From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Cc: Hans de Goede <hdegoede@redhat.com>,
markgross@kernel.org, basavaraj.natikar@amd.com,
jikos@kernel.org, benjamin.tissoires@redhat.com,
alexander.deucher@amd.com, christian.koenig@amd.com,
Xinhui.Pan@amd.com, airlied@gmail.com, daniel@ffwll.ch,
Patil.Reddy@amd.com, mario.limonciello@amd.com,
platform-driver-x86@vger.kernel.org, linux-input@vger.kernel.org,
amd-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org
Subject: Re: [PATCH v4 13/17] platform/x86/amd/pmf: Add PMF-AMDGPU get interface
Date: Wed, 18 Oct 2023 12:20:09 +0300 (EEST) [thread overview]
Message-ID: <9e6c4a42-fbce-c5ea-15ce-5eb22fc3767a@linux.intel.com> (raw)
In-Reply-To: <20231018070241.2041529-14-Shyam-sundar.S-k@amd.com>
On Wed, 18 Oct 2023, Shyam Sundar S K wrote:
> In order to provide GPU inputs to TA for the Smart PC solution to work, we
> need to have interface between the PMF driver and the AMDGPU driver.
>
> Add the initial code path for get interface from AMDGPU.
>
> Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
> ---
> drivers/gpu/drm/amd/amdgpu/Makefile | 2 +
> drivers/gpu/drm/amd/amdgpu/amdgpu.h | 1 +
> drivers/gpu/drm/amd/amdgpu/amdgpu_pmf.c | 138 ++++++++++++++++++++++++
> drivers/platform/x86/amd/pmf/Kconfig | 1 +
> drivers/platform/x86/amd/pmf/core.c | 1 +
> drivers/platform/x86/amd/pmf/pmf.h | 3 +
> drivers/platform/x86/amd/pmf/spc.c | 13 +++
> drivers/platform/x86/amd/pmf/tee-if.c | 26 +++++
> include/linux/amd-pmf-io.h | 35 ++++++
> 9 files changed, 220 insertions(+)
> create mode 100644 drivers/gpu/drm/amd/amdgpu/amdgpu_pmf.c
> create mode 100644 include/linux/amd-pmf-io.h
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/Makefile b/drivers/gpu/drm/amd/amdgpu/Makefile
> index 384b798a9bad..7fafccefbd7a 100644
> --- a/drivers/gpu/drm/amd/amdgpu/Makefile
> +++ b/drivers/gpu/drm/amd/amdgpu/Makefile
> @@ -86,6 +86,8 @@ amdgpu-$(CONFIG_PROC_FS) += amdgpu_fdinfo.o
>
> amdgpu-$(CONFIG_PERF_EVENTS) += amdgpu_pmu.o
>
> +amdgpu-$(CONFIG_AMD_PMF) += amdgpu_pmf.o
> +
> # add asic specific block
> amdgpu-$(CONFIG_DRM_AMDGPU_CIK)+= cik.o cik_ih.o \
> dce_v8_0.o gfx_v7_0.o cik_sdma.o uvd_v4_2.o vce_v2_0.o
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
> index a79d53bdbe13..26ffa1b4fe57 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
> @@ -50,6 +50,7 @@
> #include <linux/hashtable.h>
> #include <linux/dma-fence.h>
> #include <linux/pci.h>
> +#include <linux/amd-pmf-io.h>
>
> #include <drm/ttm/ttm_bo.h>
> #include <drm/ttm/ttm_placement.h>
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pmf.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_pmf.c
> new file mode 100644
> index 000000000000..ac981848df50
> --- /dev/null
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pmf.c
> @@ -0,0 +1,138 @@
> +/*
> + * Copyright 2023 Advanced Micro Devices, Inc.
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
> + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
This is MIT, right? Add the required SPDX-License-Identifier line for it
at the top of the file, thank you.
> + *
> + * Author: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
> + *
> + */
Remove the extra empty line at the end of the comment.
> +
> +#include <linux/backlight.h>
> +#include "amdgpu.h"
> +
> +int amd_pmf_get_gfx_data(struct amd_gpu_pmf_data *pmf)
> +{
> + struct drm_device *drm_dev = pci_get_drvdata(pmf->gpu_dev);
> + struct drm_mode_config *mode_config = &drm_dev->mode_config;
> + struct amdgpu_device *adev = drm_to_adev(drm_dev);
> + struct drm_connector_list_iter iter;
> + struct drm_connector *connector;
> + int i = 0;
> +
> + /* Reset the count to zero */
> + pmf->display_count = 0;
> + if (!(adev->flags & AMD_IS_APU)) {
> + DRM_ERROR("PMF-AMDGPU interface not supported\n");
> + return -ENODEV;
> + }
> +
> + mutex_lock(&mode_config->mutex);
> + drm_connector_list_iter_begin(drm_dev, &iter);
> + drm_for_each_connector_iter(connector, &iter) {
> + if (connector->status == connector_status_connected)
> + pmf->display_count++;
> + if (connector->status != pmf->con_status[i])
> + pmf->con_status[i] = connector->status;
> + if (connector->connector_type != pmf->connector_type[i])
> + pmf->connector_type[i] = connector->connector_type;
> +
> + i++;
> + if (i >= MAX_SUPPORTED)
> + break;
> + }
> + drm_connector_list_iter_end(&iter);
> + mutex_unlock(&mode_config->mutex);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(amd_pmf_get_gfx_data);
> +
> +static int amd_pmf_gpu_get_cur_state(struct thermal_cooling_device *cooling_dev,
> + unsigned long *state)
> +{
> + struct backlight_device *bd;
> +
> + if (!acpi_video_backlight_use_native())
> + return -ENODEV;
> +
> + bd = backlight_device_get_by_type(BACKLIGHT_RAW);
> + if (!bd)
> + return -ENODEV;
> +
> + *state = backlight_get_brightness(bd);
> +
> + return 0;
> +}
> +
> +static int amd_pmf_gpu_get_max_state(struct thermal_cooling_device *cooling_dev,
> + unsigned long *state)
> +{
> + struct backlight_device *bd;
> +
> + if (!acpi_video_backlight_use_native())
> + return -ENODEV;
> +
> + bd = backlight_device_get_by_type(BACKLIGHT_RAW);
> + if (!bd)
> + return -ENODEV;
> +
> + if (backlight_is_blank(bd))
> + *state = 0;
> + else
> + *state = bd->props.max_brightness;
> +
> + return 0;
> +}
> +
> +static const struct thermal_cooling_device_ops bd_cooling_ops = {
> + .get_max_state = amd_pmf_gpu_get_max_state,
> + .get_cur_state = amd_pmf_gpu_get_cur_state,
> +};
> +
> +int amd_pmf_gpu_init(struct amd_gpu_pmf_data *pmf)
> +{
> + struct drm_device *drm_dev = pci_get_drvdata(pmf->gpu_dev);
> + struct amdgpu_device *adev = drm_to_adev(drm_dev);
> +
> + if (!(adev->flags & AMD_IS_APU)) {
> + DRM_ERROR("PMF-AMDGPU interface not supported\n");
> + return -ENODEV;
> + }
> +
> + if (!acpi_video_backlight_use_native())
> + return -ENODEV;
> +
> + pmf->raw_bd = backlight_device_get_by_type(BACKLIGHT_RAW);
> + if (!pmf->raw_bd)
> + return -ENODEV;
> +
> + pmf->cooling_dev = thermal_cooling_device_register("pmf_gpu_bd",
> + pmf, &bd_cooling_ops);
> + if (IS_ERR(pmf->cooling_dev))
> + return -ENODEV;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(amd_pmf_gpu_init);
> +
> +void amd_pmf_gpu_deinit(struct amd_gpu_pmf_data *pmf)
> +{
> + thermal_cooling_device_unregister(pmf->cooling_dev);
> +}
> +EXPORT_SYMBOL_GPL(amd_pmf_gpu_deinit);
> diff --git a/drivers/platform/x86/amd/pmf/Kconfig b/drivers/platform/x86/amd/pmf/Kconfig
> index f246252bddd8..7f430de7af44 100644
> --- a/drivers/platform/x86/amd/pmf/Kconfig
> +++ b/drivers/platform/x86/amd/pmf/Kconfig
> @@ -10,6 +10,7 @@ config AMD_PMF
> depends on AMD_NB
> select ACPI_PLATFORM_PROFILE
> depends on TEE && AMDTEE
> + depends on DRM_AMDGPU
> help
> This driver provides support for the AMD Platform Management Framework.
> The goal is to enhance end user experience by making AMD PCs smarter,
> diff --git a/drivers/platform/x86/amd/pmf/core.c b/drivers/platform/x86/amd/pmf/core.c
> index 4b8156033fa6..c59ba527ff49 100644
> --- a/drivers/platform/x86/amd/pmf/core.c
> +++ b/drivers/platform/x86/amd/pmf/core.c
> @@ -411,6 +411,7 @@ static int amd_pmf_probe(struct platform_device *pdev)
> }
>
> dev->cpu_id = rdev->device;
> + dev->root = rdev;
>
> err = amd_smn_read(0, AMD_PMF_BASE_ADDR_LO, &val);
> if (err) {
> diff --git a/drivers/platform/x86/amd/pmf/pmf.h b/drivers/platform/x86/amd/pmf/pmf.h
> index 8712299ad52b..615cd3a31986 100644
> --- a/drivers/platform/x86/amd/pmf/pmf.h
> +++ b/drivers/platform/x86/amd/pmf/pmf.h
> @@ -13,6 +13,7 @@
>
> #include <linux/acpi.h>
> #include <linux/platform_profile.h>
> +#include <linux/amd-pmf-io.h>
>
> #define POLICY_BUF_MAX_SZ 0x4b000
> #define POLICY_SIGN_COOKIE 0x31535024
> @@ -228,9 +229,11 @@ struct amd_pmf_dev {
> void *shbuf;
> struct delayed_work pb_work;
> struct pmf_action_table *prev_data;
> + struct amd_gpu_pmf_data gfx_data;
> u64 policy_addr;
> void *policy_base;
> bool smart_pc_enabled;
> + struct pci_dev *root;
> };
>
> struct apmf_sps_prop_granular {
> diff --git a/drivers/platform/x86/amd/pmf/spc.c b/drivers/platform/x86/amd/pmf/spc.c
> index 512e0c66efdc..cf4962ef97c2 100644
> --- a/drivers/platform/x86/amd/pmf/spc.c
> +++ b/drivers/platform/x86/amd/pmf/spc.c
> @@ -44,6 +44,10 @@ void amd_pmf_dump_ta_inputs(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *
> dev_dbg(dev->dev, "Max C0 Residency : %u\n", in->ev_info.max_c0residency);
> dev_dbg(dev->dev, "GFX Busy : %u\n", in->ev_info.gfx_busy);
> dev_dbg(dev->dev, "Connected Display Count : %u\n", in->ev_info.monitor_count);
> + dev_dbg(dev->dev, "Primary Display Type : %s\n",
> + drm_get_connector_type_name(in->ev_info.display_type));
> + dev_dbg(dev->dev, "Primary Display State : %s\n", in->ev_info.display_state ?
> + "Connected" : "disconnected/unknown");
> dev_dbg(dev->dev, "LID State : %s\n", in->ev_info.lid_state ? "Close" : "Open");
> dev_dbg(dev->dev, "==== TA inputs END ====\n");
> }
> @@ -146,6 +150,14 @@ static int amd_pmf_get_slider_info(struct amd_pmf_dev *dev, struct ta_pmf_enact_
> return 0;
> }
>
> +static void amd_pmf_get_gpu_info(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *in)
> +{
> + amd_pmf_get_gfx_data(&dev->gfx_data);
> + in->ev_info.monitor_count = dev->gfx_data.display_count;
> + in->ev_info.display_type = dev->gfx_data.connector_type[0];
> + in->ev_info.display_state = dev->gfx_data.con_status[0];
> +}
> +
> void amd_pmf_populate_ta_inputs(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *in)
> {
> /* TA side lid open is 1 and close is 0, hence the ! here */
> @@ -154,4 +166,5 @@ void amd_pmf_populate_ta_inputs(struct amd_pmf_dev *dev, struct ta_pmf_enact_tab
> amd_pmf_get_smu_info(dev, in);
> amd_pmf_get_battery_info(dev, in);
> amd_pmf_get_slider_info(dev, in);
> + amd_pmf_get_gpu_info(dev, in);
> }
> diff --git a/drivers/platform/x86/amd/pmf/tee-if.c b/drivers/platform/x86/amd/pmf/tee-if.c
> index 2f5fb8623c20..956e66b78605 100644
> --- a/drivers/platform/x86/amd/pmf/tee-if.c
> +++ b/drivers/platform/x86/amd/pmf/tee-if.c
> @@ -9,6 +9,7 @@
> */
>
> #include <linux/debugfs.h>
> +#include <linux/pci.h>
> #include <linux/tee_drv.h>
> #include <linux/uuid.h>
> #include "pmf.h"
> @@ -357,6 +358,19 @@ static int amd_pmf_get_bios_buffer(struct amd_pmf_dev *dev)
> return amd_pmf_start_policy_engine(dev);
> }
>
> +static int amd_pmf_get_gpu_handle(struct pci_dev *pdev, void *data)
> +{
> + struct amd_pmf_dev *dev = data;
> +
> + if (pdev->vendor == PCI_VENDOR_ID_ATI && pdev->devfn == 0) {
> + /* Found the amdgpu handle from the pci root after walking through the pci bus */
If you insist on having this comment, make it a function comment instead
(with appropriate modifications into the content of it) but I personally
don't find it that useful so it could be just dropped as well, IMO.
> + dev->gfx_data.gpu_dev = pdev;
> + return 1; /* Stop walking */
> + }
> +
> + return 0; /* Continue walking */
> +}
> +
> static int amd_pmf_amdtee_ta_match(struct tee_ioctl_version_data *ver, const void *data)
> {
> return ver->impl_id == TEE_IMPL_ID_AMDTEE;
> @@ -446,6 +460,15 @@ int amd_pmf_init_smart_pc(struct amd_pmf_dev *dev)
> INIT_DELAYED_WORK(&dev->pb_work, amd_pmf_invoke_cmd);
> amd_pmf_set_dram_addr(dev);
> amd_pmf_get_bios_buffer(dev);
> +
> + /* Get amdgpu handle */
Useless comment.
> + pci_walk_bus(dev->root->bus, amd_pmf_get_gpu_handle, dev);
> + if (!dev->gfx_data.gpu_dev)
> + dev_err(dev->dev, "GPU handle not found!\n");
> +
> + if (!amd_pmf_gpu_init(&dev->gfx_data))
> + dev->gfx_data.gpu_dev_en = true;
> +
> dev->prev_data = kzalloc(sizeof(*dev->prev_data), GFP_KERNEL);
> if (!dev->prev_data)
> return -ENOMEM;
> @@ -461,5 +484,8 @@ void amd_pmf_deinit_smart_pc(struct amd_pmf_dev *dev)
> kfree(dev->prev_data);
> kfree(dev->policy_buf);
> cancel_delayed_work_sync(&dev->pb_work);
> + if (dev->gfx_data.gpu_dev_en)
> + amd_pmf_gpu_deinit(&dev->gfx_data);
> + pci_dev_put(dev->gfx_data.gpu_dev);
> amd_pmf_tee_deinit(dev);
> }
> diff --git a/include/linux/amd-pmf-io.h b/include/linux/amd-pmf-io.h
> new file mode 100644
> index 000000000000..5f79e66a41b3
> --- /dev/null
> +++ b/include/linux/amd-pmf-io.h
> @@ -0,0 +1,35 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * AMD Platform Management Framework Interface
> + *
> + * Copyright (c) 2023, Advanced Micro Devices, Inc.
> + * All Rights Reserved.
> + *
> + * Author: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
> + */
> +
> +#ifndef AMD_PMF_IO_H
> +#define AMD_PMF_IO_H
> +
> +#include <acpi/video.h>
> +#include <drm/drm_connector.h>
> +#include <linux/backlight.h>
> +#include <linux/thermal.h>
> +
> +#define MAX_SUPPORTED 4
> +
> +/* amdgpu */
Document the structure properly with kerneldoc instead of an unhelpful
comment like above :-). Please also check if you add any other structs
into kernel-wide headers that you didn't document yet. Or fields into
existing structs.
> +struct amd_gpu_pmf_data {
> + struct pci_dev *gpu_dev;
> + struct backlight_device *raw_bd;
> + struct thermal_cooling_device *cooling_dev;
> + enum drm_connector_status con_status[MAX_SUPPORTED];
> + int display_count;
> + int connector_type[MAX_SUPPORTED];
> + bool gpu_dev_en;
> +};
> +
> +int amd_pmf_get_gfx_data(struct amd_gpu_pmf_data *pmf);
> +int amd_pmf_gpu_init(struct amd_gpu_pmf_data *pmf);
> +void amd_pmf_gpu_deinit(struct amd_gpu_pmf_data *pmf);
> +#endif
>
--
i.
next prev parent reply other threads:[~2023-10-18 9:20 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-18 7:02 [PATCH v4 00/17] Introduce PMF Smart PC Solution Builder Feature Shyam Sundar S K
2023-10-18 7:02 ` [PATCH v4 01/17] platform/x86/amd/pmf: Add PMF TEE interface Shyam Sundar S K
2023-10-18 7:02 ` [PATCH v4 02/17] platform/x86/amd/pmf: Add support for PMF-TA interaction Shyam Sundar S K
2023-10-18 7:02 ` [PATCH v4 03/17] platform/x86/amd/pmf: Change return type of amd_pmf_set_dram_addr() Shyam Sundar S K
2023-10-18 7:02 ` [PATCH v4 04/17] platform/x86/amd/pmf: Add support for PMF Policy Binary Shyam Sundar S K
2023-10-18 7:02 ` [PATCH v4 05/17] platform/x86/amd/pmf: change amd_pmf_init_features() call sequence Shyam Sundar S K
2023-10-18 7:02 ` [PATCH v4 06/17] platform/x86/amd/pmf: Add support to get inputs from other subsystems Shyam Sundar S K
2023-10-18 7:02 ` [PATCH v4 07/17] platform/x86/amd/pmf: Add support update p3t limit Shyam Sundar S K
2023-10-18 7:02 ` [PATCH v4 08/17] platform/x86/amd/pmf: Add support to update system state Shyam Sundar S K
2023-10-18 7:02 ` [PATCH v4 09/17] platform/x86/amd/pmf: Make source_as_str() as non-static Shyam Sundar S K
2023-10-18 7:02 ` [PATCH v4 10/17] platform/x86/amd/pmf: Add facility to dump TA inputs Shyam Sundar S K
2023-10-18 9:00 ` Ilpo Järvinen
2023-11-17 7:46 ` Shyam Sundar S K
2023-10-18 7:02 ` [PATCH v4 11/17] platform/x86/amd/pmf: Add capability to sideload of policy binary Shyam Sundar S K
2023-10-18 10:21 ` Ilpo Järvinen
2023-10-18 7:02 ` [PATCH v4 12/17] platform/x86/amd/pmf: dump policy binary data Shyam Sundar S K
2023-10-18 10:09 ` Ilpo Järvinen
2023-10-18 7:02 ` [PATCH v4 13/17] platform/x86/amd/pmf: Add PMF-AMDGPU get interface Shyam Sundar S K
2023-10-18 9:20 ` Ilpo Järvinen [this message]
2023-10-18 9:28 ` Shyam Sundar S K
2023-10-18 9:37 ` Ilpo Järvinen
2023-10-18 13:40 ` Christian König
2023-10-18 15:47 ` Mario Limonciello
2023-10-18 16:07 ` Christian König
2023-10-18 17:05 ` Shyam Sundar S K
2023-10-19 9:01 ` Christian König
2023-11-17 8:00 ` Shyam Sundar S K
2023-10-18 19:08 ` Hans de Goede
2023-11-17 8:04 ` Shyam Sundar S K
2023-10-18 7:02 ` [PATCH v4 14/17] platform/x86/amd/pmf: Add PMF-AMDGPU set interface Shyam Sundar S K
2023-10-18 7:02 ` [PATCH v4 15/17] HID: amd_sfh: rename float_to_int() to amd_sfh_float_to_int() Shyam Sundar S K
2023-10-18 8:15 ` Ilpo Järvinen
2023-10-18 7:02 ` [PATCH v4 16/17] platform/x86/amd/pmf: Add PMF-AMDSFH interface for HPD Shyam Sundar S K
2023-10-18 8:29 ` Ilpo Järvinen
2023-10-18 7:02 ` [PATCH v4 17/17] platform/x86/amd/pmf: Add PMF-AMDSFH interface for ALS Shyam Sundar S K
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9e6c4a42-fbce-c5ea-15ce-5eb22fc3767a@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=Patil.Reddy@amd.com \
--cc=Shyam-sundar.S-k@amd.com \
--cc=Xinhui.Pan@amd.com \
--cc=airlied@gmail.com \
--cc=alexander.deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=basavaraj.natikar@amd.com \
--cc=benjamin.tissoires@redhat.com \
--cc=christian.koenig@amd.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=hdegoede@redhat.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=mario.limonciello@amd.com \
--cc=markgross@kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).