Re: [PATCH] input: Add keypad support for w90p910 evb

[Trilok Soni <soni.trilok@gmail.com>]

Hi Wan ZongShun,

On Thu, Jul 9, 2009 at 3:01 PM, Wan ZongShun<mcuos.com@gmail.com> wrote:
> Dear sirs,
>
> According to Trilok's suggestion, I fixed up my driver and
> resubmitted it.
>
> patch text:
>
> Add w90p910 keypad driver for w90p910 evalution board

s/evalution/evaluation ?

> based on w90p910,there is a 4X4 keypad on my board.
>
> Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>
>
> ---
>  drivers/input/keyboard/Kconfig          |   10 +
>  drivers/input/keyboard/Makefile         |    1 +
>  drivers/input/keyboard/w90p910_keypad.c |  306 +++++++++++++++++++++++++++++++
>  3 files changed, 317 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/input/keyboard/w90p910_keypad.c

Looks good to me. Thanks.

Reviewed-by: Trilok Soni <soni.trilok@gmail.com>


>
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index 9d8f796..aad2b05 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -353,4 +353,14 @@ config KEYBOARD_EP93XX
>          To compile this driver as a module, choose M here: the
>          module will be called ep93xx_keypad.
>
> +config KEYBOARD_W90P910
> +       tristate "W90P910 Matrix Keypad support"
> +       depends on ARCH_W90X900
> +       help
> +         Say Y here to enable the matrix keypad on evaluation board
> +         based on W90P910.
> +
> +         To compile this driver as a module, choose M here: the
> +         module will be called w90p910_keypad.
> +
>  endif
> diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
> index 156b647..d65086a 100644
> --- a/drivers/input/keyboard/Makefile
> +++ b/drivers/input/keyboard/Makefile
> @@ -30,3 +30,4 @@ obj-$(CONFIG_KEYBOARD_MAPLE)          += maple_keyb.o
>  obj-$(CONFIG_KEYBOARD_BFIN)            += bf54x-keys.o
>  obj-$(CONFIG_KEYBOARD_SH_KEYSC)                += sh_keysc.o
>  obj-$(CONFIG_KEYBOARD_EP93XX)          += ep93xx_keypad.o
> +obj-$(CONFIG_KEYBOARD_W90P910)         += w90p910_keypad.o
> diff --git a/drivers/input/keyboard/w90p910_keypad.c b/drivers/input/keyboard/w90p910_keypad.c
> new file mode 100644
> index 0000000..cfa6ab4
> --- /dev/null
> +++ b/drivers/input/keyboard/w90p910_keypad.c
> @@ -0,0 +1,306 @@
> +/*
> + * Copyright (c) 2008-2009 Nuvoton technology corporation.
> + *
> + * Wan ZongShun <mcuos.com@gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation;version 2 of the License.
> + *
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/input.h>
> +#include <linux/device.h>
> +#include <linux/platform_device.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +
> +#include <mach/w90p910_keypad.h>
> +
> +/* Keypad Interface Control Registers */
> +#define KPI_CONF               0x00
> +#define KPI_3KCONF             0x04
> +#define KPI_LPCONF             0x08
> +#define KPI_STATUS             0x0C
> +
> +#define IS1KEY                 (0x01 << 16)
> +#define INTTR                  (0x01 << 21)
> +#define KEY0R                  (0x0f << 3)
> +#define KEY0C                  0x07
> +#define DEBOUNCE_BIT           0x08
> +#define KSIZE0                 (0x01 << 16)
> +#define KSIZE1                 (0x01 << 17)
> +#define KPSEL                  (0x01 << 19)
> +#define ENKP                   (0x01 << 18)
> +
> +#define KGET_RAW(n)            (((n) & KEY0R) >> 3)
> +#define KGET_COLUMN(n)         ((n) & KEY0C)
> +
> +#define keypad_readl(off)      __raw_readl(keypad->mmio_base + (off))
> +#define keypad_writel(off, v)  __raw_writel((v), keypad->mmio_base + (off))
> +
> +#define MAX_MATRIX_KEY_NUM     (8 * 8)
> +
> +struct w90p910_keypad {
> +       struct w90p910_keypad_platform_data *pdata;
> +       struct clk *clk;
> +       struct input_dev *input_dev;
> +       void __iomem *mmio_base;
> +       int irq;
> +       unsigned int matrix_keycodes[MAX_MATRIX_KEY_NUM];
> +};
> +
> +static void w90p910_keypad_build_keycode(struct w90p910_keypad *keypad)
> +{
> +       struct w90p910_keypad_platform_data *pdata = keypad->pdata;
> +       struct input_dev *input_dev = keypad->input_dev;
> +       unsigned int *key;
> +       int i;
> +
> +       key = &pdata->matrix_key_map[0];
> +       for (i = 0; i < pdata->matrix_key_map_size; i++, key++) {
> +               int row = ((*key) >> 28) & 0xf;
> +               int col = ((*key) >> 24) & 0xf;
> +               int code = (*key) & 0xffffff;
> +
> +               keypad->matrix_keycodes[(row << 3) + col] = code;
> +               __set_bit(code, input_dev->keybit);
> +       }
> +
> +}
> +
> +static inline unsigned int lookup_matrix_keycode(
> +               struct w90p910_keypad *keypad, int row, int col)
> +{
> +       return keypad->matrix_keycodes[(row << 3) + col];
> +}
> +
> +static void w90p910_keypad_scan_matrix(struct w90p910_keypad *keypad,
> +                                                       unsigned int status)
> +{
> +       unsigned int row, col, val;
> +
> +       row = KGET_RAW(status);
> +       col = KGET_COLUMN(status);
> +
> +       val = lookup_matrix_keycode(keypad, row, col);
> +
> +       input_report_key(keypad->input_dev, val, 1);
> +
> +       input_sync(keypad->input_dev);
> +
> +       input_report_key(keypad->input_dev, val, 0);
> +
> +       input_sync(keypad->input_dev);
> +}
> +
> +static irqreturn_t w90p910_keypad_irq_handler(int irq, void *dev_id)
> +{
> +       struct w90p910_keypad *keypad = dev_id;
> +       unsigned int  kstatus, val;
> +
> +        kstatus = keypad_readl(KPI_STATUS);
> +
> +       val = INTTR | IS1KEY;
> +
> +       if (kstatus & val)
> +               w90p910_keypad_scan_matrix(keypad, kstatus);
> +
> +       return IRQ_HANDLED;
> +}
> +
> +static int w90p910_keypad_open(struct input_dev *dev)
> +{
> +       struct w90p910_keypad *keypad = input_get_drvdata(dev);
> +       struct w90p910_keypad_platform_data *pdata = keypad->pdata;
> +       unsigned int val, config;
> +
> +       /* Enable unit clock */
> +       clk_enable(keypad->clk);
> +
> +       val = keypad_readl(KPI_CONF);
> +       val |= (KPSEL | ENKP);
> +       val &= ~(KSIZE0 | KSIZE1);
> +
> +       config = pdata->prescale | (pdata->debounce << DEBOUNCE_BIT);
> +
> +       val |= config;
> +
> +       keypad_writel(KPI_CONF, val);
> +
> +       return 0;
> +}
> +
> +static void w90p910_keypad_close(struct input_dev *dev)
> +{
> +       struct w90p910_keypad *keypad = input_get_drvdata(dev);
> +
> +       /* Disable clock unit */
> +       clk_disable(keypad->clk);
> +}
> +
> +static int __devinit w90p910_keypad_probe(struct platform_device *pdev)
> +{
> +       struct w90p910_keypad *keypad;
> +       struct input_dev *input_dev;
> +       struct resource *res;
> +       int irq, error;
> +
> +       keypad = kzalloc(sizeof(struct w90p910_keypad), GFP_KERNEL);
> +       if (keypad == NULL) {
> +               dev_err(&pdev->dev, "failed to allocate driver data\n");
> +               return -ENOMEM;
> +       }
> +
> +       keypad->pdata = pdev->dev.platform_data;
> +       if (keypad->pdata == NULL) {
> +               dev_err(&pdev->dev, "no platform data defined\n");
> +               error = -EINVAL;
> +               goto failed_free;
> +       }
> +
> +       irq = platform_get_irq(pdev, 0);
> +       if (irq < 0) {
> +               dev_err(&pdev->dev, "failed to get keypad irq\n");
> +               error = -ENXIO;
> +               goto failed_free;
> +       }
> +
> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       if (res == NULL) {
> +               dev_err(&pdev->dev, "failed to get I/O memory\n");
> +               error = -ENXIO;
> +               goto failed_free;
> +       }
> +
> +       res = request_mem_region(res->start, resource_size(res), pdev->name);
> +       if (res == NULL) {
> +               dev_err(&pdev->dev, "failed to request I/O memory\n");
> +               error = -EBUSY;
> +               goto failed_free;
> +       }
> +
> +       keypad->mmio_base = ioremap(res->start, resource_size(res));
> +       if (keypad->mmio_base == NULL) {
> +               dev_err(&pdev->dev, "failed to remap I/O memory\n");
> +               error = -ENXIO;
> +               goto failed_free_mem;
> +       }
> +
> +       keypad->clk = clk_get(&pdev->dev, NULL);
> +       if (IS_ERR(keypad->clk)) {
> +               dev_err(&pdev->dev, "failed to get keypad clock\n");
> +               error = PTR_ERR(keypad->clk);
> +               goto failed_free_io;
> +       }
> +
> +       /* Create and register the input driver. */
> +       input_dev = input_allocate_device();
> +       if (!input_dev) {
> +               dev_err(&pdev->dev, "failed to allocate input device\n");
> +               error = -ENOMEM;
> +               goto failed_put_clk;
> +       }
> +
> +       /* set multi-function pin for w90p910 kpi. */
> +       mfp_set_groupi(&pdev->dev);
> +
> +       input_dev->name = pdev->name;
> +       input_dev->id.bustype = BUS_HOST;
> +       input_dev->open = w90p910_keypad_open;
> +       input_dev->close = w90p910_keypad_close;
> +       input_dev->dev.parent = &pdev->dev;
> +
> +       keypad->input_dev = input_dev;
> +       input_set_drvdata(input_dev, keypad);
> +
> +       input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
> +       w90p910_keypad_build_keycode(keypad);
> +       platform_set_drvdata(pdev, keypad);
> +
> +       error = request_irq(irq, w90p910_keypad_irq_handler, IRQF_DISABLED,
> +                           pdev->name, keypad);
> +       if (error) {
> +               dev_err(&pdev->dev, "failed to request IRQ\n");
> +               goto failed_free_dev;
> +       }
> +
> +       keypad->irq = irq;
> +
> +       /* Register the input device */
> +       error = input_register_device(input_dev);
> +       if (error) {
> +               dev_err(&pdev->dev, "failed to register input device\n");
> +               goto failed_free_irq;
> +       }
> +
> +       return 0;
> +
> +failed_free_irq:
> +       free_irq(irq, pdev);
> +       platform_set_drvdata(pdev, NULL);
> +failed_free_dev:
> +       input_free_device(input_dev);
> +failed_put_clk:
> +       clk_put(keypad->clk);
> +failed_free_io:
> +       iounmap(keypad->mmio_base);
> +failed_free_mem:
> +       release_mem_region(res->start, resource_size(res));
> +failed_free:
> +       kfree(keypad);
> +       return error;
> +}
> +
> +static int __devexit w90p910_keypad_remove(struct platform_device *pdev)
> +{
> +       struct w90p910_keypad *keypad = platform_get_drvdata(pdev);
> +       struct resource *res;
> +
> +       free_irq(keypad->irq, pdev);
> +
> +       clk_put(keypad->clk);
> +
> +       input_unregister_device(keypad->input_dev);
> +
> +       iounmap(keypad->mmio_base);
> +
> +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +       release_mem_region(res->start, resource_size(res));
> +
> +       platform_set_drvdata(pdev, NULL);
> +       kfree(keypad);
> +       return 0;
> +}
> +
> +static struct platform_driver w90p910_keypad_driver = {
> +       .probe          = w90p910_keypad_probe,
> +       .remove         = __devexit_p(w90p910_keypad_remove),
> +       .driver         = {
> +               .name   = "w90p910-keypad",
> +               .owner  = THIS_MODULE,
> +       },
> +};
> +
> +static int __init w90p910_keypad_init(void)
> +{
> +       return platform_driver_register(&w90p910_keypad_driver);
> +}
> +
> +static void __exit w90p910_keypad_exit(void)
> +{
> +       platform_driver_unregister(&w90p910_keypad_driver);
> +}
> +
> +module_init(w90p910_keypad_init);
> +module_exit(w90p910_keypad_exit);
> +
> +MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
> +MODULE_DESCRIPTION("w90p910 keypad driver!");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:w90p910-keypad");
> --
> 1.5.6.3
>
>



-- 
---Trilok Soni
http://triloksoni.wordpress.com
http://www.linkedin.com/in/triloksoni
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html