From: Jonathan Cameron <jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
To: Reyad Attiyat
<reyad.attiyat-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-input <linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
Srinivas Pandruvada
<srinivas.pandruvada-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
Jiri Kosina <jkosina-AlSwsSmVLrQ@public.gmane.org>
Subject: Re: [PATCH] HID: Debug: Add labels for HID Sensor Usages
Date: Sat, 24 May 2014 11:25:27 +0100 [thread overview]
Message-ID: <53807397.9080807@kernel.org> (raw)
In-Reply-To: <CA+BWVUTOHr-sktWtpGL7-1wTdz2suDWFjcyX=fFU+JHjs5+TTQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
On 14/05/14 01:54, Reyad Attiyat wrote:
> ---
This looks reasonable to me, but I haven't checked every entry. Also Reyad, you
need to sign off on the patch if you expect anyone to pick it up.
Jiri, this is one for you. (note Jiri should probably have been cc'd in the
first place as the HID maintainer - unless he specifically asked not to be).
Jonathan
> drivers/hid/hid-debug.c | 79 +++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 79 insertions(+)
>
> diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
> index 53b771d..25cc71c 100644
> --- a/drivers/hid/hid-debug.c
> +++ b/drivers/hid/hid-debug.c
> @@ -272,6 +272,85 @@ static const struct hid_usage_entry hid_usage_table[] = {
> {0, 0xAA, "Shared_Parameter_Blocks"},
> {0, 0xAB, "Create_New_Effect_Report"},
> {0, 0xAC, "RAM_Pool_Available"},
> + { 0x20, 0, "Sensor" },
> + { 0x20, 0x01, "Sensor" },
> + { 0x20, 0x10, "Biometric" },
> + { 0x20, 0x11, "BiometricHumanPresence" },
> + { 0x20, 0x12, "BiometricHumanProximity" },
> + { 0x20, 0x13, "BiometricHumanTouch" },
> + { 0x20, 0x20, "Electrical" },
> + { 0x20, 0x21, "ElectricalCapacitance" },
> + { 0x20, 0x22, "ElectricalCurrent" },
> + { 0x20, 0x23, "ElectricalPower" },
> + { 0x20, 0x24, "ElectricalInductance" },
> + { 0x20, 0x25, "ElectricalResistance" },
> + { 0x20, 0x26, "ElectricalVoltage" },
> + { 0x20, 0x27, "ElectricalPoteniometer" },
> + { 0x20, 0x28, "ElectricalFrequency" },
> + { 0x20, 0x29, "ElectricalPeriod" },
> + { 0x20, 0x30, "Environmental" },
> + { 0x20, 0x31, "EnvironmentalAtmosphericPressure" },
> + { 0x20, 0x32, "EnvironmentalHumidity" },
> + { 0x20, 0x33, "EnvironmentalTemperature" },
> + { 0x20, 0x34, "EnvironmentalWindDirection" },
> + { 0x20, 0x35, "EnvironmentalWindSpeed" },
> + { 0x20, 0x40, "Light" },
> + { 0x20, 0x41, "LightAmbientLight" },
> + { 0x20, 0x42, "LightConsumerInfrared" },
> + { 0x20, 0x50, "Location" },
> + { 0x20, 0x51, "LocationBroadcast" },
> + { 0x20, 0x52, "LocationDeadReckoning" },
> + { 0x20, 0x53, "LocationGPS" },
> + { 0x20, 0x54, "LocationLookup" },
> + { 0x20, 0x55, "LocationOther" },
> + { 0x20, 0x56, "LocationStatic" },
> + { 0x20, 0x57, "LocationTriangulation" },
> + { 0x20, 0x60, "Mechanical" },
> + { 0x20, 0x61, "MechanicalBooleanSwitch" },
> + { 0x20, 0x62, "MechanicalBooleanSwitchArray" },
> + { 0x20, 0x63, "MechanicalMultivalueSwitch" },
> + { 0x20, 0x64, "MechanicalForce" },
> + { 0x20, 0x65, "MechanicalPressure" },
> + { 0x20, 0x66, "MechanicalStrain" },
> + { 0x20, 0x67, "MechanicalWeight" },
> + { 0x20, 0x68, "MechanicalHapticVibrator" },
> + { 0x20, 0x69, "MechanicalHallEffectSwitch" },
> + { 0x20, 0x70, "Motion" },
> + { 0x20, 0x71, "MotionAccelerometer1D" },
> + { 0x20, 0x72, "MotionAccelerometer2D" },
> + { 0x20, 0x73, "MotionAccelerometer3D" },
> + { 0x20, 0x74, "MotionGyrometer1D" },
> + { 0x20, 0x75, "MotionGyrometer2D" },
> + { 0x20, 0x76, "MotionGyrometer3D" },
> + { 0x20, 0x77, "MotionMotionDetector" },
> + { 0x20, 0x78, "MotionSpeedometer" },
> + { 0x20, 0x79, "MotionAccelerometer" },
> + { 0x20, 0x7A, "MotionGyrometer" },
> + { 0x20, 0x80, "Orientation" },
> + { 0x20, 0x81, "OrientationCompass1D" },
> + { 0x20, 0x82, "OrientationCompass2D" },
> + { 0x20, 0x83, "OrientationCompass3D" },
> + { 0x20, 0x84, "OrientationInclinometer1D" },
> + { 0x20, 0x85, "OrientationInclinometer2D" },
> + { 0x20, 0x86, "OrientationInclinometer3D" },
> + { 0x20, 0x87, "OrientationDistance1D" },
> + { 0x20, 0x88, "OrientationDistance2D" },
> + { 0x20, 0x89, "OrientationDistance3D" },
> + { 0x20, 0x8A, "OrientationDeviceOrientation" },
> + { 0x20, 0x8B, "OrientationCompass" },
> + { 0x20, 0x8C, "OrientationInclinometer" },
> + { 0x20, 0x8D, "OrientationDistance" },
> + { 0x20, 0x90, "Scanner" },
> + { 0x20, 0x91, "ScannerBarcode" },
> + { 0x20, 0x91, "ScannerRFID" },
> + { 0x20, 0x91, "ScannerNFC" },
> + { 0x20, 0xA0, "Time" },
> + { 0x20, 0xA1, "TimeAlarmTimer" },
> + { 0x20, 0xA2, "TimeRealTimeClock" },
> + { 0x20, 0xE0, "Other" },
> + { 0x20, 0xE1, "OtherCustom" },
> + { 0x20, 0xE2, "OtherGeneric" },
> + { 0x20, 0xE3, "OtherGenericEnumerator" },
> { 0x84, 0, "Power Device" },
> { 0x84, 0x02, "PresentStatus" },
> { 0x84, 0x03, "ChangeStatus" },
>
next prev parent reply other threads:[~2014-05-24 10:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-14 0:54 [PATCH] HID: Debug: Add labels for HID Sensor Usages Reyad Attiyat
[not found] ` <CA+BWVUTOHr-sktWtpGL7-1wTdz2suDWFjcyX=fFU+JHjs5+TTQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-05-24 10:25 ` Jonathan Cameron [this message]
2014-05-26 8:37 ` Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53807397.9080807@kernel.org \
--to=jic23-dgejt+ai2ygdnm+yrofe0a@public.gmane.org \
--cc=jkosina-AlSwsSmVLrQ@public.gmane.org \
--cc=linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=reyad.attiyat-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=srinivas.pandruvada-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).