From: Beomho Seo <beomho.seo@samsung.com>
To: linux-input@vger.kernel.org, devicetree@vger.kernel.org,
dmitry.torokhov@gmail.com,
Joonyoung Shim <jy0922.shim@samsung.com>,
mark.rutland@arm.com
Cc: Myungjoo Ham <myungjoo.ham@samsung.com>,
Jaehoon Chung <jh80.chung@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>
Subject: [PATCH 1/2] Input: mcs_touchkey: add device tree support
Date: Wed, 21 May 2014 14:51:49 +0900 [thread overview]
Message-ID: <537C3EF5.90000@samsung.com> (raw)
Add device tree support for mcs touchkey driver.
Tested on exynos 4412 board.
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
---
drivers/input/keyboard/mcs_touchkey.c | 73 +++++++++++++++++++++++++++++++--
1 file changed, 69 insertions(+), 4 deletions(-)
diff --git a/drivers/input/keyboard/mcs_touchkey.c b/drivers/input/keyboard/mcs_touchkey.c
index 1da8e0b..9bff47b 100644
--- a/drivers/input/keyboard/mcs_touchkey.c
+++ b/drivers/input/keyboard/mcs_touchkey.c
@@ -19,6 +19,7 @@
#include <linux/irq.h>
#include <linux/slab.h>
#include <linux/pm.h>
+#include <linux/of_gpio.h>
/* MCS5000 Touchkey */
#define MCS5000_TOUCHKEY_STATUS 0x04
@@ -96,6 +97,60 @@ static irqreturn_t mcs_touchkey_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
+#ifdef CONFIG_OF
+static struct mcs_platform_data *mcs_touchkey_parse_dt(struct device *dev)
+{
+ struct mcs_platform_data *pdata;
+ struct device_node *np = dev->of_node;
+ unsigned int keymap[2];
+ unsigned int len;
+ int i = 0;
+ const __be32 *prop;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(dev, "Failed to allocate platform data\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ prop = of_get_property(np, "linux,code", &len);
+ if (!prop) {
+ dev_err(dev, "Failed to get code\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (len % sizeof(u32)) {
+ dev_err(dev, "Malformed keycode property\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ pdata->keymap_size = len / sizeof(u32);
+
+ if (of_property_read_u32(np, "key_maxval", &pdata->key_maxval)) {
+ dev_err(dev, "Failed to get key max value data\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (pdata->keymap_size > pdata->key_maxval) {
+ dev_err(dev, "Key map size overflow\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ for (i = 0; i < pdata->keymap_size; i++) {
+ u32 code = be32_to_cpup(prop + i);
+ keymap[i] = MCS_KEY_MAP(i, code);
+ }
+ pdata->keymap = keymap;
+ return pdata;
+}
+#else
+static inline struct mcs_platform_data *mcs_touchkey_parse_dt
+ (struct device *dev)
+{
+ return NULL;
+}
+#endif
+
static int mcs_touchkey_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -107,10 +162,14 @@ static int mcs_touchkey_probe(struct i2c_client *client,
int error;
int i;
- pdata = dev_get_platdata(&client->dev);
- if (!pdata) {
- dev_err(&client->dev, "no platform data defined\n");
- return -EINVAL;
+ if (&client->dev.of_node)
+ pdata = mcs_touchkey_parse_dt(&client->dev);
+ else
+ pdata = dev_get_platdata(&client->dev);
+
+ if (IS_ERR(pdata)) {
+ dev_err(&client->dev, "Failed to get platform data\n");
+ return PTR_ERR(pdata);
}
data = kzalloc(sizeof(struct mcs_touchkey_data) +
@@ -262,11 +321,17 @@ static const struct i2c_device_id mcs_touchkey_id[] = {
};
MODULE_DEVICE_TABLE(i2c, mcs_touchkey_id);
+static struct of_device_id mcs_touchkey_dt_match[] = {
+ { .compatible = "mcs5000_touchkey", },
+ { .compatible = "mcs5080_touchkey", },
+};
+
static struct i2c_driver mcs_touchkey_driver = {
.driver = {
.name = "mcs_touchkey",
.owner = THIS_MODULE,
.pm = &mcs_touchkey_pm_ops,
+ .of_match_table = of_match_ptr(mcs_touchkey_dt_match),
},
.probe = mcs_touchkey_probe,
.remove = mcs_touchkey_remove,
--
1.7.9.5
next reply other threads:[~2014-05-21 5:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-21 5:51 Beomho Seo [this message]
2014-05-21 13:48 ` [PATCH 1/2] Input: mcs_touchkey: add device tree support Mark Rutland
2014-05-22 2:27 ` Beomho Seo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=537C3EF5.90000@samsung.com \
--to=beomho.seo@samsung.com \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=jh80.chung@samsung.com \
--cc=jy0922.shim@samsung.com \
--cc=linux-input@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=myungjoo.ham@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).