linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: "David Zafra Gómez" <dezeta@klo.es>,
	"Benjamin Tissoires" <benjamin.tissoires@gmail.com>
Cc: linux-input <linux-input@vger.kernel.org>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Duson Lin <dusonlin@emc.com.tw>, Jiri Kosina <jkosina@suse.cz>
Subject: Re: PROBLEM: Touchpad works just like a mouse
Date: Mon, 18 May 2015 12:19:01 +0200	[thread overview]
Message-ID: <5559BC95.1010304@redhat.com> (raw)
In-Reply-To: <554A77AE.5030801@klo.es>

Hi,

On 06-05-15 22:21, David Zafra Gómez wrote:
> Hi Hans
>
> Sorry for the delay.
>
> I'm afraid I haven't built a kernel before, so I need some help.
>
> I've found this link I think describes what I have to do
> https://www.kernel.org/doc/Documentation/applying-patches.txt
> I suppose it's right.
>
> I've installed kernel 4.0.0-040000rc6.201503291935. So I suppose I have to
> download sources for this kernel.
>
> Once downloaded, I have to change to the kernel source dir and run:
> $ patch -p1 < ../0001-elantech-Fix-detection-of-touchpads-where-the-revisi.patch
>
> Is all that right?

Yes that is correct.

> If yes, should I compile this patched kernel? How can I do it?

Usually your distro will have a wikipage with instructions on how to build
your own kernel, and it is best to follow your distros instructions.

If you're using Fedora I can build a test kernel for you to install.

Regards,

Hans


>
> Thanks in advance.
>
> David Zafra
>
> El 30/04/15 a las 10:38, Hans de Goede escribió:
>> Hi,
>>
>> On 30-04-15 07:34, David Zafra Gómez wrote:
>>> Hi everyone
>>>
>>> El 29/04/15 a las 09:35, Hans de Goede escribió:
>>>> Hi,
>>>>
>>>> On 28-04-15 23:26, David Zafra Gómez wrote:
>>>>> [    0.257439] pnp 00:06: Plug and Play ACPI device, IDs ETD0108
>>>>> SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
>>>>
>>>> Ok, so the "ETD0108" here means that you have an elantech ps/2 touchpad.
>>> Great! You got it.
>>>>
>>>> This also stands out in the log:
>>>>
>>>> > [    0.958323] i8042: [49] MUX error, status is 75, data is fe
>>>>
>>>> So the first thing to try is to boot with i8042.nomux=1 on the kernel
>>>> commandline.
>>> I have done it. The touchpad issue hasn't been solved. Do you want me to send
>>> dmesg output?
>>
>> I've taken another look at the traces you've posted before and I think that
>> I've found the problem. Can you build a kernel with the attached patch
>> and let us know if that fixes things ?
>>
>> Regards,
>>
>> Hans
>>
>>
>> -----
>> No se encontraron virus en este mensaje.
>> Comprobado por AVG -www.avg.com
>> Versión: 2015.0.5863 / Base de datos de virus: 4339/9659 - Fecha de publicación: 04/29/15
>
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2015-05-18 10:19 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <552C4E6C.4070102@klo.es>
2015-04-16  7:54 ` PROBLEM: Touchpad works just like a mouse David Zafra Gómez
2015-04-16 14:44   ` Benjamin Tissoires
2015-04-16 18:38     ` David Zafra Gómez
2015-04-18  7:01     ` David Zafra Gómez
2015-04-26 21:54       ` David Zafra Gómez
2015-04-27 18:25         ` Benjamin Tissoires
2015-04-28  6:55           ` Hans de Goede
     [not found]             ` <553FFB10.6010005@klo.es>
2015-04-29  7:35               ` Hans de Goede
2015-04-30  5:34                 ` David Zafra Gómez
2015-04-30  8:38                   ` Hans de Goede
     [not found]                     ` <554A77AE.5030801@klo.es>
2015-05-06 20:33                       ` David Zafra Gómez
2015-05-18 10:19                       ` Hans de Goede [this message]
2015-05-27 20:35                         ` David Zafra Gómez
2015-05-28  9:10                           ` Hans de Goede
2015-05-28 14:55                             ` David Zafra Gómez
2015-05-28 14:56                               ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5559BC95.1010304@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=benjamin.tissoires@gmail.com \
    --cc=dezeta@klo.es \
    --cc=dmitry.torokhov@gmail.com \
    --cc=dusonlin@emc.com.tw \
    --cc=jkosina@suse.cz \
    --cc=linux-input@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).