From: Nikolay Epifanov <nik.epifanov@gmail.com>
To: Joonyoung Shim <dofmind@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
"linux-input@vger.kernel.org" <linux-input@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] input: add MELFAS mms144 touchscreen driver
Date: Sat, 15 Dec 2012 10:29:07 +0400 [thread overview]
Message-ID: <50CC18B3.5070800@gmail.com> (raw)
In-Reply-To: <CAPLVkLtbz+mosPtgPJQtOpO+xmAxzrqYmJkLzDWdoc4dQYve5w@mail.gmail.com>
On 15.12.2012 05:46, Joonyoung Shim wrote:
> Hi,
>
> 2012년 12월 13일 목요일에 Nikolay Epifanov님이 작성:
>
> This is an initial driver for MELFAS touchscreen chip mms144.
>
> Signed-off-by: Nikolay Epifanov <nik.epifanov@gmail.com>
> ---
> I don't know whether single driver could be used for both mms114 and
> mms144.
> Couldn't find datasheets for any of them.
>
>
> The touch data process logic of this driver is almost same with it of
> mms114 driver and offset of many registers is also same. I think you can
> merge this to mms114 driver.
>
> Thanks.
>
>
> There are two firmwares available under redistribution license from
> AOSP tree:
> for FPCB revisions 3.2 and 3.1. Not sure if those are Melfas original
> or modified by Samsung. (Just for reference: they are
> mms144_ts_rev3*.fw at
> https://android.googlesource.com/device/samsung/tuna/+/214d003a47e7fe2962df667c5d65bce92a21a40e/
>
> mux_fw_flash(bool) from platform data switches pins between
> I2C<->GPIO modes.
>
> Driver has been tested on Samsung Galaxy Nexus except suspend/resume.
>
> Applied on
> git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git
> <http://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git>
> branch next.
>
> drivers/input/touchscreen/Kconfig | 14 +
> drivers/input/touchscreen/Makefile | 1 +
> drivers/input/touchscreen/mms144.c | 821
> ++++++++++++++++++++++++++++++++++++
> include/linux/i2c/mms144.h | 34 ++
> 4 files changed, 870 insertions(+)
>
> diff --git a/drivers/input/touchscreen/Kconfig
> b/drivers/input/touchscreen/Kconfig
> index b93b598..78d9cd3 100644
> --- a/drivers/input/touchscreen/Kconfig
> +++ b/drivers/input/touchscreen/Kconfig
> @@ -369,6 +369,20 @@ config TOUCHSCREEN_MMS114
> To compile this driver as a module, choose M here: the
> module will be called mms114.
>
> +config TOUCHSCREEN_MMS144
> + tristate "MELFAS MMS144 touchscreen"
> + depends on I2C
> + help
> + Say Y here if you have the MELFAS MMS144 touchscreen
> controller
> + chip in your system.
> + Such kind of chip can be found in Samsung Galaxy Nexus
> + touchscreens.
> +
> + If unsure, say N.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called mms144.
> +
> config TOUCHSCREEN_MTOUCH
> tristate "MicroTouch serial touchscreens"
> select SERIO
> diff --git a/drivers/input/touchscreen/Makefile
> b/drivers/input/touchscreen/Makefile
> index 5f949c0..cfbe87c 100644
> --- a/drivers/input/touchscreen/Makefile
> +++ b/drivers/input/touchscreen/Makefile
> @@ -39,6 +39,7 @@ obj-$(CONFIG_TOUCHSCREEN_MC13783) += mc13783_ts.o
> obj-$(CONFIG_TOUCHSCREEN_MCS5000) += mcs5000_ts.o
> obj-$(CONFIG_TOUCHSCREEN_MIGOR) += migor_ts.o
> obj-$(CONFIG_TOUCHSCREEN_MMS114) += mms114.o
> +obj-$(CONFIG_TOUCHSCREEN_MMS144) += mms144.o
> obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o
> obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o
> obj-$(CONFIG_TOUCHSCREEN_HP600) += hp680_ts_input.o
> diff --git a/drivers/input/touchscreen/mms144.c
> b/drivers/input/touchscreen/mms144.c
> new file mode 100644
> index 0000000..3bb84d0
> --- /dev/null
> +++ b/drivers/input/touchscreen/mms144.c
> @@ -0,0 +1,821 @@
> +/*
> + * mms144.c - Touchscreen driver for Melfas MMS144 touch controllers
> + *
> + * Copyright (C) 2011 Google Inc.
> + * Author: Dima Zavin <dima@android.com>
> + * Simon Wilson <simonwilson@google.com>
> + * Copyright (C) 2012 Nikolay Epifanov <nik.epifanov@gmail.com>
> + *
> + * ISP reflashing code based on original code from Melfas.
> + *
> + * This program is free software; you can redistribute it and/or
> modify it
> + * under the terms of the GNU General Public License as
> published by the
> + * Free Software Foundation; either version 2 of the License, or
> (at your
> + * option) any later version.
> + *
> + */
> +
> +#include <linux/completion.h>
> +#include <linux/delay.h>
> +#include <linux/firmware.h>
> +#include <linux/gpio.h>
> +#include <linux/i2c.h>
> +#include <linux/i2c/mms144.h>
> +#include <linux/init.h>
> +#include <linux/input.h>
> +#include <linux/input/mt.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/slab.h>
> +#include <linux/unaligned/le_struct.h>
> +
> +#define MAX_FINGERS 10
> +#define MAX_WIDTH 30
> +#define MAX_PRESSURE 255
> +#define FINGER_EVENT_SZ 6
> +
> +/* Registers */
> +#define MMS_MODE_CONTROL 0x01
> +#define MMS_XYRES_HI 0x02
> +#define MMS_XRES_LO 0x03
> +#define MMS_YRES_LO 0x04
> +
> +#define MMS_INPUT_EVENT_PKT_SZ 0x0F
> +#define MMS_INPUT_EVENT0 0x10
> +
> +#define MMS_TSP_REVISION 0xF0
> +#define MMS_HW_REVISION 0xF1
> +#define MMS_COMPAT_GROUP 0xF2
> +#define MMS_FW_VERSION 0xF3
>
>
> Above registers are same with them of mms114 driver.
Hi,
thanks, I'll give it a shot.
prev parent reply other threads:[~2012-12-15 6:29 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-13 12:00 [PATCH] input: add MELFAS mms144 touchscreen driver Nikolay Epifanov
[not found] ` <CAPLVkLtbz+mosPtgPJQtOpO+xmAxzrqYmJkLzDWdoc4dQYve5w@mail.gmail.com>
2012-12-15 6:29 ` Nikolay Epifanov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50CC18B3.5070800@gmail.com \
--to=nik.epifanov@gmail.com \
--cc=dmitry.torokhov@gmail.com \
--cc=dofmind@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).