From mboxrd@z Thu Jan  1 00:00:00 1970
From: Hui Wang <jason77.wang@gmail.com>
Subject: Re: [PATCH v4 3/3] ARM: dts: imx6q-sabrelite: add eeti egalax
Date: Fri, 17 Aug 2012 09:20:59 +0800
Message-ID: <502D9C7B.6070203@gmail.com>
References: <1345114051-3052-1-git-send-email-jason77.wang@gmail.com> <1345114051-3052-2-git-send-email-jason77.wang@gmail.com> <1345114051-3052-3-git-send-email-jason77.wang@gmail.com> <1345114051-3052-4-git-send-email-jason77.wang@gmail.com> <20120817003329.GC24242@S2101-09.ap.freescale.net>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed
Content-Transfer-Encoding: 7bit
Return-path: <linux-input-owner@vger.kernel.org>
Received: from mail.windriver.com ([147.11.1.11]:47865 "EHLO
	mail.windriver.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
	with ESMTP id S1755178Ab2HQBVv (ORCPT
	<rfc822;linux-input@vger.kernel.org>);
	Thu, 16 Aug 2012 21:21:51 -0400
In-Reply-To: <20120817003329.GC24242@S2101-09.ap.freescale.net>
Sender: linux-input-owner@vger.kernel.org
List-Id: linux-input@vger.kernel.org
To: Shawn Guo <shawn.guo@linaro.org>
Cc: Hui Wang <jason77.wang@gmail.com>, dmitry.torokhov@gmail.com, jiejing.zhang@freescale.com, linux-input@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree-discuss@lists.ozlabs.org

Shawn Guo wrote:
> On Thu, Aug 16, 2012 at 06:47:31PM +0800, Hui Wang wrote:
>   
>> i.MX6Q sabrelite board uses i2c3 to connect an eeti egalax
>> touchscreen controller, add it as an i2c slave device in the dts.
>>
>> Signed-off-by: Hui Wang <jason77.wang@gmail.com>
>>     
>
> Looks good.  Will apply it after the driver part gets accepted.
>
>   
Got it, thanks.

Regards,
Hui.