From: Florian Echtler <floe@butterbrot.org>
To: linux-input@vger.kernel.org
Subject: Inactive keyboard on Acer Aspire Switch 11
Date: Fri, 27 Feb 2015 00:18:39 +0100 [thread overview]
Message-ID: <54EFA9CF.6000100@butterbrot.org> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 2009 bytes --]
Hello everyone,
I've recently bought an Acer Aspire Switch 11 convertible
tablet/notebook hybrid device. Ubuntu 14.04.2 with kernel 3.16 runs
almost perfectly, with one notable exception: on the keyboard dock, only
the touchpad works, not the keyboard itself. I've done a bit of digging
in the logs, and found the following error messages relating to HID:
[ 8.790574] hidraw: raw HID events driver (C) Jiri Kosina
[ 8.796341] hid (null): usage index exceeded
[ 8.845668] usbcore: registered new interface driver usbhid
[ 8.845671] usbhid: USB HID core driver
[ 19.593717] hid-multitouch 0003:06CB:2991.0002:
input,hiddev0,hidraw0: USB HID v1.10 Mouse [ITE Tech. Inc. ITE
Device(8595)] on usb-0000:00:14.0-4.3/input1
[ 19.594268] hid-rmi 0003:06CB:2991.0001: usage index exceeded
[ 19.594274] hid-rmi 0003:06CB:2991.0001: item 0 2 2 2 parsing failed
[ 19.594288] hid-rmi 0003:06CB:2991.0001: parse failed
[ 19.594301] hid-rmi: probe of 0003:06CB:2991.0001 failed with error -22
[ 19.609228] hid-multitouch 0018:06CB:77B2.0004: input,hidraw1:
<UNKNOWN> HID v1.00 Mouse [SYNA7508:00 06CB:77B2] on
[ 19.924619] i2c_hid i2c-ITE8380:00: error in i2c_hid_init_report
size:19 / ret_size:18
The device in question has two endpoints:
T: Bus=02 Lev=02 Prnt=04 Port=02 Cnt=01 Dev#= 7 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=06cb ProdID=2991 Rev=00.06
S: Manufacturer=ITE Tech. Inc.
S: Product=ITE Device(8595)
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
I: If#= 1 Alt= 0 #EPs= 2 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
According to lsusb, the second one is a mouse (= touchpad), while the
first one is a keyboard (see attached lsusb.txt). Judging from the
dmesg, this is also the one which fails to initialize. Can anyone
suggest any quirks/fixes to try here?
Thanks & best regards, Florian
--
SENT FROM MY DEC VT50 TERMINAL
[-- Attachment #1.2: lsusb.txt --]
[-- Type: text/plain, Size: 3507 bytes --]
Bus 002 Device 007: ID 06cb:2991 Synaptics, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x06cb Synaptics, Inc.
idProduct 0x2991
bcdDevice 0.06
iManufacturer 1 ITE Tech. Inc.
iProduct 2 ITE Device(8595)
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 66
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 188
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 4
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 1 ITE Tech. Inc.
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 379
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Device Status: 0x0001
Self Powered
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
next reply other threads:[~2015-02-26 23:18 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-26 23:18 Florian Echtler [this message]
2015-02-27 0:46 ` Inactive keyboard on Acer Aspire Switch 11 Benjamin Tissoires
2015-02-27 11:25 ` Florian Echtler
2015-02-27 13:58 ` Benjamin Tissoires
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54EFA9CF.6000100@butterbrot.org \
--to=floe@butterbrot.org \
--cc=linux-input@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).