linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
To: dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	rydberg-FFUHeuDi6mxAfugRpC6u6w@public.gmane.org
Cc: mugunthanvnm-l0cyMroinI0@public.gmane.org,
	jg1.han-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org,
	linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v2] Input: pixcir_i2c_ts - Add RESET gpio
Date: Tue, 2 Jun 2015 12:33:34 +0300	[thread overview]
Message-ID: <556D786E.60003@ti.com> (raw)
In-Reply-To: <1423227190-10943-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>

The controller has a RESET pin which is usually controlled over
a GPIO line. If such a GPIO is provided, perform a RESET
during probe.

Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>
---
  .../bindings/input/touchscreen/pixcir_i2c_ts.txt   |  3 ++
  drivers/input/touchscreen/pixcir_i2c_ts.c          | 37 ++++++++++++++++++++--
  include/linux/input/pixcir_ts.h                    |  1 +
  3 files changed, 38 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
index 6e55109..8eb240a 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
@@ -8,6 +8,9 @@ Required properties:
  - touchscreen-size-x: horizontal resolution of touchscreen (in pixels)
  - touchscreen-size-y: vertical resolution of touchscreen (in pixels)
  
+Optional properties:
+- reset-gpio: GPIO connected to the RESET line of the chip
+
  Example:
  
  	i2c@00000000 {
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index 2c21071..80c956d 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -51,6 +51,19 @@ struct pixcir_report_data {
  	struct pixcir_touch touches[PIXCIR_MAX_SLOTS];
  };
  
+static void pixcir_reset(struct pixcir_i2c_ts_data *tsdata)
+{
+	const struct pixcir_ts_platform_data *pdata = tsdata->pdata;
+
+	if (gpio_is_valid(pdata->gpio_reset)) {
+		gpio_set_value(pdata->gpio_reset, 1);
+		ndelay(100);	/* datasheet section 1.2.3 says 80ns min. */
+		gpio_set_value(pdata->gpio_reset, 0);
+		/* wait for controller ready. 100ms guess. */
+		msleep(100);
+	}
+}
+
  static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata,
  			    struct pixcir_report_data *report)
  {
@@ -428,7 +441,8 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev)
  	pdata->chip = *(const struct pixcir_i2c_chip_data *)match->data;
  
  	pdata->gpio_attb = of_get_named_gpio(np, "attb-gpio", 0);
-	/* gpio_attb validity is checked in probe */
+	pdata->gpio_reset = of_get_named_gpio(np, "reset-gpio", 0);
+	/* gpio validity is checked in probe */
  
  	if (of_property_read_u32(np, "touchscreen-size-x", &pdata->x_max)) {
  		dev_err(dev, "Failed to get touchscreen-size-x property\n");
@@ -442,8 +456,9 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev)
  	}
  	pdata->y_max -= 1;
  
-	dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__,
-		pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb);
+	dev_dbg(dev, "%s: x %d, y %d, ATTB gpio %d, RESET gpio %d\n", __func__,
+		pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb,
+		pdata->gpio_reset);
  
  	return pdata;
  }
@@ -481,6 +496,10 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
  		return -EINVAL;
  	}
  
+	/* RESET gpio is optional */
+	if (!gpio_is_valid(pdata->gpio_reset))
+		dev_info(dev, "Invalid gpio_reset in pdata\n");
+
  	if (!pdata->chip.max_fingers) {
  		dev_err(dev, "Invalid max_fingers in pdata\n");
  		return -EINVAL;
@@ -530,6 +549,16 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
  
  	input_set_drvdata(input, tsdata);
  
+	if (gpio_is_valid(pdata->gpio_reset)) {
+		error = devm_gpio_request_one(dev, pdata->gpio_reset,
+					      GPIOF_OUT_INIT_LOW,
+					      "pixcir_i2c_reset");
+		if (error) {
+			dev_err(dev, "Failed to request RESET gpio\n");
+			return error;
+		}
+	}
+
  	error = devm_gpio_request_one(dev, pdata->gpio_attb,
  				      GPIOF_DIR_IN, "pixcir_i2c_attb");
  	if (error) {
@@ -545,6 +574,8 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client,
  		return error;
  	}
  
+	pixcir_reset(tsdata);
+
  	/* Always be in IDLE mode to save power, device supports auto wake */
  	error = pixcir_set_power_mode(tsdata, PIXCIR_POWER_IDLE);
  	if (error) {
diff --git a/include/linux/input/pixcir_ts.h b/include/linux/input/pixcir_ts.h
index 7bae83b..5b204dd 100644
--- a/include/linux/input/pixcir_ts.h
+++ b/include/linux/input/pixcir_ts.h
@@ -58,6 +58,7 @@ struct pixcir_ts_platform_data {
  	int x_max;
  	int y_max;
  	int gpio_attb;		/* GPIO connected to ATTB line */
+	int gpio_reset;		/* GPIO to RESET line. Set to -1 if unused */
  	struct pixcir_i2c_chip_data chip;
  };
  
-- 
2.1.4


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2015-06-02  9:33 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-06 12:53 [PATCH] Input: pixcir_i2c_ts - Add RESET gpio Roger Quadros
     [not found] ` <1423227190-10943-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2015-02-06 16:54   ` Dmitry Torokhov
2015-02-10  8:33     ` Roger Quadros
2015-06-02  9:33   ` Roger Quadros [this message]
2015-07-06 10:28     ` [PATCH v2] " Roger Quadros

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=556D786E.60003@ti.com \
    --to=rogerq-l0cymroini0@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=dmitry.torokhov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=jg1.han-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
    --cc=linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mugunthanvnm-l0cyMroinI0@public.gmane.org \
    --cc=rydberg-FFUHeuDi6mxAfugRpC6u6w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).