Re: [PATCH 1/2] dt-bindings: input: cirrus,cs40l50: Support for CS40L50

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 08/08/2023 19:25, James Ogletree wrote:
> Introduce device tree bindings for the initial commit
> of the CS40L50 driver.
> 
> Change-Id: I95369831f947cb32a0a80e81923fd28ace888481

Please run scripts/checkpatch.pl and fix reported warnings. Some
warnings can be ignored, but the code here looks like it needs a fix.
Feel free to get in touch if the warning is not clear.

> Signed-off-by: James Ogletree <james.ogletree@cirrus.com>
> ---
>  .../bindings/input/cirrus,cs40l50.yaml        | 77 +++++++++++++++++++
>  MAINTAINERS                                   |  9 +++
>  2 files changed, 86 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/cirrus,cs40l50.yaml
> 
> diff --git a/Documentation/devicetree/bindings/input/cirrus,cs40l50.yaml b/Documentation/devicetree/bindings/input/cirrus,cs40l50.yaml
> new file mode 100644
> index 000000000000..5437c6beb1b3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/cirrus,cs40l50.yaml
> @@ -0,0 +1,77 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/cirrus,cs40l50.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Cirrus Logic CS40L50 Advanced Haptic Driver

Driver as "motor"? If yes, then ok. If "Linux Driver" then not.

> +
> +maintainers:
> +  - James Ogletree <james.ogletree@cirrus.com>
> +
> +description:
> +  CS40L50 is a Haptic Driver with Waveform Memory DSP
> +  and Closed-Loop Algorithms
> +
> +properties:
> +  compatible:
> +    enum:
> +      - cirrus,cs40l50
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +  VA-supply:
> +    description: Regulator for analog voltage

Keep lowercase, so "va-supply".

> +
> +  VP-supply:
> +    description: Regulator for peak voltage

ditto

> +
> +  VIO-supply:
> +    description: Regulator for digital IO voltage

ditto

> +
> +  cirrus,external-boost:
> +    description:
> +      Bypass the CS40L50 boost converter.
> +
> +      The amplifier on CS40L50 can be powered internally through the boost
> +      converter, or else can be powered using an external supply. If an
> +      external VA supply is used, the boost converter must be bypassed.
> +    type: boolean

Isn't this property then conflicting with va-supply?

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - reset-gpios
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/input/input.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      cs40l50@34 {

Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

> +        compatible = "cirrus,cs40l50";
> +        reg = <0x34>;
> +        interrupt-parent = <&gpio>;
> +        interrupts = <113 IRQ_TYPE_LEVEL_LOW>;
> +        reset-gpios = <&gpio 112 GPIO_ACTIVE_LOW>;
> +        VA-supply = <&dummy_vreg>;

s/dummy_//

> +        VP-supply = <&dummy_vreg>;

s/dummy_//

> +        VIO-supply = <&dummy_vreg>;

s/dummy_//

> +        cirrus,external-boost;
> +      };
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 54ef320bb689..016e5ff3b831 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2081,6 +2081,15 @@ F:	arch/arm/boot/compressed/misc-ep93xx.h
>  F:	arch/arm/mach-ep93xx/
>  F:	drivers/iio/adc/ep93xx_adc.c
>  
> +CIRRUS LOGIC HAPTICS DRIVER
> +M:	James Ogletree <james.ogletree@cirrus.com>
> +M:	Fred Treven <fred.treven@cirrus.com>
> +M:	Ben Bright <ben.bright@cirrus.com>
> +L:	patches@Qopensource.cirrus.com

No typo in email? Qopensource?

> +S:	Supported
> +T:	git https://github.com/CirrusLogic/linux-drivers.git

We do not have real maintenance entries for individual drivers, thus no
git trees. Who is going to pull from your tree? Is your GPG key in
kernel.org keyring? I propose to drop the tree reference.

> +F:	Documentation/devicetree/bindings/input/cirrus,cs40l50.yaml
> +
>  ARM/CLKDEV SUPPORT
>  M:	Russell King <linux@armlinux.org.uk>
>  L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)

Best regards,
Krzysztof