
>>> +{
>>> +	struct gp2a_data *dt = input_get_drvdata(dev);
>>> +	int error;
>>> +
>>> +	error = gp2a_disable(dt);
>>> +	if (error < 0)
>>> +		dev_err(&dev->dev, "unable to deactivate, err %d\n", error);
>>> +}
>>> +
>>> +static int __devinit gp2a_probe(struct i2c_client *client,
>>> +				const struct i2c_device_id *id)
>>> +{
>>> +	const struct gp2a_platform_data *pdata;
>>> +	struct gp2a_data *dt;
>>> +	int error;
>>> +
>>> +	pdata = client->dev.platform_data;
>>> +	if (!pdata)
>>> +		return -EINVAL;
>>> +
>>> +	if (pdata->hw_setup) {
>>> +		error = pdata->hw_setup(client);
>>> +		if (error < 0)
>>> +			return error;
>>> +	}
>>> +
>>> +	error = gpio_direction_input(pdata->vout_gpio);
>>> +	if (error < 0)
>>> +		goto err_hw_shutdown;
>>> +
>>> +	dt = kzalloc(sizeof(struct gp2a_data), GFP_KERNEL);
>>> +	if (!dt) {
>>> +		error = -ENOMEM;
>>> +		goto err_hw_shutdown;
>>> +	}
>>> +
>>> +	dt->pdata = pdata;
>>> +	dt->i2c_client = client;
>>> +	i2c_set_clientdata(client, dt);
>>> +
>>> +	error = gp2a_initialize(dt);
>>> +	if (error < 0)
>>> +		goto err_free_mem;
>>> +
>>> +	dt->device = input_allocate_device();
>>> +	if (!dt->device) {
>>> +		error = -ENOMEM;
>>> +		goto err_free_mem;
>>> +	}
>>> +	input_set_drvdata(dt->device, dt);
>>> +
>>> +	dt->device->open = gp2a_device_open;
>>> +	dt->device->close = gp2a_device_close;
>>> +	dt->device->name = GP2A_I2C_NAME;
>>> +	dt->device->id.bustype = BUS_I2C;
>>> +
>>> +	input_set_capability(dt->device, EV_SW, SW_FRONT_PROXIMITY);
>>> +
>>> +	error = request_threaded_irq(client->irq, NULL,
>>> +			gp2a_irq, IRQF_TRIGGER_RISING |
>>> +			IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
>>> +			GP2A_I2C_NAME, dt);
>>> +	if (error) {
>>> +		dev_err(&dt->device->dev, "irq request failed\n");
>>> +		goto err_free_input_dev;
>>> +	}
>>> +
>>> +	error = input_register_device(dt->device);
>>> +	if (error) {
>>> +		dev_err(&dt->device->dev, "device registration failed\n");
>>> +		goto err_free_irq;
>>> +	}
>>> +
>>> +	device_init_wakeup(&client->dev, pdata->wakeup);
>>> +
>>> +	return 0;
>>> +
>>> +err_free_irq:
>>> +	free_irq(client->irq, dt);
>>> +err_free_input_dev:
>>> +	input_free_device(dt->device);
>>> +err_free_mem:
>>> +	kfree(dt);
>>> +err_hw_shutdown:
>>> +	if (pdata->hw_shutdown)
>>> +		pdata->hw_shutdown(client);
>>> +	return error;
>>> +}
>>> +
>>> +static int __devexit gp2a_remove(struct i2c_client *client)
>>> +{
>>> +	struct gp2a_data *dt = i2c_get_clientdata(client);
>>> +
>>> +	device_init_wakeup(&client->dev, false);
>>> +
>>> +	free_irq(client->irq, dt);
>>> +	input_unregister_device(dt->device);
>>> +	if (dt->pdata->hw_shutdown)
>>> +		dt->pdata->hw_shutdown(client);
>>> +	kfree(dt);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +#ifdef CONFIG_PM_SLEEP
>>> +static int gp2a_suspend(struct device *dev)
>>> +{
>>> +	struct i2c_client *client = to_i2c_client(dev);
>>> +	struct gp2a_data *dt = i2c_get_clientdata(client);
>>> +	int error;
>>> +
>>> +	mutex_lock(&dt->device->mutex);
>>> +
>>> +	if (device_may_wakeup(&client->dev)) {
>>> +		enable_irq_wake(client->irq);
>>> +	} else if (dt->device->users) {
>>> +		error = gp2a_disable(dt);
>>> +		if (error < 0)
>>> +			return error;
>>> +	}
>>> +
>>> +	mutex_unlock(&dt->device->mutex);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int gp2a_resume(struct device *dev)
>>> +{
>>> +	struct i2c_client *client = to_i2c_client(dev);
>>> +	struct gp2a_data *dt = i2c_get_clientdata(client);
>>> +	int error;
>>> +
>>> +	mutex_lock(&dt->device->mutex);
>>> +
>>> +	if (device_may_wakeup(&client->dev)) {
>>> +		disable_irq_wake(client->irq);
>>> +	} else if (dt->device->users) {
>>> +		error = gp2a_enable(dt);
>>> +		if (error < 0)
>>> +			return error;
>>> +	}
>>> +
>>> +	mutex_unlock(&dt->device->mutex);
>>> +
>>> +	return 0;
>>> +}
>>> +#endif
>>> +
>>> +static SIMPLE_DEV_PM_OPS(gp2a_pm, gp2a_suspend, gp2a_resume);
>>> +
>>> +static const struct i2c_device_id gp2a_i2c_id[] = {
>>> +	{ GP2A_I2C_NAME, 0 },
>>> +	{ }
>>> +};
>>> +
>>> +static struct i2c_driver gp2a_i2c_driver = {
>>> +	.driver = {
>>> +		.name	= GP2A_I2C_NAME,
>>> +		.owner	= THIS_MODULE,
>>> +		.pm	= &gp2a_pm
>> This might give a compilation break 
>> fixing which feel free to add a
>> Reviewed-by: Datta Shubhrajyoti <shubhrajyoti@ti.com>
> Why would this cause compilation break? If you are thinking of when
> CONFIG_PM_SLEEP is not defined, please bare in mind that
> the SIMPLE_DEV_PM_OPS-macro will give you an empty gp2a_pm-struct and
> hence no build error.
>
yes  missed it .


>>> +	},
>>> +	.probe		= gp2a_probe,
>>> +	.remove		= __devexit_p(gp2a_remove),
>>> +	.id_table	= gp2a_i2c_id
>>> +};
>>> +
>>> +static int __init gp2a_init(void)
>>> +{
>>> +	return i2c_add_driver(&gp2a_i2c_driver);
>>> +}
>>> +
>>> +static void __exit gp2a_exit(void)
>>> +{
>>> +	i2c_del_driver(&gp2a_i2c_driver);
>>> +}
>>> +
>>> +module_init(gp2a_init);
>>> +module_exit(gp2a_exit);
>>> +
>>> +MODULE_AUTHOR("Courtney Cavin <courtney.cavin@sonyericsson.com>");
>>> +MODULE_DESCRIPTION("Sharp GP2AP002A00F I2C Proximity/Opto sensor driver");
>>> +MODULE_LICENSE("GPL v2");
>>> diff --git a/include/linux/input/gp2ap002a00f.h b/include/linux/input/gp2ap002a00f.h
>>> new file mode 100644
>>> index 0000000..aad2fd4
>>> --- /dev/null
>>> +++ b/include/linux/input/gp2ap002a00f.h
>>> @@ -0,0 +1,22 @@
>>> +#ifndef _GP2AP002A00F_H_
>>> +#define _GP2AP002A00F_H_
>>> +
>>> +#include <linux/i2c.h>
>>> +
>>> +#define GP2A_I2C_NAME "gp2ap002a00f"
>>> +
>>> +/**
>>> + * struct gp2a_platform_data - Sharp gp2ap002a00f proximity platform data
>>> + * @vout_gpio: The gpio connected to the object detected pin (VOUT)
>>> + * @wakeup: Set to true if the proximity can wake the device from suspend
>>> + * @hw_setup: Callback for setting up hardware such as gpios and vregs
>>> + * @hw_shutdown: Callback for properly shutting down hardware
>>> + */
>>> +struct gp2a_platform_data {
>>> +	int vout_gpio;
>>> +	bool wakeup;
>>> +	int (*hw_setup)(struct i2c_client *client);
>>> +	int (*hw_shutdown)(struct i2c_client *client);
>>> +};
>>> +
>>> +#endif
> -Oskar