Re: [PATCH] Input: soc_button_array - Add support for INT33D3 tablet-mode switch devices

[Hans de Goede <hdegoede@redhat.com>]

Hi,

This should have been 2/2 of a set of 2, let me resend, sorry.

Regards,

Hans


On 5/14/20 10:51 PM, Hans de Goede wrote:
> According to the Microsoft documentation for Windows 8 convertible
> devices, these devices should implement a PNP0C60 "laptop/slate mode state
> indicator" ACPI device.
> 
> This device can work in 2 ways, if there is a GPIO which directly
> indicates the device is in tablet-mode or not then the direct-gpio mode
> should be used. If there is no such GPIO, but instead the events are
> coming from e.g. the embedded-controller, then there should still be
> a PNP0C60 ACPI device and event-injection should be used to send the
> events. The drivers/platform/x86/intel-vbtn.c code is an example from
> a standardized manner of doing the latter.
> 
> On various 2-in-1s with either a detachable keyboard, or with 360°
> hinges, the direct GPIO mode is indicated by an ACPI device with a
> HID of INT33D3, which contains a single GpioInt in its ACPI resource
> table, which directly indicates if the device is in tablet-mode or not.
> 
> This commit adds support for this to the soc_button_array code, as
> well as for the alternative ID9001 HID which some devices use
> instead of the INT33D3 HID.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
>   drivers/input/misc/soc_button_array.c | 11 +++++++++++
>   1 file changed, 11 insertions(+)
> 
> diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c
> index e3a22a61f5d9..837c787e9c4b 100644
> --- a/drivers/input/misc/soc_button_array.c
> +++ b/drivers/input/misc/soc_button_array.c
> @@ -397,6 +397,15 @@ static const struct soc_device_data soc_device_PNP0C40 = {
>   	.button_info = soc_button_PNP0C40,
>   };
>   
> +static const struct soc_button_info soc_button_INT33D3[] = {
> +	{ "tablet_mode", 0, EV_SW, SW_TABLET_MODE, false, false, false },
> +	{ }
> +};
> +
> +static const struct soc_device_data soc_device_INT33D3 = {
> +	.button_info = soc_button_INT33D3,
> +};
> +
>   /*
>    * Special device check for Surface Book 2 and Surface Pro (2017).
>    * Both, the Surface Pro 4 (surfacepro3_button.c) and the above mentioned
> @@ -459,6 +468,8 @@ static const struct soc_device_data soc_device_MSHW0040 = {
>   
>   static const struct acpi_device_id soc_button_acpi_match[] = {
>   	{ "PNP0C40", (unsigned long)&soc_device_PNP0C40 },
> +	{ "INT33D3", (unsigned long)&soc_device_INT33D3 },
> +	{ "ID9001", (unsigned long)&soc_device_INT33D3 },
>   	{ "ACPI0011", 0 },
>   
>   	/* Microsoft Surface Devices (5th and 6th generation) */
>