linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: butmonkeh@gmail.com
To: jikos@kernel.org, bentiss@kernel.org,
	Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Cc: Mario.Limonciello@amd.com, linux-input@vger.kernel.org,
	Basavaraj Natikar <Basavaraj.Natikar@amd.com>,
	Eric Naim <dnaim@cachyos.org>,
	Akshata MukundShetty <akshata.mukundshetty@amd.com>
Subject: Re: [PATCH v2] HID: amd_sfh: Enable operating mode
Date: Thu, 07 Aug 2025 13:42:56 +0100	[thread overview]
Message-ID: <5275875.OV4Wx5bFTl@fedora> (raw)
In-Reply-To: <20250623085453.2267034-1-Basavaraj.Natikar@amd.com>

On Monday, 23 June 2025 09:54:53 British Summer Time Basavaraj Natikar wrote:
> Add changes to enable operating modes in the driver to allow the FW to
> activate and retrieve data from relevant sensors. This enables the FW to
> take necessary actions based on the operating modes.
> 
> Tested-by: Eric Naim <dnaim@cachyos.org>
> Co-developed-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
> Signed-off-by: Akshata MukundShetty <akshata.mukundshetty@amd.com>
> Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
> ---
> v2:
> * Increased missing device count.
> ---
>  drivers/hid/amd-sfh-hid/amd_sfh_client.c | 23 +++++++++++++++++++++++
>  drivers/hid/amd-sfh-hid/amd_sfh_hid.h    |  2 +-
>  drivers/hid/amd-sfh-hid/amd_sfh_pcie.c   |  4 ++++
>  drivers/hid/amd-sfh-hid/amd_sfh_pcie.h   |  1 +
>  4 files changed, 29 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_client.c
> b/drivers/hid/amd-sfh-hid/amd_sfh_client.c index 3438d392920f..0f2cbae39b2b
> 100644
> --- a/drivers/hid/amd-sfh-hid/amd_sfh_client.c
> +++ b/drivers/hid/amd-sfh-hid/amd_sfh_client.c
> @@ -146,6 +146,8 @@ static const char *get_sensor_name(int idx)
>  		return "gyroscope";
>  	case mag_idx:
>  		return "magnetometer";
> +	case op_idx:
> +		return "operating-mode";
>  	case als_idx:
>  	case ACS_IDX: /* ambient color sensor */
>  		return "ALS";
> @@ -243,6 +245,20 @@ int amd_sfh_hid_client_init(struct amd_mp2_dev
> *privdata) rc = -ENOMEM;
>  			goto cleanup;
>  		}
> +
> +		if (cl_data->sensor_idx[i] == op_idx) {
> +			info.period = AMD_SFH_IDLE_LOOP;
> +			info.sensor_idx = cl_data->sensor_idx[i];
> +			info.dma_address = cl_data->sensor_dma_addr[i];
> +			mp2_ops->start(privdata, info);
> +			cl_data->sensor_sts[i] = 
amd_sfh_wait_for_response(privdata,
> +								
	   cl_data->sensor_idx[i],
> +								
	   SENSOR_ENABLED);
> +			if (cl_data->sensor_sts[i] == SENSOR_ENABLED)
> +				cl_data->is_any_sensor_enabled = true;
> +			continue;
> +		}
> +
>  		cl_data->sensor_sts[i] = SENSOR_DISABLED;
>  		cl_data->sensor_requested_cnt[i] = 0;
>  		cl_data->cur_hid_dev = i;
> @@ -303,6 +319,13 @@ int amd_sfh_hid_client_init(struct amd_mp2_dev
> *privdata)
> 
>  	for (i = 0; i < cl_data->num_hid_devices; i++) {
>  		cl_data->cur_hid_dev = i;
> +		if (cl_data->sensor_idx[i] == op_idx) {
> +			dev_dbg(dev, "sid 0x%x (%s) status 0x%x\n",
> +				cl_data->sensor_idx[i], 
get_sensor_name(cl_data->sensor_idx[i]),
> +				cl_data->sensor_sts[i]);
> +			continue;
> +		}
> +
>  		if (cl_data->sensor_sts[i] == SENSOR_ENABLED) {
>  			rc = amdtp_hid_probe(i, cl_data);
>  			if (rc)
> diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_hid.h
> b/drivers/hid/amd-sfh-hid/amd_sfh_hid.h index 1c91be8daedd..7452b0302953
> 100644
> --- a/drivers/hid/amd-sfh-hid/amd_sfh_hid.h
> +++ b/drivers/hid/amd-sfh-hid/amd_sfh_hid.h
> @@ -11,7 +11,7 @@
>  #ifndef AMDSFH_HID_H
>  #define AMDSFH_HID_H
> 
> -#define MAX_HID_DEVICES		6
> +#define MAX_HID_DEVICES		7
>  #define AMD_SFH_HID_VENDOR	0x1022
>  #define AMD_SFH_HID_PRODUCT	0x0001
> 
> diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c
> b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c index 1c1fd63330c9..2983af969579
> 100644
> --- a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c
> +++ b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.c
> @@ -29,6 +29,7 @@
>  #define ACEL_EN		BIT(0)
>  #define GYRO_EN		BIT(1)
>  #define MAGNO_EN	BIT(2)
> +#define OP_EN		BIT(15)
>  #define HPD_EN		BIT(16)
>  #define ALS_EN		BIT(19)
>  #define ACS_EN		BIT(22)
> @@ -232,6 +233,9 @@ int amd_mp2_get_sensor_num(struct amd_mp2_dev *privdata,
> u8 *sensor_id) if (MAGNO_EN & activestatus)
>  		sensor_id[num_of_sensors++] = mag_idx;
> 
> +	if (OP_EN & activestatus)
> +		sensor_id[num_of_sensors++] = op_idx;
> +
>  	if (ALS_EN & activestatus)
>  		sensor_id[num_of_sensors++] = als_idx;
> 
> diff --git a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h
> b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h index 05e400a4a83e..2eb61f4e8434
> 100644
> --- a/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h
> +++ b/drivers/hid/amd-sfh-hid/amd_sfh_pcie.h
> @@ -79,6 +79,7 @@ enum sensor_idx {
>  	accel_idx = 0,
>  	gyro_idx = 1,
>  	mag_idx = 2,
> +	op_idx = 15,
>  	als_idx = 19
>  };

Tested-by: Marc H (butmonkeh@gmail.com) Asus ROG Flow X13 (GV301) - working



      parent reply	other threads:[~2025-08-07 12:43 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-23  8:54 [PATCH v2] HID: amd_sfh: Enable operating mode Basavaraj Natikar
2025-06-23 14:59 ` Limonciello, Mario
2025-07-03  7:36 ` Jiri Kosina
2025-08-07 12:42 ` butmonkeh [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5275875.OV4Wx5bFTl@fedora \
    --to=butmonkeh@gmail.com \
    --cc=Basavaraj.Natikar@amd.com \
    --cc=Mario.Limonciello@amd.com \
    --cc=akshata.mukundshetty@amd.com \
    --cc=bentiss@kernel.org \
    --cc=dnaim@cachyos.org \
    --cc=jikos@kernel.org \
    --cc=linux-input@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).