linux-input.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Werner Sembach <wse@tuxedocomputers.com>
To: hdegoede@redhat.com, Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 2/2] Input: atkbd - Correctly map F13 - F24
Date: Tue, 11 Mar 2025 19:10:42 +0100	[thread overview]
Message-ID: <83ea44f6-c0ad-4cb0-a16e-dd4fa17b63c7@tuxedocomputers.com> (raw)
In-Reply-To: <20250311180643.1107430-2-wse@tuxedocomputers.com>

Hi Hans, Hi Dimitry,

resending this too on the v2 to not cause confusion:

Regarding remapping KEY_ZENKAKUHANKAKU to KEY_TOUCHPAD_TOGGLE:

Am 11.03.25 um 19:06 schrieb Werner Sembach:
> Currently only F23 is correctly mapped for PS/2 keyboards.
>
> Following to this table:
> https://download.microsoft.com/download/1/6/1/161ba512-40e2-4cc9-843a-923143f3456c/translate.pdf
>
> - F24 and Zenkaku/Hankaku share the same scancode, but since in real world
> Zenkaku/Hankaku keys seem to just use the tilde scancode, this patch binds the
> scancode to F24. Note that on userspace side the KEY_ZENKAKUHANKAKU keycode is
> currently not bound in xkeyboard-config, so it is (mostly*) unused anyway.

I think what the firmware vendor actually wanted to do was to send 
ctrl+super+f24 upon touchpad toggle. This would somewhat fall in line with, for 
example, the copilot key being implemented as shift+super+f23.

Following this, my suggestion is to do this remapping and handle the rest in 
xkeyboard-config

>
> * Qt on Wayland and therefore KDE on Wayland can see the keypress anyway for
> some reason and it is actually used in a touchpad toggle shortcut, but this is
> currently being fixed in both KDE and xkeyboard-config to make this less weird,
> so it could directly be fixed to correctly handle the F24 keypress instead.
>
> - The scancodes for F13-F22 are currently unmapped so there will probably be no
> harm in mapping them. This would also fix the issue that some of these keys
> can't be mapped as the target from userspace using the `setkeycodes` command.

This is optional. I can split it off if wanted.

Best regards,

Werner

>
> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
> ---
>   drivers/input/keyboard/atkbd.c | 12 ++++++------
>   1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
> index 3598a21d9d014..4bd6e6ef0715e 100644
> --- a/drivers/input/keyboard/atkbd.c
> +++ b/drivers/input/keyboard/atkbd.c
> @@ -84,12 +84,12 @@ static const unsigned short atkbd_set2_keycode[ATKBD_KEYMAP_SIZE] = {
>   #include "hpps2atkbd.h"	/* include the keyboard scancodes */
>   
>   #else
> -	  0, 67, 65, 63, 61, 59, 60, 88,  0, 68, 66, 64, 62, 15, 41,117,
> -	  0, 56, 42, 93, 29, 16,  2,  0,  0,  0, 44, 31, 30, 17,  3,  0,
> -	  0, 46, 45, 32, 18,  5,  4, 95,  0, 57, 47, 33, 20, 19,  6,183,
> -	  0, 49, 48, 35, 34, 21,  7,184,  0,  0, 50, 36, 22,  8,  9,185,
> -	  0, 51, 37, 23, 24, 11, 10,  0,  0, 52, 53, 38, 39, 25, 12,  0,
> -	  0, 89, 40,  0, 26, 13,  0,193, 58, 54, 28, 27,  0, 43,  0, 85,
> +	  0, 67, 65, 63, 61, 59, 60, 88,183, 68, 66, 64, 62, 15, 41,117,
> +	184, 56, 42, 93, 29, 16,  2,  0,185,  0, 44, 31, 30, 17,  3,  0,
> +	186, 46, 45, 32, 18,  5,  4, 95,187, 57, 47, 33, 20, 19,  6,183,
> +	188, 49, 48, 35, 34, 21,  7,184,189,  0, 50, 36, 22,  8,  9,185,
> +	190, 51, 37, 23, 24, 11, 10,  0,191, 52, 53, 38, 39, 25, 12,  0,
> +	192, 89, 40,  0, 26, 13,  0,193, 58, 54, 28, 27,  0, 43,  0,194,
>   	  0, 86, 91, 90, 92,  0, 14, 94,  0, 79,124, 75, 71,121,  0,  0,
>   	 82, 83, 80, 76, 77, 72,  1, 69, 87, 78, 81, 74, 55, 73, 70, 99,
>   

  reply	other threads:[~2025-03-11 18:10 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-11 18:06 [PATCH v2 1/2] Input: atkbd - Map FN-key for TongFang barebones Werner Sembach
2025-03-11 18:06 ` [PATCH v2 2/2] Input: atkbd - Correctly map F13 - F24 Werner Sembach
2025-03-11 18:10   ` Werner Sembach [this message]
2025-03-17 12:06     ` Hans de Goede
2025-03-17 16:47       ` Werner Sembach
2025-03-17 22:22         ` Hans de Goede
2025-03-18 10:20           ` Werner Sembach
2025-03-25 13:18             ` Werner Sembach
2025-03-17 11:58   ` Hans de Goede
2025-03-17 17:00     ` Werner Sembach
2025-03-17 22:23       ` Hans de Goede
2025-03-18 10:21         ` Werner Sembach
2025-05-15 12:26         ` Werner Sembach
2025-07-21 20:36           ` Werner Sembach
2025-07-22  7:04             ` Hans de Goede
2025-07-22 11:53               ` Werner Sembach
2025-03-11 18:07 ` [PATCH v2 1/2] Input: atkbd - Map FN-key for TongFang barebones Werner Sembach
2025-03-17 11:04 ` Hans de Goede
2025-03-17 15:50   ` Werner Sembach

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=83ea44f6-c0ad-4cb0-a16e-dd4fa17b63c7@tuxedocomputers.com \
    --to=wse@tuxedocomputers.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=hdegoede@redhat.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).