From: Viresh KUMAR <viresh.kumar@st.com>
To: linux-arm-kernel@lists.infradead.org, rtc-linux@googlegroups.com,
a.zummo@towertech.it, dbrownell@users.sourceforge.net,
linux-usb@vger.kernel.org, linux-input@vger.kernel.org, dmitry
Cc: Viresh Kumar <viresh.kumar@st.com>,
shiraz.hashim@st.com, vipin.kumar@st.com, deepak.sikri@st.com,
armando.visconti@st.com, vipulkumar.samar@st.com,
rajeev-dlh.kumar@st.com, pratyush.anand@st.com,
bhupesh.sharma@st.com
Subject: [PATCH V2 55/69] ST SPEAr3xx: Passing pmx devices address from machine *.c files
Date: Fri, 1 Oct 2010 17:26:15 +0530 [thread overview]
Message-ID: <694da64e36590aafeb8aa214a85f396a1b4dd542.1285933332.git.viresh.kumar@st.com> (raw)
In-Reply-To: <cover.1285933331.git.viresh.kumar@st.com>
In-Reply-To: <cover.1285933331.git.viresh.kumar@st.com>
All spear3xx machines have different pad mux register addresses.
In order to have single image for all spear3xx boards, we need to pass
this address from machine specific files to fix addresses of pmx devs found
in spear3xx.c
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
---
arch/arm/mach-spear3xx/include/mach/generic.h | 11 +++---
arch/arm/mach-spear3xx/spear300.c | 27 +++-----------
arch/arm/mach-spear3xx/spear310.c | 11 ++----
arch/arm/mach-spear3xx/spear320.c | 31 ++--------------
arch/arm/mach-spear3xx/spear3xx.c | 48 +++++++++---------------
5 files changed, 36 insertions(+), 92 deletions(-)
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index 1b97ba8..0412808 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -50,6 +50,7 @@ void __init spear_setup_timer(void);
void __init spear3xx_map_io(void);
void __init spear3xx_init_irq(void);
void __init spear3xx_init(void);
+void spear3xx_pmx_init_addr(struct pmx_driver *driver, unsigned int addr);
/* pad mux declarations */
#define PMX_FIRDA_MASK (1 << 14)
@@ -150,8 +151,8 @@ extern struct pmx_dev pmx_telecom_sdhci_8bit;
extern struct pmx_dev pmx_gpio1;
/* pad multiplexing support */
-#define PAD_MUX_CONFIG_REG 0x99000000
-#define MODE_CONFIG_REG 0x99000004
+#define SPEAR300_PAD_MUX_CONFIG_REG 0x99000000
+#define SPEAR300_MODE_CONFIG_REG 0x99000004
/* Add spear300 machine function declarations here */
void __init spear300_init(void);
@@ -183,7 +184,7 @@ extern struct pmx_dev pmx_uart3_4_5;
extern struct pmx_dev pmx_fsmc;
extern struct pmx_dev pmx_rs485_0_1;
extern struct pmx_dev pmx_tdm0;
-#define PAD_MUX_CONFIG_REG 0xB4000008
+#define SPEAR310_PAD_MUX_CONFIG_REG 0xB4000008
/* Add spear310 machine function declarations here */
void __init spear310_init(void);
@@ -235,8 +236,8 @@ extern struct pmx_dev pmx_smii1;
extern struct pmx_dev pmx_i2c1;
/* pad multiplexing support */
-#define PAD_MUX_CONFIG_REG 0xB300000C
-#define MODE_CONFIG_REG 0xB3000010
+#define SPEAR320_PAD_MUX_CONFIG_REG 0xB300000C
+#define SPEAR320_MODE_CONFIG_REG 0xB3000010
/* Add spear320 machine function declarations here */
void __init spear320_init(void);
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index 2671cfd..9885fe9 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -118,7 +118,6 @@ struct pmx_mode caml_lcd_mode = {
/* Pad multiplexing for FSMC 2 NAND devices */
static struct pmx_mux_reg pmx_fsmc_2_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_FIRDA_MASK,
.value = 0,
},
@@ -142,7 +141,6 @@ struct pmx_dev pmx_fsmc_2_chips = {
/* Pad multiplexing for FSMC 4 NAND devices */
static struct pmx_mux_reg pmx_fsmc_4_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_FIRDA_MASK | PMX_UART0_MASK,
.value = 0,
},
@@ -166,7 +164,6 @@ struct pmx_dev pmx_fsmc_4_chips = {
/* Pad multiplexing for Keyboard device */
static struct pmx_mux_reg pmx_kbd_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = 0x0,
.value = 0,
},
@@ -192,7 +189,6 @@ struct pmx_dev pmx_keyboard = {
/* Pad multiplexing for CLCD device */
static struct pmx_mux_reg pmx_clcd_pfmode_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
.value = 0,
},
@@ -200,7 +196,6 @@ static struct pmx_mux_reg pmx_clcd_pfmode_mux[] = {
static struct pmx_mux_reg pmx_clcd_lcdmode_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_TIMER_3_4_MASK,
.value = 0,
},
@@ -228,7 +223,6 @@ struct pmx_dev pmx_clcd = {
/* Pad multiplexing for Telecom GPIO device */
static struct pmx_mux_reg pmx_gpio_lcdmode_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_MII_MASK,
.value = 0,
},
@@ -236,7 +230,6 @@ static struct pmx_mux_reg pmx_gpio_lcdmode_mux[] = {
static struct pmx_mux_reg pmx_gpio_fonemode_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
.value = 0,
},
@@ -244,7 +237,6 @@ static struct pmx_mux_reg pmx_gpio_fonemode_mux[] = {
static struct pmx_mux_reg pmx_gpio_atai2smode_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_MII_MASK | PMX_TIMER_3_4_MASK,
.value = 0,
},
@@ -252,7 +244,6 @@ static struct pmx_mux_reg pmx_gpio_atai2smode_mux[] = {
static struct pmx_mux_reg pmx_gpio_lendfonemode_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK,
.value = 0,
},
@@ -260,7 +251,6 @@ static struct pmx_mux_reg pmx_gpio_lendfonemode_mux[] = {
static struct pmx_mux_reg pmx_gpio_atawi2smode_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_MII_MASK | PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK
| PMX_UART0_MODEM_MASK,
.value = 0,
@@ -300,7 +290,6 @@ struct pmx_dev pmx_telecom_gpio = {
/* Pad multiplexing for TDM device */
static struct pmx_mux_reg pmx_tdm_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_UART0_MODEM_MASK | PMX_SSP_CS_MASK,
.value = 0,
},
@@ -327,7 +316,6 @@ struct pmx_dev pmx_telecom_tdm = {
/* Pad multiplexing for spi cs i2c device */
static struct pmx_mux_reg pmx_spi_cs_i2c_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
.value = 0,
},
@@ -352,7 +340,6 @@ struct pmx_dev pmx_telecom_spi_cs_i2c_clk = {
static struct pmx_mux_reg pmx_caml_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_MII_MASK,
.value = 0,
},
@@ -360,7 +347,6 @@ static struct pmx_mux_reg pmx_caml_mux[] = {
static struct pmx_mux_reg pmx_camu_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK | PMX_MII_MASK,
.value = 0,
},
@@ -387,7 +373,6 @@ struct pmx_dev pmx_telecom_camera = {
/* Pad multiplexing for dac device */
static struct pmx_mux_reg pmx_dac_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_TIMER_1_2_MASK,
.value = 0,
},
@@ -411,7 +396,6 @@ struct pmx_dev pmx_telecom_dac = {
/* Pad multiplexing for spi cs i2c device */
static struct pmx_mux_reg pmx_i2s_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_UART0_MODEM_MASK,
.value = 0,
},
@@ -437,7 +421,6 @@ struct pmx_dev pmx_telecom_i2s = {
/* Pad multiplexing for bootpins device */
static struct pmx_mux_reg pmx_bootpins_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK |
PMX_TIMER_3_4_MASK,
.value = 0,
@@ -461,7 +444,6 @@ struct pmx_dev pmx_telecom_boot_pins = {
/* Pad multiplexing for sdhci 4bit device */
static struct pmx_mux_reg pmx_sdhci_4bit_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK |
PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK,
@@ -490,7 +472,6 @@ struct pmx_dev pmx_telecom_sdhci_4bit = {
/* Pad multiplexing for spi cs i2c device */
static struct pmx_mux_reg pmx_sdhci_8bit_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK |
PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK | PMX_MII_MASK,
@@ -518,7 +499,6 @@ struct pmx_dev pmx_telecom_sdhci_8bit = {
/* Pad multiplexing for spi cs i2c device */
static struct pmx_mux_reg pmx_gpio1_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_UART0_MODEM_MASK | PMX_TIMER_1_2_MASK |
PMX_TIMER_3_4_MASK,
.value = 0,
@@ -541,7 +521,7 @@ struct pmx_dev pmx_gpio1 = {
/* pmx driver structure */
struct pmx_driver pmx_driver = {
- .mode_reg = {.address = MODE_CONFIG_REG, .mask = 0x0000000f},
+ .mode_reg = {.address = SPEAR300_MODE_CONFIG_REG, .mask = 0x0000000f},
};
/* Add spear300 specific devices here */
@@ -777,7 +757,7 @@ struct spear_shirq shirq_ras1 = {
void sdhci_i2s_mem_enable(u8 mask)
{
u32 val;
- void __iomem *config = ioremap(MODE_CONFIG_REG, SZ_16);
+ void __iomem *config = ioremap(SPEAR300_MODE_CONFIG_REG, SZ_16);
if (!config) {
pr_debug("sdhci_i2s_enb: ioremap fail\n");
return;
@@ -809,6 +789,9 @@ void __init spear300_init(void)
printk(KERN_ERR "Error registering Shared IRQ\n");
}
+ /* This fixes addresses of all pmx devices for spear300 */
+ spear3xx_pmx_init_addr(&pmx_driver, SPEAR300_PAD_MUX_CONFIG_REG);
+
/* pmx initialization */
ret = pmx_register(&pmx_driver);
if (ret)
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index 79f7105..be2f9de 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -26,7 +26,6 @@
/* Pad multiplexing for emi_cs_0_1_4_5 devices */
static struct pmx_mux_reg pmx_emi_cs_0_1_4_5_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_TIMER_3_4_MASK,
.value = 0,
},
@@ -48,7 +47,6 @@ struct pmx_dev pmx_emi_cs_0_1_4_5 = {
/* Pad multiplexing for emi_cs_2_3 devices */
static struct pmx_mux_reg pmx_emi_cs_2_3_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_TIMER_1_2_MASK,
.value = 0,
},
@@ -70,7 +68,6 @@ struct pmx_dev pmx_emi_cs_2_3 = {
/* Pad multiplexing for uart1 device */
static struct pmx_mux_reg pmx_uart1_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_FIRDA_MASK,
.value = 0,
},
@@ -92,7 +89,6 @@ struct pmx_dev pmx_uart1 = {
/* Pad multiplexing for uart2 device */
static struct pmx_mux_reg pmx_uart2_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_TIMER_1_2_MASK,
.value = 0,
},
@@ -114,7 +110,6 @@ struct pmx_dev pmx_uart2 = {
/* Pad multiplexing for uart3_4_5 devices */
static struct pmx_mux_reg pmx_uart3_4_5_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_UART0_MODEM_MASK,
.value = 0,
},
@@ -136,7 +131,6 @@ struct pmx_dev pmx_uart3_4_5 = {
/* Pad multiplexing for fsmc device */
static struct pmx_mux_reg pmx_fsmc_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_SSP_CS_MASK,
.value = 0,
},
@@ -158,7 +152,6 @@ struct pmx_dev pmx_fsmc = {
/* Pad multiplexing for rs485_0_1 devices */
static struct pmx_mux_reg pmx_rs485_0_1_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_MII_MASK,
.value = 0,
},
@@ -180,7 +173,6 @@ struct pmx_dev pmx_rs485_0_1 = {
/* Pad multiplexing for tdm0 device */
static struct pmx_mux_reg pmx_tdm0_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_MII_MASK,
.value = 0,
},
@@ -523,6 +515,9 @@ void __init spear310_init(void)
printk(KERN_ERR "Error registering Shared IRQ 4\n");
}
+ /* This fixes addresses of all pmx devices for spear310 */
+ spear3xx_pmx_init_addr(&pmx_driver, SPEAR310_PAD_MUX_CONFIG_REG);
+
/* pmx initialization */
ret = pmx_register(&pmx_driver);
if (ret)
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index 8481955..bd308b8 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -58,7 +58,6 @@ struct pmx_mode small_printers_mode = {
/* Pad multiplexing for CLCD device */
static struct pmx_mux_reg pmx_clcd_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = 0x0,
.value = 0,
},
@@ -81,7 +80,6 @@ struct pmx_dev pmx_clcd = {
/* Pad multiplexing for EMI (Parallel NOR flash) device */
static struct pmx_mux_reg pmx_emi_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
.value = 0,
},
@@ -104,7 +102,6 @@ struct pmx_dev pmx_emi = {
/* Pad multiplexing for FSMC (NAND flash) device */
static struct pmx_mux_reg pmx_fsmc_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = 0x0,
.value = 0,
},
@@ -127,7 +124,6 @@ struct pmx_dev pmx_fsmc = {
/* Pad multiplexing for SPP device */
static struct pmx_mux_reg pmx_spp_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = 0x0,
.value = 0,
},
@@ -150,7 +146,6 @@ struct pmx_dev pmx_spp = {
/* Pad multiplexing for SDHCI device */
static struct pmx_mux_reg pmx_sdhci_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK,
.value = 0,
},
@@ -174,7 +169,6 @@ struct pmx_dev pmx_sdhci = {
/* Pad multiplexing for I2S device */
static struct pmx_mux_reg pmx_i2s_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_UART0_MODEM_MASK,
.value = 0,
},
@@ -197,7 +191,6 @@ struct pmx_dev pmx_i2s = {
/* Pad multiplexing for UART1 device */
static struct pmx_mux_reg pmx_uart1_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_GPIO_PIN0_MASK | PMX_GPIO_PIN1_MASK,
.value = 0,
},
@@ -220,7 +213,6 @@ struct pmx_dev pmx_uart1 = {
/* Pad multiplexing for UART1 Modem device */
static struct pmx_mux_reg pmx_uart1_modem_autoexp_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_TIMER_1_2_MASK | PMX_TIMER_3_4_MASK |
PMX_SSP_CS_MASK,
.value = 0,
@@ -229,7 +221,6 @@ static struct pmx_mux_reg pmx_uart1_modem_autoexp_mux[] = {
static struct pmx_mux_reg pmx_uart1_modem_smallpri_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_GPIO_PIN3_MASK | PMX_GPIO_PIN4_MASK |
PMX_GPIO_PIN5_MASK | PMX_SSP_CS_MASK,
.value = 0,
@@ -257,7 +248,6 @@ struct pmx_dev pmx_uart1_modem = {
/* Pad multiplexing for UART2 device */
static struct pmx_mux_reg pmx_uart2_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_FIRDA_MASK,
.value = 0,
},
@@ -280,7 +270,6 @@ struct pmx_dev pmx_uart2 = {
/* Pad multiplexing for Touchscreen device */
static struct pmx_mux_reg pmx_touchscreen_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_SSP_CS_MASK,
.value = 0,
},
@@ -303,7 +292,6 @@ struct pmx_dev pmx_touchscreen = {
/* Pad multiplexing for CAN device */
static struct pmx_mux_reg pmx_can_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_GPIO_PIN2_MASK | PMX_GPIO_PIN3_MASK |
PMX_GPIO_PIN4_MASK | PMX_GPIO_PIN5_MASK,
.value = 0,
@@ -327,7 +315,6 @@ struct pmx_dev pmx_can = {
/* Pad multiplexing for SDHCI LED device */
static struct pmx_mux_reg pmx_sdhci_led_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_SSP_CS_MASK,
.value = 0,
},
@@ -350,7 +337,6 @@ struct pmx_dev pmx_sdhci_led = {
/* Pad multiplexing for PWM0 device */
static struct pmx_mux_reg pmx_pwm0_net_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_UART0_MODEM_MASK,
.value = 0,
},
@@ -358,7 +344,6 @@ static struct pmx_mux_reg pmx_pwm0_net_mux[] = {
static struct pmx_mux_reg pmx_pwm0_autoexpsmallpri_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_MII_MASK,
.value = 0,
},
@@ -385,7 +370,6 @@ struct pmx_dev pmx_pwm0 = {
/* Pad multiplexing for PWM1 device */
static struct pmx_mux_reg pmx_pwm1_net_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_UART0_MODEM_MASK,
.value = 0,
},
@@ -393,7 +377,6 @@ static struct pmx_mux_reg pmx_pwm1_net_mux[] = {
static struct pmx_mux_reg pmx_pwm1_autoexpsmallpri_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_MII_MASK,
.value = 0,
},
@@ -420,7 +403,6 @@ struct pmx_dev pmx_pwm1 = {
/* Pad multiplexing for PWM2 device */
static struct pmx_mux_reg pmx_pwm2_net_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_SSP_CS_MASK,
.value = 0,
},
@@ -428,7 +410,6 @@ static struct pmx_mux_reg pmx_pwm2_net_mux[] = {
static struct pmx_mux_reg pmx_pwm2_autoexpsmallpri_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_MII_MASK,
.value = 0,
},
@@ -455,7 +436,6 @@ struct pmx_dev pmx_pwm2 = {
/* Pad multiplexing for PWM3 device */
static struct pmx_mux_reg pmx_pwm3_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_MII_MASK,
.value = 0,
},
@@ -478,7 +458,6 @@ struct pmx_dev pmx_pwm3 = {
/* Pad multiplexing for SSP1 device */
static struct pmx_mux_reg pmx_ssp1_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_MII_MASK,
.value = 0,
},
@@ -501,7 +480,6 @@ struct pmx_dev pmx_ssp1 = {
/* Pad multiplexing for SSP2 device */
static struct pmx_mux_reg pmx_ssp2_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_MII_MASK,
.value = 0,
},
@@ -524,7 +502,6 @@ struct pmx_dev pmx_ssp2 = {
/* Pad multiplexing for mii1 device */
static struct pmx_mux_reg pmx_mii1_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = 0x0,
.value = 0,
},
@@ -547,7 +524,6 @@ struct pmx_dev pmx_mii1 = {
/* Pad multiplexing for smii0 device */
static struct pmx_mux_reg pmx_smii0_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_MII_MASK,
.value = 0,
},
@@ -570,7 +546,6 @@ struct pmx_dev pmx_smii0 = {
/* Pad multiplexing for smii1 device */
static struct pmx_mux_reg pmx_smii1_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_MII_MASK,
.value = 0,
},
@@ -593,7 +568,6 @@ struct pmx_dev pmx_smii1 = {
/* Pad multiplexing for i2c1 device */
static struct pmx_mux_reg pmx_i2c1_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = 0x0,
.value = 0,
},
@@ -615,7 +589,7 @@ struct pmx_dev pmx_i2c1 = {
/* pmx driver structure */
struct pmx_driver pmx_driver = {
- .mode_reg = {.address = MODE_CONFIG_REG, .mask = 0x00000007},
+ .mode_reg = {.address = SPEAR320_MODE_CONFIG_REG, .mask = 0x00000007},
};
/* Add spear320 specific devices here */
@@ -1015,6 +989,9 @@ void __init spear320_init(void)
printk(KERN_ERR "Error registering Shared IRQ 4\n");
}
+ /* This fixes addresses of all pmx devices for spear320 */
+ spear3xx_pmx_init_addr(&pmx_driver, SPEAR320_PAD_MUX_CONFIG_REG);
+
/* pmx initialization */
ret = pmx_register(&pmx_driver);
if (ret)
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index 45a0774..ec1340c 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -297,7 +297,6 @@ void __init spear3xx_map_io(void)
/* Pad multiplexing for firda device */
static struct pmx_mux_reg pmx_firda_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_FIRDA_MASK,
.value = PMX_FIRDA_MASK,
},
@@ -320,7 +319,6 @@ struct pmx_dev pmx_firda = {
/* Pad multiplexing for i2c device */
static struct pmx_mux_reg pmx_i2c_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_I2C_MASK,
.value = PMX_I2C_MASK,
},
@@ -343,7 +341,6 @@ struct pmx_dev pmx_i2c = {
/* Pad multiplexing for firda device */
static struct pmx_mux_reg pmx_ssp_cs_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_SSP_CS_MASK,
.value = PMX_SSP_CS_MASK,
},
@@ -366,7 +363,6 @@ struct pmx_dev pmx_ssp_cs = {
/* Pad multiplexing for ssp device */
static struct pmx_mux_reg pmx_ssp_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_SSP_MASK,
.value = PMX_SSP_MASK,
},
@@ -389,7 +385,6 @@ struct pmx_dev pmx_ssp = {
/* Pad multiplexing for mii device */
static struct pmx_mux_reg pmx_mii_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_MII_MASK,
.value = PMX_MII_MASK,
},
@@ -412,7 +407,6 @@ struct pmx_dev pmx_mii = {
/* Pad multiplexing for gpio pin0 device */
static struct pmx_mux_reg pmx_gpio_pin0_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_GPIO_PIN0_MASK,
.value = PMX_GPIO_PIN0_MASK,
},
@@ -435,7 +429,6 @@ struct pmx_dev pmx_gpio_pin0 = {
/* Pad multiplexing for gpio pin1 device */
static struct pmx_mux_reg pmx_gpio_pin1_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_GPIO_PIN1_MASK,
.value = PMX_GPIO_PIN1_MASK,
},
@@ -458,7 +451,6 @@ struct pmx_dev pmx_gpio_pin1 = {
/* Pad multiplexing for gpio pin2 device */
static struct pmx_mux_reg pmx_gpio_pin2_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_GPIO_PIN2_MASK,
.value = PMX_GPIO_PIN2_MASK,
},
@@ -481,7 +473,6 @@ struct pmx_dev pmx_gpio_pin2 = {
/* Pad multiplexing for gpio pin3 device */
static struct pmx_mux_reg pmx_gpio_pin3_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_GPIO_PIN3_MASK,
.value = PMX_GPIO_PIN3_MASK,
},
@@ -504,7 +495,6 @@ struct pmx_dev pmx_gpio_pin3 = {
/* Pad multiplexing for gpio pin4 device */
static struct pmx_mux_reg pmx_gpio_pin4_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_GPIO_PIN4_MASK,
.value = PMX_GPIO_PIN4_MASK,
},
@@ -527,7 +517,6 @@ struct pmx_dev pmx_gpio_pin4 = {
/* Pad multiplexing for gpio pin5 device */
static struct pmx_mux_reg pmx_gpio_pin5_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_GPIO_PIN5_MASK,
.value = PMX_GPIO_PIN5_MASK,
},
@@ -550,7 +539,6 @@ struct pmx_dev pmx_gpio_pin5 = {
/* Pad multiplexing for uart0 modem device */
static struct pmx_mux_reg pmx_uart0_modem_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_UART0_MODEM_MASK,
.value = PMX_UART0_MODEM_MASK,
},
@@ -573,7 +561,6 @@ struct pmx_dev pmx_uart0_modem = {
/* Pad multiplexing for uart0 device */
static struct pmx_mux_reg pmx_uart0_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_UART0_MASK,
.value = PMX_UART0_MASK,
},
@@ -596,7 +583,6 @@ struct pmx_dev pmx_uart0 = {
/* Pad multiplexing for timer 3, 4 device */
static struct pmx_mux_reg pmx_timer_3_4_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_TIMER_3_4_MASK,
.value = PMX_TIMER_3_4_MASK,
},
@@ -619,7 +605,6 @@ struct pmx_dev pmx_timer_3_4 = {
/* Pad multiplexing for gpio pin0 device */
static struct pmx_mux_reg pmx_timer_1_2_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_TIMER_1_2_MASK,
.value = PMX_TIMER_1_2_MASK,
},
@@ -644,7 +629,6 @@ struct pmx_dev pmx_timer_1_2 = {
/* Pad multiplexing for plgpio_0_1 devices */
static struct pmx_mux_reg pmx_plgpio_0_1_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_FIRDA_MASK,
.value = 0,
},
@@ -667,7 +651,6 @@ struct pmx_dev pmx_plgpio_0_1 = {
/* Pad multiplexing for plgpio_2_3 devices */
static struct pmx_mux_reg pmx_plgpio_2_3_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_UART0_MASK,
.value = 0,
},
@@ -690,7 +673,6 @@ struct pmx_dev pmx_plgpio_2_3 = {
/* Pad multiplexing for plgpio_4_5 devices */
static struct pmx_mux_reg pmx_plgpio_4_5_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_I2C_MASK,
.value = 0,
},
@@ -713,7 +695,6 @@ struct pmx_dev pmx_plgpio_4_5 = {
/* Pad multiplexing for plgpio_6_9 devices */
static struct pmx_mux_reg pmx_plgpio_6_9_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_SSP_MASK,
.value = 0,
},
@@ -736,7 +717,6 @@ struct pmx_dev pmx_plgpio_6_9 = {
/* Pad multiplexing for plgpio_10_27 devices */
static struct pmx_mux_reg pmx_plgpio_10_27_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_MII_MASK,
.value = 0,
},
@@ -759,7 +739,6 @@ struct pmx_dev pmx_plgpio_10_27 = {
/* Pad multiplexing for plgpio_28 devices */
static struct pmx_mux_reg pmx_plgpio_28_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_GPIO_PIN0_MASK,
.value = 0,
},
@@ -782,7 +761,6 @@ struct pmx_dev pmx_plgpio_28 = {
/* Pad multiplexing for plgpio_29 devices */
static struct pmx_mux_reg pmx_plgpio_29_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_GPIO_PIN1_MASK,
.value = 0,
},
@@ -805,7 +783,6 @@ struct pmx_dev pmx_plgpio_29 = {
/* Pad multiplexing for plgpio_30 device */
static struct pmx_mux_reg pmx_plgpio_30_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_GPIO_PIN2_MASK,
.value = 0,
},
@@ -828,7 +805,6 @@ struct pmx_dev pmx_plgpio_30 = {
/* Pad multiplexing for plgpio_31 device */
static struct pmx_mux_reg pmx_plgpio_31_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_GPIO_PIN3_MASK,
.value = 0,
},
@@ -851,7 +827,6 @@ struct pmx_dev pmx_plgpio_31 = {
/* Pad multiplexing for plgpio_32 device */
static struct pmx_mux_reg pmx_plgpio_32_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_GPIO_PIN4_MASK,
.value = 0,
},
@@ -874,7 +849,6 @@ struct pmx_dev pmx_plgpio_32 = {
/* Pad multiplexing for plgpio_33 device */
static struct pmx_mux_reg pmx_plgpio_33_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_GPIO_PIN5_MASK,
.value = 0,
},
@@ -897,7 +871,6 @@ struct pmx_dev pmx_plgpio_33 = {
/* Pad multiplexing for plgpio_34_36 device */
static struct pmx_mux_reg pmx_plgpio_34_36_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_SSP_CS_MASK,
.value = 0,
},
@@ -920,7 +893,6 @@ struct pmx_dev pmx_plgpio_34_36 = {
/* Pad multiplexing for plgpio_37_42 device */
static struct pmx_mux_reg pmx_plgpio_37_42_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_UART0_MODEM_MASK,
.value = 0,
},
@@ -943,7 +915,6 @@ struct pmx_dev pmx_plgpio_37_42 = {
/* Pad multiplexing for plgpio_43_44_47_48 device */
static struct pmx_mux_reg pmx_plgpio_43_44_47_48_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_TIMER_1_2_MASK,
.value = 0,
},
@@ -966,7 +937,6 @@ struct pmx_dev pmx_plgpio_43_44_47_48 = {
/* Pad multiplexing for plgpio_45_46_49_50 device */
static struct pmx_mux_reg pmx_plgpio_45_46_49_50_mux[] = {
{
- .address = PAD_MUX_CONFIG_REG,
.mask = PMX_TIMER_3_4_MASK,
.value = 0,
},
@@ -1017,3 +987,21 @@ static void __init spear3xx_timer_init(void)
struct sys_timer spear3xx_timer = {
.init = spear3xx_timer_init,
};
+
+/* This fixes addresses of all pmx devices for different machines */
+void spear3xx_pmx_init_addr(struct pmx_driver *driver, unsigned int addr)
+{
+ int i;
+ for (i = 0; i < driver->devs_count; i++) {
+ int j;
+ struct pmx_dev *pdev = driver->devs[i];
+
+ for (j = 0; j < pdev->mode_count; j++) {
+ int k;
+ struct pmx_dev_mode *mode = &pdev->modes[j];
+
+ for (k = 0; k < mode->mux_reg_cnt; k++)
+ mode->mux_regs[k].address = addr;
+ }
+ }
+}
--
1.7.2.2
next prev parent reply other threads:[~2010-10-01 11:58 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1285933331.git.viresh.kumar@st.com>
2010-10-01 11:55 ` [PATCH V2 21/69] Keyboard: Adding support for spear-keyboard Viresh KUMAR
2010-10-05 15:47 ` Dmitry Torokhov
[not found] ` <20101005154737.GA19730-WlK9ik9hQGAhIp7JRqBPierSzoNAToWh@public.gmane.org>
2010-10-06 3:58 ` viresh kumar
[not found] ` <4CABF3E0.8010909-qxv4g6HH51o@public.gmane.org>
2010-10-06 6:16 ` Dmitry Torokhov
2010-10-06 7:11 ` viresh kumar
2010-11-10 6:44 ` viresh kumar
2010-10-01 11:55 ` [PATCH V2 22/69] ST SPEAr: Adding machine support for keyboard Viresh KUMAR
2010-10-01 11:55 ` [PATCH V2 25/69] ST SPEAr: Add smi driver for serial NOR flash Viresh KUMAR
2010-10-01 11:55 ` [PATCH V2 26/69] ST SPEAr: Adding support for serial nor flash in all spear platforms Viresh KUMAR
2010-10-01 11:55 ` [PATCH V2 27/69] ST SPEAr: Adding Watchdog support Viresh KUMAR
2010-10-01 11:56 ` [PATCH V2 42/69] SPEAr Power Management: Added the support for Standby mode Viresh KUMAR
2010-10-01 11:56 ` [PATCH V2 44/69] SPEAr CPU freq: Adding support for CPU Freq framework Viresh KUMAR
2010-10-01 11:56 ` [PATCH V2 45/69] ST SPEAr: PCIE gadget suppport Viresh KUMAR
2010-10-19 21:47 ` Andrew Morton
2010-10-21 14:18 ` Pratyush ANAND
2010-10-21 17:25 ` Andrew Morton
2010-10-01 11:56 ` [PATCH V2 46/69] ST SPEAr13xx: Adding machine support for pci gadget Viresh KUMAR
2010-10-01 11:56 ` [PATCH V2 47/69] ST SPEAr13xx: Adding CPU hotplug support added for SMP platforms Viresh KUMAR
2010-10-01 11:56 ` [PATCH V2 50/69] ST SPEAr13xx: Modified static mappings Viresh KUMAR
2010-10-01 11:56 ` [PATCH V2 52/69] SPEAr : Pad multiplexing handling modified Viresh KUMAR
2010-10-01 11:56 ` [PATCH V2 53/69] SPEAr13xx : Fixed part devices in SPEAr13xx addded to the generic implementation Viresh KUMAR
2010-10-01 11:56 ` Viresh KUMAR [this message]
2010-10-01 11:56 ` [PATCH V2 56/69] ST SPEAr Clock Framework: Updating for single image solution Viresh KUMAR
2010-10-01 11:56 ` [PATCH V2 57/69] SPEAr3xx: Make local structures static Viresh KUMAR
2010-10-01 11:56 ` [PATCH V2 58/69] SPEAR3xx: Rename register/irq defines to remove naming conflicts Viresh KUMAR
2010-10-01 11:56 ` [PATCH V2 59/69] SPEAr3xx: Rework pmx_dev code to remove conflicts Viresh KUMAR
2010-10-01 11:56 ` [PATCH V2 60/69] SPEAr3xx: Rework KConfig to allow all boards to be compiled in Viresh KUMAR
2010-10-01 11:56 ` [PATCH V2 61/69] SPEAr3xx: Replace defconfigs with single unified defconfig Viresh KUMAR
2010-10-01 11:56 ` [PATCH V2 62/69] ST SPEAr: Appending spear3** with global structures Viresh KUMAR
2010-10-01 16:21 ` viresh kumar
[not found] ` <AANLkTi=xNoG2T1Q2JqB7TH+O7AjW++UnSt1Q85VgPbzp-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2010-10-04 6:01 ` viresh kumar
2010-10-01 11:56 ` [PATCH V2 63/69] ST SPEAr3xx: Updating plgpio and emi source to make it compliant with single image strategy Viresh KUMAR
2010-10-01 11:56 ` [PATCH V2 64/69] SPEAr6xx: Rework Kconfig for single image solution Viresh KUMAR
2010-10-01 11:56 ` [PATCH V2 65/69] ST SPEAR6xx: renaming spear600_defconfig as spear6xx_defconfig Viresh KUMAR
2010-10-01 11:56 ` [PATCH V2 66/69] ST SPEAr13xx: Pass default padmux settings as parameter to spear13**_init routine Viresh KUMAR
2010-10-01 11:56 ` [PATCH V2 68/69] ST SPEAr: Adding information in Documentation/ and MAINTAINERS Viresh KUMAR
[not found] ` <cover.1285933331.git.viresh.kumar-qxv4g6HH51o@public.gmane.org>
2010-10-01 11:55 ` [PATCH V2 23/69] ST SPEAr: Added ARM PL061 GPIO Support on SPEAr13xx and modified resource size Viresh KUMAR
2010-10-01 11:55 ` [PATCH V2 24/69] ST SPEAr: Adding support for ST's PWM IP Viresh KUMAR
2010-10-01 11:55 ` [PATCH V2 28/69] ST SPEAr: Adding machine support for nand Viresh KUMAR
2010-10-01 11:55 ` [PATCH V2 29/69] Newly erased page read workaround Viresh KUMAR
2010-10-01 11:55 ` [PATCH V2 30/69] ST SPEAr: Added PCIE host controller base driver support Viresh KUMAR
2010-10-01 11:55 ` [PATCH V2 31/69] ST SPEAr: Adding support for SSP PL022 Viresh KUMAR
2010-10-01 11:55 ` [PATCH V2 32/69] ST SPEAr: Adding support for SDHCI (SDIO) Viresh KUMAR
2010-10-01 11:55 ` [PATCH V2 33/69] ST SPEAr: Changing resource size of amba devices to SZ_4K Viresh KUMAR
2010-10-01 11:55 ` [PATCH V2 34/69] ST SPEAr: Replacing SIZE macro's with actual required size Viresh KUMAR
2010-10-01 11:55 ` [PATCH V2 35/69] SPEAr: defines base addresses as ulong Viresh KUMAR
2010-10-01 11:55 ` [PATCH V2 36/69] ST SPEAr: Adding miscellaneous devices Viresh KUMAR
2010-10-01 11:55 ` [PATCH V2 37/69] ST SPEAr 13xx : Adding support for SPEAr1310 Viresh KUMAR
2010-10-01 11:55 ` [PATCH V2 38/69] ST SPEAr: Adding support for DDR in clock framework Viresh KUMAR
2010-10-01 11:55 ` [PATCH V2 39/69] ST SPEAr : EMI (Extrenal Memory Interface) controller driver Viresh KUMAR
2010-10-01 11:56 ` [PATCH V2 40/69] ST SPEAr : FSMC (Flexible Static Memory Controller) NOR interface driver Viresh KUMAR
2010-10-01 11:56 ` [PATCH V2 41/69] SPEAr Clock Framework: Adding support for PLL frequency change Viresh KUMAR
2010-10-01 11:56 ` [PATCH V2 43/69] GIC: Added dummy handlers for Power Management Suspend Resume Viresh KUMAR
2010-10-01 11:56 ` [PATCH V2 48/69] ST SPEAr: replace readl, writel with __raw_readl, __raw_writel in uncompress.h Viresh KUMAR
2010-10-01 11:56 ` [PATCH V2 49/69] ST SPEAr13xx: add L2 cache support Viresh KUMAR
2010-10-01 11:56 ` [PATCH V2 51/69] SPEAr: Adding and Updating Clock definitions Viresh KUMAR
2010-10-01 11:56 ` [PATCH V2 54/69] SPEAr : Updating pad multiplexing support Viresh KUMAR
2010-10-01 11:56 ` [PATCH V2 67/69] ST SPEAr: Adding devices & clocks Viresh KUMAR
2010-10-01 11:56 ` [PATCH V2 69/69] ST SPEAr: Updating defconfigs Viresh KUMAR
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=694da64e36590aafeb8aa214a85f396a1b4dd542.1285933332.git.viresh.kumar@st.com \
--to=viresh.kumar@st.com \
--cc=a.zummo@towertech.it \
--cc=armando.visconti@st.com \
--cc=bhupesh.sharma@st.com \
--cc=dbrownell@users.sourceforge.net \
--cc=deepak.sikri@st.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=pratyush.anand@st.com \
--cc=rajeev-dlh.kumar@st.com \
--cc=rtc-linux@googlegroups.com \
--cc=shiraz.hashim@st.com \
--cc=vipin.kumar@st.com \
--cc=vipulkumar.samar@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).